well i decided to keep the car and just put in a 350 like i always wanted to.
anyways the majority of the parts on this car were replaced this past winter and only have 50 miles on them until the oil pump died and i got a spare 350 laying around begging to be put in. the only part that isnt any good is the alternator. alot of the parts were professionally painted mettalic blue to match the cars exterior at my shop, then when i installed them i didnt tighten the fuel pressure gauge and spray gas on all over them and melted the paint on some spots. the only thing im keeping is the nitrous kit and probally the transmission. PM me if interested in anything.

Everything in red has been sold

PORTED/POLISHED HEADS:
Stock heads with full port/polish and three angle valve job. also has brand new springs/locks/retainers. $275 +shipping.

Intake Manifold(s) all three have a mild port/polish job $25 ea. or $70 for all + shipping.

1.6 ratio roller rockers - $125 + shipping
comp cams high energy push rods - $20 + shipping
Throttle body - $10 + shipping
Valve Covers - $20 both + shipping
Delta Custom Ground Cam with Lifters - $60 + shipping (PM me for specs)
Brand New Timming Chain - $15 + shipping
Brand New Distributor - $50 + shipping
Brand New MSD Cap/rotor - $15 + shipping
Brand New MSD Blaster Coil - $35 + shipping
Brand New Starter - $30 + shipping
1 year old MAF(new not reman) - $35 + shipping
Pacesetter headers (wit y pipe) - $150 + shipping
Dynomax Bullets 2-1/4 - $40 each or $70 both + shippping
Hooker Chrome tips (never used) 2-1/4 - $35 both + shipping
Brand New K&N filters(2) -$30 + shipping
Stock Fuel Rail with harness - $10 + shipping
19lbs injectors(8) less then 20xxx. (they worked awesome on my car) - $50 + shipping
1 year old radiator (very clean) - $50 + shipping
1 year old water pump - $15 + shipping
Brand New Radiator Hoses upper/lower - $10 both + shipping

NewCold Fusion wet NITROUS KIT 50-200 shot. with dual purge kit, bottle and all accesories - $335 shipped! needs to go.


Also i have 4 american racing outlaw I rims and 4 dunlop gt qualifer rimes with white raised letters. rims are in good shape look awesome from 10ft away, no rust just starting to lose thier finish. tires were brand new middle of last summer ans still have good amount of tread. make an offer.


if there is any thing else you need or want to konw if i got ask i got a bunch of parts for this car. also pm me if you are interesetd in aything.

 

engine block and transmission are coming out of the car this weekend, and will be for sale. also the drive shaft and rear end. make an offer, or i will part them out for you.

 

So these are from an 2.8 V6?

If you'd be willing to ship to Finland I could buy a load of that stuff for a package deal...........

 

yup they are all from a 87 2.8 shipping is no problem just let me know what you need and we will work somthing out, ive got a million other things for this to, i just didnt fell like typing anymore when i wrote this up.

 

I'll PM you later this week or by the weekend about those parts.

 

sounds good, i also got a new nitrous kit for the 2.8 thats adjustable from 50-200 shot. that is if your looking for some real power out of your 6pack.

 

how much do you want for the engine block?

 

i dont want to ship the block. i just dont want to have to deal with that. unless you live near by we can work somthing out.

 

Is that a stock size radiator? If so how clean? (pics?)

How much for those pacesetters shipped to 97601?

Thanks.

 

PM sent

 

if for some reason you have a hard time selling the headers and y-pipe i'll take it off your hands, but i can't justify spending more then 100$+shipping for headers for may daily. anyway keep me in mind if it goes to a OBO situation.

good luck with your 350 swap. i looove driving my GTA w/350TPI. POWER!

 

It's not that bad using freight. If you get it on a pallet, they will come to you and throw it on the truck. I recently was going to buy an engine from someone in NY (to FL) and it was going to be $160. The shortblock weighs 180lbs minus the water pump and timing cover.

 

Hey pairtoe, you should update your list to see what you have sold and what not, still have my eye on one or two things from your list.

 

If he doesn't update then I already grabbed the cam, lifters, pushrods, and rocker rollers.

 

every thing in red is sold.

 

updated list

 

Few questions

Is the throttle body bigger than a stock TB?
Are the K&N Filters for an airbox?

 

who got the heads???

 

Me.

 

updated

 

UPDATE: still have the heads.

 

Too bad I wasn't staying with "heavy metal" Got my 3500 heads last night...



BUMP

 

dont want to high-jack my own thread but hows the car comming along?

 

Still gathering parts, the block should be in my garge mid-Aug.

 

Don't know if you have them or not based on your list, but I thought I'd ask if you had any 3.1 injectors.

 

yeah the injectors im selling will fit a 3.1 they are a little bigger than stock. they are 19/lbs but they work fine and dont need tunning to get the car to run/idle

 

I'll try to get back to you sometime either this week or next week about the injectors. I think either mine are shot or they're plugged. If my school has an injector cleaning machine or something similar, I'm going to try cleaning them (car sat over the winter in storage). If the cleaning don't help, then I suppose I'll be looking for new injectors.
Probably a dumb ???, but these will just drop right in without any stock ECM tuning, right?

 

yeah they dont need any tunning to run. they went right in my car and ran fine. then run a little righer than stock though becasue they are bigger.

 

lowered prices. need this stuff gone its taking up room. Nitrous Kit need to go!

 

prices lowered. still need to get rid of this stuff.

 

Are you going to swap the V6 fuel pump for a V8. If so how much for the V6 fuel pump to 15963.

 

V6 timing cover needed very badly!!!! how much if avaiable

 

fuel pump is staying in for now.

timming cover pm sent.

 

will the injectors work on 3.1 if so I will take them. Have paypal can pay asap

 

yes they injectors will work.

 

how much shipped to 98277 can paypal you right away

 

pm sent

 

Any pics of the Hooker Chrome tips?

Is the throttle body stock or bigger?

 

throttle body is stock, and chrome tips are sold just forgot to highlight them.

 

still got the nitrous kit? If so PM me please!

 

I'll take the TB if you still have it.

 

pm sent

 

list updated and pms sent

 

is this trans a 5spd???? im looking for a 5spd trans from a v6?? know anyone trying to sell one.

 

no tranny is a automatic.

 

id like to have a front nose and front lower ground effect. how about a 350?? i need these parts !!!! and a dash pad or new dash .

 

He's just parting out the parts from his V6 build, he is planning on swapping in a 350.

 

thats about right, thanks 2.8RS.

 

i need the nitrous kit gone, i lowered the price again. I spent over $500 for kit and purge kit and extra lines and never even used it.