Hey guys has anybody has 5 any luck fitting a set of 15x10 5.5" BS single beadlock street lite wheels with LS1 rear brakes?? If no dice on those I guess I could always go for the 17" version and be done with it. Thanks.

 

https://www.thirdgen.org/forums/whee...5x10-17x7.html

 

Nice so they will work. So I wonder since I've got stock 3rd gen width on my MWC 9" would a 5.5" backspace work just fine? Or maybe a 6" bs??

 

i believe most 3rd gen width rear's use a 5.5" backspace on a 15x10. you can double check fitment charts from Weld to be sure. I had to cut out the bumpstops and get fully adjustable rear control arms and panhard to get the rear axle centered to stop the rubbing with 275/60s

 

Awesome thanks for the info!! Cutting the bump stops is no problemo and I've got an on car adjustable panhard bar

 

Last I remember 5.5 puts the wheel even with the fender lip, if you want the wheels inside the fender you need 6.5BS on a 15x10

I run a 15x10 with 6.5BS and had to cut the bump stops out and trim/massage the front fender wheel wells, I also have a Moser 9" standard length, UMI non adjustable control arms and an adjustable pan hard bar and everything fits no problem.

 

Awesome! Thank you sir