ROH snyper help
Thread Starter
Senior Member
Joined: Feb 2011
Posts: 653
Likes: 5
From: Long Island, NY
Car: 87 Trans Am, 99 WS6, 16 Mustang GT
Engine: LB9, LS1
Transmission: 700R4, T56
Axle/Gears: 3.42 Posi, 4.10 Posi
ROH snyper help
So I found a set on craigslist for pretty cheap.
http://longisland.craigslist.org/ptd/4079761982.html
The ad says BMW/Firebird, but I'm positive the bolt pattern is not exactly the same for both manufacturers.
Also, are there diferent sets? If I look at them, should I measure for a specific offspace, backspace, etc?
http://longisland.craigslist.org/ptd/4079761982.html
The ad says BMW/Firebird, but I'm positive the bolt pattern is not exactly the same for both manufacturers.
Also, are there diferent sets? If I look at them, should I measure for a specific offspace, backspace, etc?
On Probation
Joined: Oct 2008
Posts: 6,319
Likes: 19
From: Northern Utah
Car: seeking '90.5-'92 'bird hardtop
Engine: several
Transmission: none
Axle/Gears: none
Re: ROH snyper help
BMW is 5 lug on a 120-mm lug circle, while we have 5 on 120.65-mm. Close enough, especially for those who trust swivel-nuts. We have a sticky about widths and offsets.
Joined: Apr 2004
Posts: 3,001
Likes: 62
From: Salt Lake City, Utah
Car: 1988 camaro "SS"/ 1991 305/T5
Engine: 383 LT1 in progress/LT1TBI 355 soon
Transmission: Probuilt 700R4 3600 stall/ T5
Axle/Gears: Moser axles, 3.42 Eaton Posi
Re: ROH snyper help
Son of a BITCH!!! I have the 16 inch GTAs to trade this guy if he were closer!!! I already have a set and would love another one. Get them,you'll love them
Thread Starter
Senior Member
Joined: Feb 2011
Posts: 653
Likes: 5
From: Long Island, NY
Car: 87 Trans Am, 99 WS6, 16 Mustang GT
Engine: LB9, LS1
Transmission: 700R4, T56
Axle/Gears: 3.42 Posi, 4.10 Posi
Re: ROH snyper help
Contacted him, he sold them, probably a couple days before.
Thread Starter
Senior Member
Joined: Feb 2011
Posts: 653
Likes: 5
From: Long Island, NY
Car: 87 Trans Am, 99 WS6, 16 Mustang GT
Engine: LB9, LS1
Transmission: 700R4, T56
Axle/Gears: 3.42 Posi, 4.10 Posi
Re: ROH snyper help
Found another set.
Can the stock acorn lugs be used to mount them? I know they used to make them third gen specific, there aren't different bolt patterns are there?
Also, will 17x9 rub in the front?
Can the stock acorn lugs be used to mount them? I know they used to make them third gen specific, there aren't different bolt patterns are there?
Also, will 17x9 rub in the front?
Thread
Thread Starter
Forum
Replies
Last Post
Bill Krumel
Auto Detailing and Appearance
18
Nov 8, 2001 04:00 PM
