View Poll Results: Boze or Corvette
Boze HI Octane
15
68.18%
Corvette Style
7
31.82%
Voters: 22. You may not vote on this poll
Boze HI Octane Rims or Corvette style?
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Boze HI Octane Rims or Corvette style?
well i have been searching forever to find a rim that i wanted to put on my camaro and ive pretty much narrowed it down to two kinds. im leaning more towards the Boze HI Octane rims but as expensive as they are the'corvette(possibly replicas) are appealing as well. Looking at a 17' or 18' inch size...which ones do you think will look better? leaning towards a gunmetal but open for color suggestions as well.
edit: its a bad pic of car...but its the dark bright teal
edit: its a bad pic of car...but its the dark bright teal
Last edited by Pillsbry10; Jan 18, 2011 at 06:24 PM.
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
and corvette
Member
iTrader: (4)
Joined: Jan 2011
Posts: 235
Likes: 0
From: San Diego
Car: 1991 Camaro Z28
Engine: 5.7Liter HSR
Transmission: 700r4
Re: Boze HI Octane Rims or Corvette style?
well boze hi pro touring there are really expensive i have corvette c6 rims on mine i got bored of them and going to sell them but those boze are pretty sick
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
yeah they are a lot, but i only plan to buy one pair of rims and why not get a really good pair. the diffrence between a 17inch and 18inch rims is almost 200 bucks too lol
have any pics of yours?
have any pics of yours?
Member
iTrader: (4)
Joined: Jan 2011
Posts: 235
Likes: 0
From: San Diego
Car: 1991 Camaro Z28
Engine: 5.7Liter HSR
Transmission: 700r4
Re: Boze HI Octane Rims or Corvette style?
yea i feel ya here are the picks on like 1000 miles on the tires lol i dont used this car alot 
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
i do like that style in the gunmetal color
yeah i dont drive mine much either...hopefully next year that will change once its painted and tuned
yeah i dont drive mine much either...hopefully next year that will change once its painted and tuned
Trending Topics
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
all ive ever had was aluminum rims...and i honestly think chrome or polished will be to flashy for me(and the car) i do like a polished lip though on a colored rim
Member
iTrader: (4)
Joined: Jan 2011
Posts: 235
Likes: 0
From: San Diego
Car: 1991 Camaro Z28
Engine: 5.7Liter HSR
Transmission: 700r4
Re: Boze HI Octane Rims or Corvette style?
i can agree with that, im going hre wheels on mine this year with 4 inch lip on the back fully polish
Re: Boze HI Octane Rims or Corvette style?
Everyone and their mom has 'Vette wheels; to me it just doesn't seem right, to be using a wheel off a higher-end car...it kind of screams "poser" to me, but I don't know.
'Vette wheels just don't look right to me usually, flat-faced wheels are pretty ugly IMO in general, though there are exceptions.
The other issue is that spacers are a pretty huge turn-off to me; I like my wheels to bolt on right to the hub, with proper fit without any other stuff in between.
That said, billets don't look good at all in anything under 18" IMO. 17" billets look off somehow.
I'd go with the Boze.
'Vette wheels just don't look right to me usually, flat-faced wheels are pretty ugly IMO in general, though there are exceptions.
The other issue is that spacers are a pretty huge turn-off to me; I like my wheels to bolt on right to the hub, with proper fit without any other stuff in between.
That said, billets don't look good at all in anything under 18" IMO. 17" billets look off somehow.
I'd go with the Boze.
Member
iTrader: (4)
Joined: Jan 2011
Posts: 235
Likes: 0
From: San Diego
Car: 1991 Camaro Z28
Engine: 5.7Liter HSR
Transmission: 700r4
Re: Boze HI Octane Rims or Corvette style?
Everyone and their mom has 'Vette wheels; to me it just doesn't seem right, to be using a wheel off a higher-end car...it kind of screams "poser" to me, but I don't know.
'Vette wheels just don't look right to me usually, flat-faced wheels are pretty ugly IMO in general, though there are exceptions.
The other issue is that spacers are a pretty huge turn-off to me; I like my wheels to bolt on right to the hub, with proper fit without any other stuff in between.
That said, billets don't look good at all in anything under 18" IMO. 17" billets look off somehow.
I'd go with the Boze.
'Vette wheels just don't look right to me usually, flat-faced wheels are pretty ugly IMO in general, though there are exceptions.
The other issue is that spacers are a pretty huge turn-off to me; I like my wheels to bolt on right to the hub, with proper fit without any other stuff in between.
That said, billets don't look good at all in anything under 18" IMO. 17" billets look off somehow.
I'd go with the Boze.
