Third Generation F-Body Message Boards
Control box mounted
Control box mounted
0 2022/03/09 17:33:59
Valve block mounted
Valve block mounted
0 2022/03/09 17:34:04
0 2022/03/09 17:34:09
Touching up before high build primer
Touching up before high build primer
0 2022/03/09 17:36:16
0 2022/03/09 17:36:21
Enough parts to make it worth shooting high build to seal off the filler
Enough parts to make it worth shooting high build to seal off the filler
0 2022/03/09 17:38:05
2 coats
2 coats
0 2022/03/09 17:38:10
0 2022/03/09 17:38:17
Test fit console post primer
Test fit console post primer
0 2022/03/09 17:40:24
How stock rear plastic can no longer fit
How stock rear plastic can no longer fit
0 2022/03/09 17:40:29
0 2022/03/09 17:40:34
Framing up passenger side
Framing up passenger side
0 2022/08/09 04:45:38
Anchor for fleece for rear panels
Anchor for fleece for rear panels
0 2022/08/09 04:45:45
0 2022/08/09 04:45:50
DS fleece glued and stapled
DS fleece glued and stapled
0 2022/08/09 04:48:05
Oversized piece of fleece so it can cover the entire panel in 1 piece.
Oversized piece of fleece so it can cover the entire panel in 1 piece.
0 2022/08/09 04:48:10
After brushing on resin to basically turn the fleece into plastic, fiberglass pieces are cut to reinforce the entire unit.
After brushing on resin to basically turn the fleece into plastic, fiberglass pieces are cut to reinforce the entire unit.
0 2022/08/09 04:48:15
Part around tube was designed and printed so I had someplace to attach fleece.
Part around tube was designed and printed so I had someplace to attach fleece.
0 2022/08/09 04:51:10
0 2022/08/09 04:51:15
0 2022/08/09 04:51:21
0 2022/08/09 04:54:07
Bondo and resin mixed to create Rundo. Basically self leveling body filler.
Bondo and resin mixed to create Rundo. Basically self leveling body filler.
0 2022/08/09 04:54:13
Coated and setting up
Coated and setting up
0 2022/08/09 04:54:18
Made a mistake appying filler with the panel off the car, fleece sagged. Starting repair. Chunks of material are filler to repair sag...
Made a mistake appying filler with the panel off the car, fleece sagged. Starting repair. Chunks of material are filler to repair sag...
0 2022/08/09 04:56:01
Rundo knocked down
Rundo knocked down
0 2022/08/09 04:56:06
Of course still not perfect. Detail work.
Of course still not perfect. Detail work.
0 2022/08/09 04:56:13
Here is how far the sag moved. Only way to get the mounting point to line up was slice the sag. Lost some time filling the sag. Oh well.
Here is how far the sag moved. Only way to get the mounting point to line up was slice the sag. Lost some time filling the sag. Oh well.
0 2022/08/09 04:58:07
Glazing putty to fill in small imperfections.
Glazing putty to fill in small imperfections.
0 2022/08/09 04:58:13
Kicker panel with fleece filler stapled to it.
Kicker panel with fleece filler stapled to it.
0 2022/08/09 04:58:18
No fiberglass here, just straight to fiberglass reinforced bondo to keep the stack up low.
No fiberglass here, just straight to fiberglass reinforced bondo to keep the stack up low.
0 2022/08/09 05:01:29
Finally got a vented battery mounted into the trunk. Summit universal mount.
Finally got a vented battery mounted into the trunk. Summit universal mount.
0 2022/08/09 05:01:35
Will be mounted below the AirRide 3 gallon air tank.
Will be mounted below the AirRide 3 gallon air tank.
0 2022/08/09 05:01:40
Starting PS
Starting PS
0 2022/12/14 05:30:16
DS looking sort of done (in primer)
DS looking sort of done (in primer)
0 2022/12/14 05:30:21
0 2022/12/14 05:30:26
Starting rear piece. Fleece time. Using stock top rail to mount upper section.
Starting rear piece. Fleece time. Using stock top rail to mount upper section.
0 2022/12/14 05:31:52
Trimmed and soaked in resin
Trimmed and soaked in resin
0 2022/12/14 05:31:56
0 2022/12/14 05:32:00
0 2022/12/14 05:34:00
Fiberglass time
Fiberglass time
0 2022/12/14 05:34:05