Third Generation F-Body Message Boards
Somewhat close.
Somewhat close.
0 2023/10/28 19:23:03
New hose for the one side and already had a new center hose and the other caliper hose new.
New hose for the one side and already had a new center hose and the other caliper hose new.
0 2023/10/28 19:23:05
Mocking up the new lines and hoses against the old.
Mocking up the new lines and hoses against the old.
0 2023/10/28 19:23:06
Not real close.
Not real close.
0 2023/10/28 19:23:08
Center is fairly close.
Center is fairly close.
0 2023/10/28 19:23:09
Somewhat close.
Somewhat close.
0 2023/10/28 19:23:11
Start of the biggest tear in the lower spoiler top of the picture and a smaller one below.
Start of the biggest tear in the lower spoiler top of the picture and a smaller one below.
0 2023/10/29 23:14:42
Both welded up.
Both welded up.
0 2023/10/29 23:14:44
I used a coat hanger to keep it in form while the urethane hardened.
I used a coat hanger to keep it in form while the urethane hardened.
0 2023/10/29 23:14:46
After grinding the upper repair.
After grinding the upper repair.
0 2023/10/29 23:14:48
Grinding the smaller one.
Grinding the smaller one.
0 2023/10/29 23:14:50
This area had been rubbed through so I put metal tape behind it before building it back up.
This area had been rubbed through so I put metal tape behind it before building it back up.
0 2023/10/29 23:14:52
After grinding.
After grinding.
0 2023/10/29 23:14:54
After sanding with 80 grit.
After sanding with 80 grit.
0 2023/10/29 23:14:55
0 2023/10/29 23:14:57
Small tear on the other side.
Small tear on the other side.
0 2023/10/29 23:14:59
After welding.
After welding.
0 2023/10/29 23:15:01
After grinding and sanding with 80 grit.
After grinding and sanding with 80 grit.
0 2023/10/29 23:15:02
Tear on the other side.
Tear on the other side.
0 2023/10/29 23:23:11
After welding.
After welding.
0 2023/10/29 23:23:12
Ground and sanded with 80.
Ground and sanded with 80.
0 2023/10/29 23:23:14
This was a tear on the lower center where one of the lower deflector mounting hardware had been ripped out.
This was a tear on the lower center where one of the lower deflector mounting hardware had been ripped out.
0 2023/10/29 23:23:15
Another split but its hidden by the grill surround.
Another split but its hidden by the grill surround.
0 2023/10/29 23:23:17
Using metal tape as a backer due to the hole and size of the tear.
Using metal tape as a backer due to the hole and size of the tear.
0 2023/10/29 23:23:18
After grinding and sanding in 80.
After grinding and sanding in 80.
0 2023/10/29 23:23:20
Welded up so it doesnt expand.
Welded up so it doesnt expand.
0 2023/10/29 23:23:21
Set up to spray epoxy on the undersides.
Set up to spray epoxy on the undersides.
0 2023/10/29 23:23:23
Spotting in epoxy on some of the spots that had been sanded through on the door and quarter.
Spotting in epoxy on some of the spots that had been sanded through on the door and quarter.
0 2023/10/31 01:41:48
Considering how this panel started out I'm more than happy with it as it just needs a little putty now. I think its the worst panel I've ever repaired plus first time repairing a bumper cover.
Considering how this panel started out I'm more than happy with it as it just needs a little putty now. I think its the worst panel I've ever repaired plus first time repairing a bumper cover.
0 2023/10/31 01:41:51
Rear bumper cover with its first 2 coats of epoxy.
Rear bumper cover with its first 2 coats of epoxy.
0 2023/10/31 01:41:52
I've got some sanding dips from previous work but they will come out in further sanding and epoxy layers.
I've got some sanding dips from previous work but they will come out in further sanding and epoxy layers.
0 2023/10/31 01:41:53
Spotting in bare spots on the driver side.
Spotting in bare spots on the driver side.
0 2023/10/31 01:41:55
Driver rear bumper cover.
Driver rear bumper cover.
0 2023/10/31 01:41:57
You can see one of the big runs on the lower quarter, this was where I started spraying first.
You can see one of the big runs on the lower quarter, this was where I started spraying first.
0 2023/10/31 01:41:59
Another light coat on the bumper cover.
Another light coat on the bumper cover.
0 2023/10/31 01:42:00
A couple of coats on the underside areas that are visible that didnt get epoxy the first time.
A couple of coats on the underside areas that are visible that didnt get epoxy the first time.
0 2023/10/31 01:42:02
Cut and drilled a set of brackets to mount te Hella lights.
Cut and drilled a set of brackets to mount te Hella lights.
0 2023/11/04 19:54:19
Location with the new fabbed brackets, moved the lights out 1 inch.
Location with the new fabbed brackets, moved the lights out 1 inch.
0 2023/11/04 19:54:23
First location with the old mock up brackets.
First location with the old mock up brackets.
0 2023/11/04 19:54:25
Ready to set the bare bumper cover back on to check light location.
Ready to set the bare bumper cover back on to check light location.
0 2023/11/04 19:54:27