Senior Member
Joined: Jan 2006
Posts: 793
Likes: 0
From: Michigan
Car: 1987 Trans Am
Engine: 5.0L TPI
Transmission: 700R4
Axle/Gears: Richmond 3.73
Re: Boze HI Octane Rims or Corvette style?
I agree with Puma!
I hate a flat faced rim like a vette rim or a 4th / 5th gen rim on a 3rd gen.
To flat faced, not enough dish or offset.
I like a rim with a dish to it.
I like the vette rims...only on a vette or a 4th gen.
I hate a flat faced rim like a vette rim or a 4th / 5th gen rim on a 3rd gen.
To flat faced, not enough dish or offset.
I like a rim with a dish to it.
I like the vette rims...only on a vette or a 4th gen.
Senior Member
iTrader: (3)
Joined: Aug 2007
Posts: 744
Likes: 1
From: sf bayarea
Car: 91 z28
Engine: 350/ported accel tpi/AFR 195
Transmission: t-5 =(
Axle/Gears: 345
Re: Boze HI Octane Rims or Corvette style?
Everyone has opinions on what wheels works for them. doesnt mean they are a " poser" but that is your oppion that works for you
It must me the poser in me haha but I personally like the z06 in 18" and polished not chrome and with out rivits. Im not a fan of the motorsports. But Look at tpi terror's car. But I like those boze as well. they are quite a bit more in price arent they?
Last edited by dspencer24; Jan 19, 2011 at 01:24 PM.
Senior Member
iTrader: (3)
Joined: Aug 2007
Posts: 744
Likes: 1
From: sf bayarea
Car: 91 z28
Engine: 350/ported accel tpi/AFR 195
Transmission: t-5 =(
Axle/Gears: 345
Re: Boze HI Octane Rims or Corvette style?
In my oppioin these look better then on a lowered 3rd gen then any vette I have seen
Senior Member
iTrader: (3)
Joined: Aug 2007
Posts: 744
Likes: 1
From: sf bayarea
Car: 91 z28
Engine: 350/ported accel tpi/AFR 195
Transmission: t-5 =(
Axle/Gears: 345
Re: Boze HI Octane Rims or Corvette style?
yes i agree with you alil bigger lip would be nice but they look good to me
i was looking at these havent seen any yet on a thirdgen I dont think. and they come in lots of different sizes and back spacing. with some nice brakes might look real nice
http://www.jdwheels.com/images/A%20E...225%2018x8.JPG
i was looking at these havent seen any yet on a thirdgen I dont think. and they come in lots of different sizes and back spacing. with some nice brakes might look real nice
http://www.jdwheels.com/images/A%20E...225%2018x8.JPG
Last edited by dspencer24; Jan 19, 2011 at 01:35 PM.
Member
iTrader: (4)
Joined: Jan 2011
Posts: 235
Likes: 0
From: San Diego
Car: 1991 Camaro Z28
Engine: 5.7Liter HSR
Transmission: 700r4
Re: Boze HI Octane Rims or Corvette style?
Haha this is a funny comment as I looked at your wheels. Jk man
Everyone has opinions on what wheels works for them. doesnt mean they are a " poser" but that is your oppion that works for you
It must me the poser in me haha but I personally like the z06 in 18" and polished not chrome and with out rivits. Im not a fan of the motorsports. But Look at tpi terror's car. But I like those boze as well. they are quite a bit more in price arent they?
Everyone has opinions on what wheels works for them. doesnt mean they are a " poser" but that is your oppion that works for you
It must me the poser in me haha but I personally like the z06 in 18" and polished not chrome and with out rivits. Im not a fan of the motorsports. But Look at tpi terror's car. But I like those boze as well. they are quite a bit more in price arent they?
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
1000 to 1500 for a vette style with rubber
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
i do really like the vette style that is on the blue camaro...i even thought about those in chrome(or polished) thats what got me looking at vette wheels in the first place
heres another question what backspacing and width should i go with on the boze...i eventually will upgrade the front brakes.
heres another question what backspacing and width should i go with on the boze...i eventually will upgrade the front brakes.
Joined: Sep 1999
Posts: 1,405
Likes: 8
From: Grand Rapids, MI
Car: 1985 IROC-Z
Engine: Magnacharged LS1
Transmission: T56
Axle/Gears: Ford 9" 4:11's
Re: Boze HI Octane Rims or Corvette style?
This is a no brainer...The Boze rims will set your car apart from the crowd. I'd look around in the 2 piece billet market some more if your willing to spend the cash. There are some better looking rims then the ones you chose from Boze.
