Third Generation F-Body Message Boards
Shot of the major work complete.
Shot of the major work complete.
0 2017/10/15 04:24:13
Same with DS.
Same with DS.
0 2017/10/15 04:22:58
PS tacked in place fitment checking.
PS tacked in place fitment checking.
0 2017/10/15 04:21:41
Tried using this HF 18" metal brake. Didn't work at all to bend 16 gauge steel. Returned it and fabricated the parts on my trusty bench vice.
Tried using this HF 18" metal brake. Didn't work at all to bend 16 gauge steel. Returned it and fabricated the parts on my trusty bench vice.
0 2017/10/15 04:18:58
0 2017/10/10 17:47:14
0 2017/10/09 04:35:21
0 2017/10/04 13:00:13
0 2017/10/04 13:00:07
Shot from below. You can see I already started to trim the core support. Center section is cut. Rust and horrible old brackets were welded there. Happy that cancer is gone. All the blue tape represents metal I am considering cutting. What do you guts think? Should be ok.
Shot from below. You can see I already started to trim the core support. Center section is cut. Rust and horrible old brackets were welded there. Happy that cancer is gone. All the blue tape represents metal I am considering cutting. What do you guts think? Should be ok.
0 2017/10/03 18:40:40
left side of core support vertical brace trimmed slightly. Needed more cleanse on the passenger side tube outlet. Looks ok now.
left side of core support vertical brace trimmed slightly. Needed more cleanse on the passenger side tube outlet. Looks ok now.
0 2017/10/03 18:39:09
Griffin LS swap 19 x 31 universal combo unit test fit.
Griffin LS swap 19 x 31 universal combo unit test fit.
0 2017/10/03 18:37:45
0 2015/10/27 18:10:42
First cut to get this thing started.
First cut to get this thing started.
0 2015/09/01 19:22:08
Front ps, I think about 90% done.
Front ps, I think about 90% done.
0 2015/09/01 19:22:01
ps about 90% done.
ps about 90% done.
0 2015/09/01 19:21:52
ps rear about 90% cut out.
ps rear about 90% cut out.
0 2015/09/01 19:21:43
First test fit of Wolfe minitub kit ps side piece.
First test fit of Wolfe minitub kit ps side piece.
0 2015/09/01 19:21:36
First test fit from above. I think I will need to go a bit wider.
First test fit from above. I think I will need to go a bit wider.
0 2015/09/01 19:21:29
Shot from above inside the car. I think I will have to go a bit wider still. Again about 90% done.
Shot from above inside the car. I think I will have to go a bit wider still. Again about 90% done.
0 2015/09/01 19:03:38
Wolfe minitub kit component test fit into place. No idea if this is mounted at the correct height.
Wolfe minitub kit component test fit into place. No idea if this is mounted at the correct height.
0 2015/09/01 19:03:31
Passenger side rear shot of wheel well.
Passenger side rear shot of wheel well.
0 2015/09/01 19:03:25
What the passenger side wheel well looks like. Again, about 90% complete cutting I think.
What the passenger side wheel well looks like. Again, about 90% complete cutting I think.
0 2015/09/01 19:03:19
I think this is about 90% done. Just clean up left.
I think this is about 90% done. Just clean up left.
0 2015/09/01 19:03:12
First cut, just sort of randomly placed.
First cut, just sort of randomly placed.
0 2015/09/01 19:03:03
0 2015/08/22 08:08:47
0 2015/08/22 08:08:43
0 2015/08/22 08:08:31