Wheel help
Thread Starter
Junior Member
Joined: Apr 2007
Posts: 18
Likes: 0
From: california
Car: 1991 Z28 CONVERTIBLE
Engine: SUPERCHARGED 5.0
Transmission: AUTO
Wheel help
Hi , first of all i would like to say I don't understand wheel offsets and I have read about it a dozen times.
I have seen a set of wheels I like they are 18 in diameter. Now my issue is the offsets fronts are 8.5 in wide and +30 offset. The rears are 10.5 wide and +22 offset.
Will these wheels fit my 1991 z28 convertible ? Will I need spacers ?
stock rear end, possibly changing over to corvette brakes upfront. The wheels are ESR SR05.
I have seen a set of wheels I like they are 18 in diameter. Now my issue is the offsets fronts are 8.5 in wide and +30 offset. The rears are 10.5 wide and +22 offset.
Will these wheels fit my 1991 z28 convertible ? Will I need spacers ?
stock rear end, possibly changing over to corvette brakes upfront. The wheels are ESR SR05.
Supreme Member
Joined: Jul 1999
Posts: 2,755
Likes: 10
From: Ahead of you...
Car: 1984 LG4 Camaro
Engine: 350 Roller Motor
Transmission: Level 10 700R4
Axle/Gears: Strange 12 bolt 3.42
Re: Wheel help
There are others that have done this type of wheel fitment.
Do yourself a favor, go 10.5" all around - a few here have done it and they han help with specs on spacers and such. I'd raher have a 295 tire on all 4 corners than a 255/295 any day of the week...
Do yourself a favor, go 10.5" all around - a few here have done it and they han help with specs on spacers and such. I'd raher have a 295 tire on all 4 corners than a 255/295 any day of the week...
Thread
Thread Starter
Forum
Replies
Last Post
florida_gators
NW Indiana and South Chicago Suburb
24
Feb 27, 2021 09:03 PM
BOTTLEDZ28
Tech / General Engine
28
Mar 24, 2016 05:34 PM
NHL69
Exterior Parts for Sale
17
Mar 17, 2016 09:36 PM