Evaporator Housing pic please!
Thread Starter
Member
Joined: Dec 2002
Posts: 203
Likes: 0
From: Washington, Seattle
Car: 1992 Camaro RS
Engine: 3.1 MPFI
Transmission: 700R4
Evaporator Housing pic please!
OK well i need one.......or at least a good desciption of where it is........i cant for the life of me find it. THanks
Supreme Member
Joined: Mar 2000
Posts: 13,414
Likes: 6
From: Central NJ, USA
Car: 1986 Firebird
Engine: 2.8 V6
Transmission: 700R4
You need to find a picture? Or you need to find the evaporator housing?
It's on the passenger side of the firewall. It's the thing the blower motor is screwed into. It's a two-part piece, the top can be unbolted from the bottom. This allows servicing of the evaporator itself.
Oh the evaporator is the a/c unit that the silver can (accumulator) connects to. If you're popping the top off the heater/evap box, be careful because the clearance between the top of the evaporator and the cowl lip is VERY CLOSE- if you get frustrated, you can easily crack the box. And yep, it'll crack, it's some kind of combination of fiberglass and plastic.
It's on the passenger side of the firewall. It's the thing the blower motor is screwed into. It's a two-part piece, the top can be unbolted from the bottom. This allows servicing of the evaporator itself.
Oh the evaporator is the a/c unit that the silver can (accumulator) connects to. If you're popping the top off the heater/evap box, be careful because the clearance between the top of the evaporator and the cowl lip is VERY CLOSE- if you get frustrated, you can easily crack the box. And yep, it'll crack, it's some kind of combination of fiberglass and plastic.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
13
Oct 3, 2015 12:43 PM
