Hey guys, I did a search and read through quite a few threads, just looking for some final thoughts before I pull the tranny.

The cars an '88 iroc 350-700r4 with just over 100k kms (60k miles)
first and second gears work properly but when it shifts into drive the car revs up and car slows down. I tried skipping 3rd and shifting directly to OD but I get the same result. Basically it slips once its out of 2nd.
I smelled the fluid and it doesn't really seem/smell burnt but I didn't really drive it much since this happened.
I'm assuming the transmission needs to be replaced and I have found a used replacement, just wondered if theres anything I should check before I start pulling it.
Thanks guys, Great forum by the way, its been tons of help with my project so far.

 

It sounds like your 3-4 clutches are wasted. I wish I had a better answer but you need to pull it and replace it.

 

yup and without tearing down that used one its kind of a gamble whether it is good or not. If your in northern california area I have a friend selling one that was working good recently rebuild for 300 bucks. not interested in shipping it anywhere.

 

I think your right, it sucks.
I got the tranny pulled outta the car yesterday and just picked up the used one this evening. the guy I bought it off of claims it worked when pulled, so I guess I'll take my chances.
Hopefully I can get it up and running soon.
Thanks for the reply!

 

a little too far for me, im in ab canada.
thanks for the offer though!

 

Yesterday appeared my tranny have exactly the same problem.
Will 700r4 from gmc vandura 2500 (2wd) fit my camaro or I need tranny from another f-body