60 Degree V6 website alot of info!!!
04-25-2005, 09:35 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: evans mills, ny 13637
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Car: v8 powered s10, 2.8 powered s10
Engine: 350 tbi / 383 tbi, 2.8 tbi
Transmission: TH700-R4, t-5
60 Degree V6 website alot of info!!!
Hey I found this site for the GM 60 degree V6. Lots of really good info and tech bits, check it out @:
www.60DegreeV6.com
-dirty_dann
www.60DegreeV6.com
-dirty_dann
04-25-2005, 10:05 PM
#2
Supreme Member
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,113
Likes: 0
Received 5 Likes
on
5 Posts
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Been there, seen that. Its like v6firebird not really set up for us 3rd gens guys. more about the newer 60* engines or the 4th gen. This is the place for 3rd gens. If not. I would be posting it.
04-26-2005, 04:05 PM
#3
Senior Member
Join Date: Oct 2004
Location: Smithfield, NC
Posts: 575
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro SC
Engine: 2.8L MPFI (rebuilt)
Transmission: 700R4 swapped to T5
Axle/Gears: 3.42 open
I posted about that site last November.
https://www.thirdgen.org/techbb2/sho...hreadid=268892
Lots of good info there, but mostly for newer, larger, ohc engines. Not a whole lot of discussion about the pushrod 2.8 and 3.1's that our cars have.
https://www.thirdgen.org/techbb2/sho...hreadid=268892
Lots of good info there, but mostly for newer, larger, ohc engines. Not a whole lot of discussion about the pushrod 2.8 and 3.1's that our cars have.
Thread
Thread Starter
Forum
Replies
Last Post
