I'm told it's bad to reuse a used clutch, is this true?
Thread Starter
Member
iTrader: (1)
Joined: Oct 2000
Posts: 396
Likes: 0
From: Toms River, NJ
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: T56 6-Speed
I'm told it's bad to reuse a used clutch, is this true?
Doing a T56 swap, the trannie I'm getting has a centerforce dual friction clutch with only a few hundreded miles on it, but the guy selling it insists that I should not reused a used clutch? It is to my understanding that when most people do the t56 swap they get the clutch and all from the donar car... but in any case is this true or not? I don't see how there can be anything wrong with something thats practically brand new.. anyways someone plz let me know on this! thanks
------------------
1991 Camaro Z28
------------------
CURRENT MODS:
350 TPI, Automatic, Edelbrock Headers, Edelbrock Runners, Edelbrock Intake, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000, 2 JL Audio 12W3 subwoofers in custom hatch enclosure,
Rockford BD1000.1 Amp, Infinity Kappa 4x6" plates & 6x9's
WEBMASTER: www.thirdgenfbodies.com
------------------
1991 Camaro Z28
------------------
CURRENT MODS:
350 TPI, Automatic, Edelbrock Headers, Edelbrock Runners, Edelbrock Intake, Flowmaster Exhaust, MSD 8.5mm wires, Autolite Double Platinum Plugs, MSD Cap/Rotar, Random Technology high flow cat, Hypertech Power Chip (160 Deg Thermo), K&N Filterchargers
STEREO MODS:
Pioneer DEH-P6000, 2 JL Audio 12W3 subwoofers in custom hatch enclosure,
Rockford BD1000.1 Amp, Infinity Kappa 4x6" plates & 6x9's
WEBMASTER: www.thirdgenfbodies.com
Joined: Mar 2000
Posts: 5,703
Likes: 132
From: Orange, CA
Car: '90 Trans Am-12.45@110.71
Engine: 355 w/AFR 195's Elem. 400/430 HP/TQ
Transmission: Tremec T-56
Axle/Gears: 12 Bolt 3.73
Well, he has been using it so he must know what it is worth. On the other hand, " if it ain't broke don't fix it".
Personally I would sell it and buy something better, like a McLeod.
------------------
Chronologically challenged. But still kicking!
'92 CAMARO RS
305 TBI 5/spd (now TPI)
B4C Alt.
'69 camaro-BB/Lenco,1050 dominators, /Pump Gas/no drugs 8.97-150+/3200lbs.
SoCal Thirdgen F-Bodies
Personally I would sell it and buy something better, like a McLeod.
------------------
Chronologically challenged. But still kicking!
'92 CAMARO RS
305 TBI 5/spd (now TPI)
B4C Alt.
'69 camaro-BB/Lenco,1050 dominators, /Pump Gas/no drugs 8.97-150+/3200lbs.
SoCal Thirdgen F-Bodies
Thread Starter
Member
iTrader: (1)
Joined: Oct 2000
Posts: 396
Likes: 0
From: Toms River, NJ
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: T56 6-Speed
Where can I find a Mcloed clutch at? Money is VERY tight at the moment with this swap so I can't go very expensive, this is gonna be my first manaul car so I don't know too much about clutches, if someone can give me a few idea's on what the difference is between aftermarket and stock clutches? i dont have the slighest clue.. does mcelod have a website? thanks alot
Thread
Thread Starter
Forum
Replies
Last Post
backtothe80s
Suspension and Chassis
33
Sep 5, 2015 12:39 AM
rsrmoore
Transmissions and Drivetrain
1
Aug 7, 2015 08:44 PM