Senior Member
iTrader: (3)
Joined: Aug 2007
Posts: 744
Likes: 1
From: sf bayarea
Car: 91 z28
Engine: 350/ported accel tpi/AFR 195
Transmission: t-5 =(
Axle/Gears: 345
Re: Boze HI Octane Rims or Corvette style?
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
i kind of fell in love with the boze rims when i saw them on sinister z's car....ever since then ive been trying to convince myself its worth the money.
what rims are those on your car?
Re: Boze HI Octane Rims or Corvette style?
dont need to talk alot of trash every one has there opinion and style i dont like alot of setups here and i dont talking smack to them about there stuff so if i drop and ls3 or ls1 motor on my car im a poser because its corvette engine or if i drop corvette brakes im a poser because its corvette lol its funny personally i don't like original cars because even there grandma can drive them no personal style whatsoever wheres the creativity on a stock car old and boring enough said
The OP asked for people's opinions on which wheels to get, I gave my opinion.
Just because I think it looks poser-ish doesn't mean you have to care what I think.
Personally I'd feel a bit stupid pulling up next to a 'Vette at a stoplight, with the same wheels he has. You may not care though.
Whatever floats your boat.
I'm not saying some of them don't look good/alright, I just don't care for flat faces wheels or putting factory wheels from a higher car on mine. I wouldn't put Cobra wheels on a Mustang GT either.
If you like it, that's fine. Do as you wish. I just gave my opinion on 'Vette wheels, as the OP solicited it.
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: Boze HI Octane Rims or Corvette style?
I'd start with straight polished (for any choice), finish (car) paint and then, decide from there for painting wheels. easier to add paint to wheels than remove.
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
hmm....thats not a horrible idea really
Supreme Member
iTrader: (7)
Joined: Jul 2000
Posts: 2,047
Likes: 2
From: Prince George, BC, Canada
Car: 89 GTA
Engine: 5.7L Supercharged
Transmission: T-56
Axle/Gears: Moser 9" 3.70
Re: Boze HI Octane Rims or Corvette style?
The ones on the blue car are probably the best looking vette wheels you can get for a camaro IMO. The Boze ones are amazing to just you have to think about what your using the car for and how the wheels will be treated, let's face it they are not cheap and a scratch in those would make me want to cry.
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Boze HI Octane Rims or Corvette style?
Boze is you have the $$ to buy them.
Amazing looking rim...and...not everyone will have them.
Amazing looking rim...and...not everyone will have them.
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Re: Boze HI Octane Rims or Corvette style?
I went with the Boze Octanes but without the rivets because they are a really nice rim and they are different from your regular Corvette ZR1's that everyone has these days, kinda like the Torque thrust II's...I had those on my car but I spent the extra cash and got the ones you see now, They were $2600.00 + tires which came to $4000.00 and if you are planning on putting a big break system on there get the spokes contured or shaved on the inside...they will ask you when you order them!
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
(gonna take a lot more tuning for that though)The ones on the blue car are probably the best looking vette wheels you can get for a camaro IMO. The Boze ones are amazing to just you have to think about what your using the car for and how the wheels will be treated, let's face it they are not cheap and a scratch in those would make me want to cry.
I went with the Boze Octanes but without the rivets because they are a really nice rim and they are different from your regular Corvette ZR1's that everyone has these days, kinda like the Torque thrust II's...I had those on my car but I spent the extra cash and got the ones you see now, They were $2600.00 + tires which came to $4000.00 and if you are planning on putting a big break system on there get the spokes contured or shaved on the inside...they will ask you when you order them!
ill probably get a set with the rivets if i do. the smooth ones do look better on your car though for sure. they def look better on your car than the tt's did. buying the rims themselves i think i can swing its just putting rubber on them that gets me concerned. granted the tires will last forever as the car isnt a dd or even close to it.what kind of tires did you get? that seems like a lot for a set of tires, even 18's...thats part of why i was thinking about going 17's as the rubber is cheaper
are you pretty happy with them so far? im assuming the quality and everything is pretty good for the price?
Last edited by Pillsbry10; Jan 23, 2011 at 11:14 AM.
