Hello,
Anybody knows the reference of the engine block cap for a 1990 3.1 V6?

I'm loosing the water for one of them

thanks

 

https://m.summitracing.com/parts/slp-381-8085

 

while u are in there , do yourself a favor and replace the rear cam seal , and the rear main engine seal . not that u need to but it may save u form having to the pull the transmission again down the road

 

OK. Thanks for the reference. Good idea change the rear sales. Do you know the reference to buy them?. Sorry, but my English it's not good and it's dificult to me to look for the tech names and the sellers.
Then I will look for too, how to change these seals.
Thanks

 

https://m.summitracing.com/parts/fel-bs40625

 

that seal is not right its showing a rear main seal for a ford/merc

 

Is the application listing incorrect ?

 

There is another p/n not sure the differences.
https://m.summitracing.com/parts/fel-bs40464/applications?prefilter=1

 

the application listing shows correct , but unde rpart description it says ford/merc 144/170/200 ci L6
so who knows

 

For future reference those "caps" are called "Welch plugs" also commonly referred to a "frost plugs".

 

do you know another place to buy them? the pieces are cheap, but the delivery to Spain costs 58$ !! and I must pay also the custom cost there. Thanks

 

Try RockAuto.com

 

for exemple this ?
http://www.rockauto.com/es/moreinfo....251649&jsn=454

 

Looks like a freeze plug/ oil galley plug kit.

 

and this?

 

As long as they are listed for your vehicle you should be fine.