Do the 3.1s have a MAF, or do they just use the MAP sensor, because I was told to check my MAF due to a problem but I don't think i have one.
Supreme Member
pop the hood look at the intake ducting, if you see somthing that looks like a big black plastic coffee mug thats says maf on it its your maf.
Supreme Member
90+ are MAP-only stock. Check the vacuum line to your MAP for cracks or loose rubber connectors.
Supreme Member
Nixon1
Supreme Member
close
- Join DateJul 2001
- LocationPalm Bay, Florida, USA
- Posts:3,931
- iTrader Positive Feedback0
- iTrader Feedback Score(0)
- Car95 E-150 & 07 Kawasaki ZX-6R
- EngineA slow one & a fast one
- TransmissionA bad one & a good one
- Axle/GearsA weak one & a chained one
- Likes:0
- Liked:0 Times in 0 Posts
Who told you to check your MAF? They weren't looking under the hood at this point in time were they?? If so, disregard their comments, close your hood, get in the car and drive away briskly.
But seriously-what made them say to check it. A check engine code pulled, something about the way the car ran, etc.?
But seriously-what made them say to check it. A check engine code pulled, something about the way the car ran, etc.?
same problem i have posted on her a few times, the engine speed slowing down while i'm driving like someone was forcing the throttle back up when i had it at a cruise, it lopes. and no the hood wasn't up,
and i took off the hose to the map and blew through it, its clean with no leaks
and i took off the hose to the map and blew through it, its clean with no leaks