Third Generation F-Body Message Boards
Here is how far the sag moved. Only way to get the mounting point to line up was slice the sag. Lost some time filling the sag. Oh well.
Here is how far the sag moved. Only way to get the mounting point to line up was slice the sag. Lost some time filling the sag. Oh well.
0 2022/08/09 04:58:07
Of course still not perfect. Detail work.
Of course still not perfect. Detail work.
0 2022/08/09 04:56:13
Rundo knocked down
Rundo knocked down
0 2022/08/09 04:56:06
Made a mistake appying filler with the panel off the car, fleece sagged. Starting repair. Chunks of material are filler to repair sag...
Made a mistake appying filler with the panel off the car, fleece sagged. Starting repair. Chunks of material are filler to repair sag...
0 2022/08/09 04:56:01
Coated and setting up
Coated and setting up
0 2022/08/09 04:54:18
Bondo and resin mixed to create Rundo. Basically self leveling body filler.
Bondo and resin mixed to create Rundo. Basically self leveling body filler.
0 2022/08/09 04:54:13
0 2022/08/09 04:54:07
0 2022/08/09 04:51:21
0 2022/08/09 04:51:15
Part around tube was designed and printed so I had someplace to attach fleece.
Part around tube was designed and printed so I had someplace to attach fleece.
0 2022/08/09 04:51:10
After brushing on resin to basically turn the fleece into plastic, fiberglass pieces are cut to reinforce the entire unit.
After brushing on resin to basically turn the fleece into plastic, fiberglass pieces are cut to reinforce the entire unit.
0 2022/08/09 04:48:15
Oversized piece of fleece so it can cover the entire panel in 1 piece.
Oversized piece of fleece so it can cover the entire panel in 1 piece.
0 2022/08/09 04:48:10
DS fleece glued and stapled
DS fleece glued and stapled
0 2022/08/09 04:48:05
0 2022/08/09 04:45:50
Anchor for fleece for rear panels
Anchor for fleece for rear panels
0 2022/08/09 04:45:45
Framing up passenger side
Framing up passenger side
0 2022/08/09 04:45:38
0 2022/03/09 17:40:34
How stock rear plastic can no longer fit
How stock rear plastic can no longer fit
0 2022/03/09 17:40:29
Test fit console post primer
Test fit console post primer
0 2022/03/09 17:40:24
0 2022/03/09 17:38:17
2 coats
2 coats
0 2022/03/09 17:38:10
Enough parts to make it worth shooting high build to seal off the filler
Enough parts to make it worth shooting high build to seal off the filler
0 2022/03/09 17:38:05
0 2022/03/09 17:36:21
Touching up before high build primer
Touching up before high build primer
0 2022/03/09 17:36:16
0 2022/03/09 17:34:09
Valve block mounted
Valve block mounted
0 2022/03/09 17:34:04
Control box mounted
Control box mounted
0 2022/03/09 17:33:59
0 2022/03/09 17:31:11
Tack welded brackets in place
Tack welded brackets in place
0 2022/03/09 17:31:07
Where I want the air tank to live. Working alone means a lot of tape.
Where I want the air tank to live. Working alone means a lot of tape.
0 2022/03/09 17:31:02
Able to remove confirmed.
Able to remove confirmed.
0 2022/03/09 17:28:55
USB-C for screen. Allows screen to look inlayed but still able to pull out if needed.
USB-C for screen. Allows screen to look inlayed but still able to pull out if needed.
0 2022/03/09 17:28:50
After 3 or 4 applications of filler, finally getting close.
After 3 or 4 applications of filler, finally getting close.
0 2022/03/09 17:25:59
Fenching in screen bezel after resin impregnating the MDF.
Fenching in screen bezel after resin impregnating the MDF.
0 2022/03/09 17:25:55
Checking fitment
Checking fitment
0 2022/03/09 17:25:49
0 2022/03/09 17:22:28
In the car
In the car
0 2022/03/09 17:22:22
From the top
From the top
0 2022/03/09 17:22:17
0 2022/03/09 17:20:12
Underside of console, test fit wiring
Underside of console, test fit wiring
0 2022/03/09 17:20:07