Third Generation F-Body Message Boards
Here it is welded in and coated with more weld thru primer
Here it is welded in and coated with more weld thru primer
0 2022/10/21 18:34:48
Here's the back side nasty part cut out
Here's the back side nasty part cut out
0 2022/10/21 18:41:53
patch panel in place, fitment wasn't ideal
patch panel in place, fitment wasn't ideal
0 2022/10/21 18:41:56
welded in, ugly sheet metal welds but there was a gap and they're getting ground down anyways
welded in, ugly sheet metal welds but there was a gap and they're getting ground down anyways
0 2022/10/21 18:41:58
the patch blended in
the patch blended in
0 2022/10/21 18:42:00
Here's the section nearly ready for paint
Here's the section nearly ready for paint
0 2022/10/21 19:06:32
more filler was needed than this but didn't grab a pic
more filler was needed than this but didn't grab a pic
0 2022/10/21 19:06:34
0 2022/10/21 19:06:35
Here it is freshly sprayed with epoxy primer, hoping to do base coat clear coat within the next week or two and then finally get the new gaskets in
Here it is freshly sprayed with epoxy primer, hoping to do base coat clear coat within the next week or two and then finally get the new gaskets in
0 2022/10/21 19:06:36
0 2022/11/19 14:53:07
0 2022/11/19 14:53:10
0 2022/11/19 14:53:12
0 2022/11/19 14:55:03
0 2022/11/25 17:19:04
0 2023/02/12 13:03:03
0 2023/07/06 15:41:16
0 2023/07/06 15:41:18
Here's a pic of the bottom mount. It's fastened to the fan housing with rivnuts, the two tapped holes align with holes that are already in the lower radiator support tray from the factory
Here's a pic of the bottom mount. It's fastened to the fan housing with rivnuts, the two tapped holes align with holes that are already in the lower radiator support tray from the factory
0 2023/07/11 16:26:41
the upper mount
the upper mount
0 2023/07/11 16:26:44
upper mount from the back, have to notch around the higher fan.
upper mount from the back, have to notch around the higher fan.
0 2023/07/11 16:26:46
0 2023/07/11 16:26:49
0 2023/07/11 16:26:51
0 2023/09/14 10:50:50
0 2023/09/14 10:51:01
0 2025/06/19 16:41:28