2.8 MPI Camaro engine bolts
Thread Starter
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
2.8 MPI Camaro engine bolts
I recently purchased a 1986 Camaro SC with a 2.8 MPI engine. The problem is that the kid who had it had started to replace parts like the water pump and alternator and LOST THE BOLTS FOR THE PLENUM AND EVERYTHING ELSE ON TOP OF THE ENGINE.
i have been trying to locate a source to replace the bolts but I am not having any luck. Any help at this point would be greatly appreciated.
i have been trying to locate a source to replace the bolts but I am not having any luck. Any help at this point would be greatly appreciated.
Supreme Member
iTrader: (3)
Joined: Feb 2003
Posts: 2,470
Likes: 6
From: Waterford, MI
Car: 1998 Camaro Z28
Engine: 6.0L
Transmission: 4L60E
Axle/Gears: 3.73
Re: 2.8 MPI Camaro engine bolts
I don't know of a bolt kit to buy for these. You may want to check junk yards around, see if you can find any of the bolts you need off a car out there.
Joined: Mar 2006
Posts: 4,367
Likes: 15
Car: 1973 Datsun 240Z/ 1985 S-15 Jimmy
Engine: Turbo LX9/To be decided
Transmission: 5-speed/T-5
Axle/Gears: R200 3.90/7.5" 3.73
Re: 2.8 MPI Camaro engine bolts
Most can be replaced using hardware store (or bolt fastener store) sourced bolts.
Only a few that come to mind that you will likely need to hit up a wrecking yard for, and those are some of the water pump bolts, since they are usually longer than what is commonly available.
Only a few that come to mind that you will likely need to hit up a wrecking yard for, and those are some of the water pump bolts, since they are usually longer than what is commonly available.
Thread
Thread Starter
Forum
Replies
Last Post
Darkshot
Transmissions and Drivetrain
2
Aug 5, 2009 07:35 PM
scanman717
Tech / General Engine
1
May 10, 2004 01:45 PM