performance upgrades for 3.1L?
performance upgrades for 3.1L?
I have a 91 camaro RS with a 3.1L that was rebuilt and has 35,000 miles on it. I'm 18 and on a limited budget but i was wondering what you would recommend to start increasing performance and horsepower.
Supreme Member
iTrader: (1)
Joined: Mar 2005
Posts: 1,089
Likes: 0
From: Western PA
Car: 91 Camaro
Engine: 3.1/3100 in progress...Turbo Soon
Transmission: 700r4
Re: performance upgrades for 3.1L?
LINK
I would start there. I think most people will say to start with the exhaust. Get a high flow cat and a cat back, and if you still have some money get a set of headers(if you dont have emissions in your area).
I would start there. I think most people will say to start with the exhaust. Get a high flow cat and a cat back, and if you still have some money get a set of headers(if you dont have emissions in your area).
Re: performance upgrades for 3.1L?
I have a fully stock 3.1L MPI Camaro RS. What do you guys think would be the most cost-effective way to increase horsepower? I was considering Headers as my first upgrade. I have also read a bit about taking the plenom from a FWD pontiac V6. Does anybody know anything about that?
Senior Member
Joined: Nov 2008
Posts: 467
Likes: 0
From: Batavia Area, NY
Car: 91 Firebird, 06 Dodge Ram 1500 SLT
Engine: 3.1L, 4.7L
Transmission: 700r4, 45RFE
Axle/Gears: 3.23 open, 3.55?
Re: performance upgrades for 3.1L?
I have a fully stock 3.1L MPI Camaro RS. What do you guys think would be the most cost-effective way to increase horsepower? I was considering Headers as my first upgrade. I have also read a bit about taking the plenom from a FWD pontiac V6. Does anybody know anything about that?
function on the top right corner when your in a section. That will illiminate the same questions that are answered every week. Since you are new we like to let it pass over and just let you know about the function.Now to get to your question. There are alot of things you can do to a 3.1l to get better performance. It all depends on your budget and mechanical/fab skills. The FWD top end swap is considered a big swap. I would start with the basics. Here is a good link for the basics. http://thirdgenmods.firebirdv6.com/
BEFORE you start modding your car you need to make sure everything is back to stock running order or better. I would start with a full tune up and make sure everything runs the way it is supposed to. You will notice the best gains if you start off with a solid baseline. Maybe someone can get you the link for the tune-up guidelines. I think Tom-P did a nice article on this...it might have been some else tho. I seem to have misplaced the link somewhere in my bookmarks to tell for sure.
Good luck and welcome to TGO
Re: performance upgrades for 3.1L?
I believe this is what mtwlkn122 is refering to?
https://www.thirdgen.org/forums/v6/6...or-tuneup.html
https://www.thirdgen.org/forums/v6/6...or-tuneup.html
Senior Member
Joined: Nov 2008
Posts: 467
Likes: 0
From: Batavia Area, NY
Car: 91 Firebird, 06 Dodge Ram 1500 SLT
Engine: 3.1L, 4.7L
Transmission: 700r4, 45RFE
Axle/Gears: 3.23 open, 3.55?
Re: performance upgrades for 3.1L?
I believe this is what mtwlkn122 is refering to?
https://www.thirdgen.org/forums/v6/6...or-tuneup.html
https://www.thirdgen.org/forums/v6/6...or-tuneup.html
Supreme Member
iTrader: (2)
Joined: May 2007
Posts: 2,574
Likes: 0
From: right behind you
Car: '85 maro
Engine: In the works...
Transmission: TH700 R4
Axle/Gears: 3.73 posi
Re: performance upgrades for 3.1L?
Gears. Won't give you any more power but it's the most economical way to get more fun out of it.
Thread
Thread Starter
Forum
Replies
Last Post





