series2 to3
Thread Starter
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
series2 to3
i have an auburn posi with 3:08 and have a open with a 3:42,from reading looks like i'll need a spacer for the 3:42 to the series 2 3:08 pos. this is all for
E.P.P.(Experimental Parts Project) i've been playing with since last spring
my goal is to build something fun with whatever parts i already have with minimal $$$ spent on things needed. When i had the blower and slicks,it just fell on face at track from the line,now it's just carb'd with drive to the track,run a few passes,drive it home and think the 3:42 will be a help on 60' times
http://www.cardomain.com/ride/215974...evrolet-camaro
E.P.P.(Experimental Parts Project) i've been playing with since last spring
my goal is to build something fun with whatever parts i already have with minimal $$$ spent on things needed. When i had the blower and slicks,it just fell on face at track from the line,now it's just carb'd with drive to the track,run a few passes,drive it home and think the 3:42 will be a help on 60' times
http://www.cardomain.com/ride/215974...evrolet-camaro
Last edited by hwcoll95; Feb 12, 2012 at 01:27 PM. Reason: forgot to add link
Thread Starter
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
Re: series2 to3
is Mr.Gasket 900A a usuable spacer,it's listed as 8.2 ring gear? i thought i had 7.625 ?
Thread
Thread Starter
Forum
Replies
Last Post
Pierced_Zombie
Theoretical and Street Racing
5
Dec 18, 2009 01:48 PM