V6 Discussion and questions about the base carbureted or MPFI V6's and the rare SFI Turbo V6.

Somebody please help!!!!!

Old 03-07-2005, 08:52 PM
  #1  
Member

Thread Starter
iTrader: (1)
 
MakeitQuick92RS's Avatar
 
Join Date: May 2004
Location: Miami, FL
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Pontiac Trans Am
Engine: 383 Stroker
Transmission: T-5
Axle/Gears: Borg Warner 9-Bolt, with 3.42 Gears
Somebody please help!!!!!

So this is what I got.

I start the car up and it is fine. No Idle surge nothing. Warms up Idles fine as well. The problem is whe I hit the brakes to slow down. As the RPMs decrease it will surge. When the car has almost stopped completely it will jump from about
500 rpm - 1500 rpm and then it will eventually even out. Just cleaned the TPS sensor, and all the ignition stuff is less than a year old (plugs, wires, coil, cap, rotor).

What I recently did to the car (today 3/7/04) Was install a set of Edelbrock Valve covers (No Baffles). Could it be my PCV Valve sucking up oil? But if it was wouldn't the car run crummy all the time? I really need help guys I am leaving on a trip to orlando on friday and I don't want the car to die on the way up. Please Help...

Fellow F-body owner in need!!!!
Old 03-07-2005, 09:01 PM
  #2  
TGO Supporter

iTrader: (12)
 
Dale's Avatar
 
Join Date: Jun 2002
Location: AR
Posts: 6,819
Likes: 0
Received 2 Likes on 2 Posts
Car: 1991 Camaro RS Vert
Engine: 350 S-TPI
Transmission: T5
Axle/Gears: GU5/G80/J65
It worked fine before you installed valve covers?

I say you have a vaccume leak.
Old 03-07-2005, 09:16 PM
  #3  
Member

Thread Starter
iTrader: (1)
 
MakeitQuick92RS's Avatar
 
Join Date: May 2004
Location: Miami, FL
Posts: 143
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Pontiac Trans Am
Engine: 383 Stroker
Transmission: T-5
Axle/Gears: Borg Warner 9-Bolt, with 3.42 Gears
Well it didn't work perfect before the valve covers either...
So i'm going to check that too though.
Old 03-07-2005, 11:00 PM
  #4  
Member

 
myvmax1's Avatar
 
Join Date: Jul 2004
Location: IL
Posts: 421
Likes: 0
Received 0 Likes on 0 Posts
Car: 91RS, 91RS
Engine: 305TBI, 3.1MP
Transmission: WCT5, TH700
You cleaned the throttle positionin sensor, so I assume you cleaned the entire throttle body. If not, then do that becasue my car did the same thing and a TB cleaning fixed it right up. But Dale has a point, does kinda sound like a vacume leak. Did you use all new gaskets when you reasembled the TB? If not then that could be your problem.


Max


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:43 PM.