Confirmation on TCC wiring
Thread Starter
Member
Joined: Apr 2011
Posts: 128
Likes: 0
From: Adelaide
Car: '84 Trans Am
Engine: 305
Transmission: Auto
Confirmation on TCC wiring
Hi all.
Just want to confirm how to wire the TCC without the ECM.
After reading on here I am leaning towards this:
Pink wire to brake switch stays as is.
Tan/Blk and Light Blue: do they just get wired together, OR with a switch so I can control the lock up, or even better a vacuum switch between them?
Hope this makes sense.
cheers.
Jonno.
Just want to confirm how to wire the TCC without the ECM.
After reading on here I am leaning towards this:
Pink wire to brake switch stays as is.
Tan/Blk and Light Blue: do they just get wired together, OR with a switch so I can control the lock up, or even better a vacuum switch between them?
Hope this makes sense.
cheers.
Jonno.
Joined: Aug 1999
Posts: 5,261
Likes: 461
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Confirmation on TCC wiring
Here's how I do it,..... Use ported Vaccum for the vacuum switch.
There's a "Sticky" that covers this in the CARB forum too.
https://www.thirdgen.org/forums/carb...c-control.html
There's a "Sticky" that covers this in the CARB forum too.
https://www.thirdgen.org/forums/carb...c-control.html
Thread
Thread Starter
Forum
Replies
Last Post