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Re: Boze HI Octane Rims or Corvette style?
well i have been searching forever to find a rim that i wanted to put on my camaro and ive pretty much narrowed it down to two kinds. im leaning more towards the Boze HI Octane rims but as expensive as they are the'corvette(possibly replicas) are appealing as well. Looking at a 17' or 18' inch size...which ones do you think will look better? leaning towards a gunmetal but open for color suggestions as well.
http://viprims.com/WheelDetail2.asp?Link=2923
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
I like the spokes on that but the center section is where it loses me
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Re: Boze HI Octane Rims or Corvette style?
funny part about that qoute is some of them might think that then try to speed off, then realize im still there (gonna take a lot more tuning for that though)
i agree i do like those rims a lot but i feel like a shiny rim on my car might be a bit much...still undecided on color though...yes i would cry if i scratched them lol but thats the risk you take with any nice paint, rims, or car in general. my car isnt a daily driver by anymeans nor will it ever be that again. it for the first time in its life has a garage to sleep in and it seems to be pretty happy in there lol even with no heat or ac yet
took you long enough to find this thread ill probably get a set with the rivets if i do. the smooth ones do look better on your car though for sure. they def look better on your car than the tt's did. buying the rims themselves i think i can swing its just putting rubber on them that gets me concerned. granted the tires will last forever as the car isnt a dd or even close to it.
what kind of tires did you get? that seems like a lot for a set of tires, even 18's...thats part of why i was thinking about going 17's as the rubber is cheaper
are you pretty happy with them so far? im assuming the quality and everything is pretty good for the price?
(gonna take a lot more tuning for that though)i agree i do like those rims a lot but i feel like a shiny rim on my car might be a bit much...still undecided on color though...yes i would cry if i scratched them lol but thats the risk you take with any nice paint, rims, or car in general. my car isnt a daily driver by anymeans nor will it ever be that again. it for the first time in its life has a garage to sleep in and it seems to be pretty happy in there lol even with no heat or ac yet
took you long enough to find this thread
ill probably get a set with the rivets if i do. the smooth ones do look better on your car though for sure. they def look better on your car than the tt's did. buying the rims themselves i think i can swing its just putting rubber on them that gets me concerned. granted the tires will last forever as the car isnt a dd or even close to it.what kind of tires did you get? that seems like a lot for a set of tires, even 18's...thats part of why i was thinking about going 17's as the rubber is cheaper
are you pretty happy with them so far? im assuming the quality and everything is pretty good for the price?
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
ok so if i go with 18s, what size tires should i run on them?
same for the 17's
i think i want to run the same size all the way around for rotating purposes
same for the 17's
i think i want to run the same size all the way around for rotating purposes
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Re: Boze HI Octane Rims or Corvette style?
If you go with 18X8 & 18X10 rims then you could go with a 245/35/18 or 245/40/18 up front and up to a 285/35/18 on the rear, as for the backspacing on the rear mine is a 6 1/4" but you will need to take out the rear seat belts and massage the inner fender.
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
whats the biggest 18inch tire i can run all the way around front and rear so that i can rotate them? without having to massage anything
also my car is lowered a good amount
also my car is lowered a good amount
Last edited by Pillsbry10; Jan 24, 2011 at 09:06 PM.
Senior Member
Joined: Jul 2003
Posts: 568
Likes: 2
From: Toronto, On.
Car: 1985 IROC-Z / Z-28
Engine: 383 C.I. Stroked 6.3 Litre
Transmission: 700R-4
Axle/Gears: 3:73 Posi
Re: Boze HI Octane Rims or Corvette style?
The only way that if you want to ba able to rotate the tires is by have the 18X8's all the way around, if that's what you want, now if you have an 18X10 rims on the back the tire will bee too big for the front and the 18X8 tire will be too small for the back!
Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
well yeah i realize that i thought about going just 18x8s all the around as well...i dunno im just playing out all my options really
i thought about going just 18x8s all the around as well...i dunno im just playing out all my options really Thread Starter
Supreme Member
iTrader: (1)
Joined: May 2003
Posts: 2,023
Likes: 3
From: Evansville, IN
Car: 1992 Camaro RS 25th Anniversary
Engine: 3.4L v6 with a t3/t4 Turbo
Transmission: T-5 Conversion
Axle/Gears: 3.23 SLP Limited Slip
Re: Boze HI Octane Rims or Corvette style?
Bump... Rivets or no rivets? Polished or gunmetal? On a teal car
Joined: Oct 2006
Posts: 3,041
Likes: 8
From: West of Toronto
Car: 89 IROC
Engine: 305 TPI / ZZ4 cam
Transmission: Stage 2 700R4, LS1 driveshaft
Axle/Gears: Strange 3.42 w/ Auburn
Supreme Member
iTrader: (7)
Joined: Jul 2000
Posts: 2,047
Likes: 2
From: Prince George, BC, Canada
Car: 89 GTA
Engine: 5.7L Supercharged
Transmission: T-56
Axle/Gears: Moser 9" 3.70
Re: Boze HI Octane Rims or Corvette style?
Think you be missing out if you went with the 8" all the way around, having a nice fat tire in the back looks really good. If you could fit it I would go with a 9" front and 10" out back though having the car lowered might make it harder.
Thread
Thread Starter
Forum
Replies
Last Post
