Iroc Auto to Manual swap. Seeking list
#1
Junior Member
Thread Starter
Join Date: Jan 2012
Location: PA
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z28
Engine: 350tpi
Iroc Auto to Manual swap. Seeking list
I've googled around found some helpful list, but i am looking to confirm.
I found a manual car thats making its way to junk yard, and got the guy to sell me a few things first including all the manual stuff.
What do I all need to swap from my auto.
Pilot Bushing (N)
Flywheel (S)
Clutch Disc (N)
Pressure Plate (N)
Release Bearing (N)
Bellhousing W/Release fork from an F-body (S)
Transmission from an F-body (S)
Either Hydraulic or manual release mechanism (S)
Clutch/Brake pedal assembly, entire assy, not just pedals (S)
Shifter (S)
Lower shift boot (S)
Upper console swap with upper shift boot (The console is cut for the shifter throw) (S)
This is what I got so far.
But what about all the wiring and such?
I found a manual car thats making its way to junk yard, and got the guy to sell me a few things first including all the manual stuff.
What do I all need to swap from my auto.
Pilot Bushing (N)
Flywheel (S)
Clutch Disc (N)
Pressure Plate (N)
Release Bearing (N)
Bellhousing W/Release fork from an F-body (S)
Transmission from an F-body (S)
Either Hydraulic or manual release mechanism (S)
Clutch/Brake pedal assembly, entire assy, not just pedals (S)
Shifter (S)
Lower shift boot (S)
Upper console swap with upper shift boot (The console is cut for the shifter throw) (S)
This is what I got so far.
But what about all the wiring and such?
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM