V6 Discussion and questions about the base carbureted or MPFI V6's and the rare SFI Turbo V6.

TPS disconnected, no more stall?

Thread Tools
 
Search this Thread
 
Old Dec 9, 2018 | 04:14 PM
  #1  
Firebird2011's Avatar
Thread Starter
Member
 
Joined: May 2016
Posts: 120
Likes: 1
From: Rome, Italy
Car: Pontiac Firebird Formula
Engine: 3.1 LH0
Transmission: 700R4
Axle/Gears: Automatic
TPS disconnected, no more stall?



Hi guys, may be my stalling problem was about the TPS? Whir warm engine, I disconnected the IAC first, no changes. When I disconnected and reconnected the TPS, the engine gradually got better, with no more stalling problem! I noticed the path of the alternator, IAC and TPS wiring harness: is that normal that the harness is so close to the thermostat hose? This should explain the stalling problem when hot? Any help is very appreciated!

Thanks!
Reply
Old Dec 25, 2018 | 10:53 PM
  #2  
zs&tas's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 917
Likes: 1
From: peterborough UK
Car: 88 T firebird
Engine: 2.8
Transmission: t5
Re: TPS disconnected, no more stall?

I'd have to check .It is all very tight around there though, that position shouldn't be causing any problems , all the wiring is designed to handle engine bay heat . Unless it's rubbed worn out and grounding .
Reply
Old Dec 25, 2018 | 10:55 PM
  #3  
zs&tas's Avatar
Senior Member
 
Joined: Jan 2008
Posts: 917
Likes: 1
From: peterborough UK
Car: 88 T firebird
Engine: 2.8
Transmission: t5
Re: TPS disconnected, no more stall?

I'd guess you just have some corrosion on the connection, that you cleaned when you disconnected and reconnected the plug , get some cleaner spray in there, carefully with a small file / knife clean it up , or push it on off a few times to clean it up .
Reply
Old Dec 26, 2018 | 12:04 PM
  #4  
maroe624's Avatar
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2014
Posts: 749
Likes: 39
From: Los Angeles
Car: 92 Z28 Clone
Engine: Vortec 350
Transmission: T-56
Axle/Gears: 3.23 Torsen
Re: TPS disconnected, no more stall?

I don't think tps would cause a stall. When I rebuilt my trans, freshened up my 3.1 and put everything back together I was stalling when coming to a stop. The grounds on the back of the heads were a bit loose. Might wanna check those if the new tps doesn't fix the issue.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dean_GTA
TPI
19
Oct 23, 2009 01:46 PM
Dean_GTA
Tech / General Engine
2
Apr 5, 2009 02:53 PM
SatisTraction
TPI
11
Oct 19, 2007 11:04 PM
voltran
Tech / General Engine
4
Dec 5, 2000 05:34 PM




All times are GMT -5. The time now is 08:31 PM.