need help with dakota box on t56
Thread Starter
Member
iTrader: (4)
Joined: Aug 2005
Posts: 326
Likes: 1
From: edmonton alberta canada
Car: 91 rs,1 92 rs,92 b4c/1le
Engine: 5.0tbi,5.7 tune port/5.0tpi
Transmission: 5spdx2 and t56
Axle/Gears: 3.08,3.73,3.42
need help with dakota box on t56
anyone want to share how the hooked there dakoata box up power and ground is easy i have a 91 camaro so i have the yellow to the output but not sure where to connect ground and how to connect t56 speed sensor and help??
thanks
thanks
Supreme Member
iTrader: (3)
Joined: Sep 2003
Posts: 6,859
Likes: 14
From: Cypress, California
Car: 1989 GTA
Engine: 369 TPI
Transmission: 4L60E
Axle/Gears: 3.70 Nine Bolt
Re: need help with dakota box on t56
I just did this but with an A4 and using a TCI transmission controller.
If I had your system I would first try it this way using application #2 in the directions. The yellow wire from the VSS would go to Speed Input Signal. I would put the Purple Wire from the VSS to ground.
I would take the yellow wire from the ECM(B10 in my case) and put it in out 2. I would take the purple wire from the ECM(B9 in my case) and put it in sensor ground.
If I had your system I would first try it this way using application #2 in the directions. The yellow wire from the VSS would go to Speed Input Signal. I would put the Purple Wire from the VSS to ground.
I would take the yellow wire from the ECM(B10 in my case) and put it in out 2. I would take the purple wire from the ECM(B9 in my case) and put it in sensor ground.
Thread
Thread Starter
Forum
Replies
Last Post
camaro1185
Engine/Drivetrain/Suspension Parts for Sale
4
Oct 26, 2015 06:51 AM
topteam54
Engine/Drivetrain/Suspension Parts for Sale
9
Oct 6, 2015 12:21 AM
el_muerte
Engine/Drivetrain/Suspension Wanted
0
Sep 16, 2015 12:01 AM
mygta87
Engine/Drivetrain/Suspension Wanted
0
Sep 14, 2015 10:36 PM
