Third Generation F-Body Message Boards
0 2022/12/14 05:34:10
Rear most piece fiberglass done and started to mooth out with body filler
Rear most piece fiberglass done and started to mooth out with body filler
0 2023/01/19 09:54:41
Time to rebuild rear hatch pull down. Parts from Hawks.
Time to rebuild rear hatch pull down. Parts from Hawks.
0 2023/01/19 09:55:25
0 2023/01/19 09:56:09
First time seing all three pieces in.
First time seing all three pieces in.
0 2023/01/19 09:58:36
Sail panels didnt fit right. Adjustments made.
Sail panels didnt fit right. Adjustments made.
0 2023/01/19 09:58:42
0 2023/01/19 09:58:46
Rebuild done!
Rebuild done!
0 2023/01/19 13:43:57
Adjusting PS sail panel fitment
Adjusting PS sail panel fitment
0 2023/01/19 13:44:02
Smoothing PS with body filler
Smoothing PS with body filler
0 2023/01/19 13:44:07
Finaly ready for rundo. Fiberglass resin and body filler mixed together.
Finaly ready for rundo. Fiberglass resin and body filler mixed together.
0 2023/01/19 13:46:28
Wet rundo
Wet rundo
0 2023/01/19 13:46:34
Just about dry. Time to sand it all off... oooofff...
Just about dry. Time to sand it all off... oooofff...
0 2023/01/19 13:46:39
Rundo just about dry.
Rundo just about dry.
0 2023/01/19 13:49:06
1-part filler puddy filling in tiny dips that coupdnt be sanded out.
1-part filler puddy filling in tiny dips that coupdnt be sanded out.
0 2023/01/19 13:49:11
Ready for high build primer!
Ready for high build primer!
0 2023/01/19 13:49:16
Just about dry rundo
Just about dry rundo
0 2023/01/19 13:51:08
1-part puddy to fill in tiny low spots.
1-part puddy to fill in tiny low spots.
0 2023/01/19 13:51:13
Ready for high build primer!
Ready for high build primer!
0 2023/01/19 13:51:19
Custom door panels ordered from Hawks. Arm rests are Big Al's Caponents with opener and light. Nice billet pieces. Wood block will be upolstered with Corbeau seat material to match front seats and custom backs, as well as center arm rest.
Custom door panels ordered from Hawks. Arm rests are Big Al's Caponents with opener and light. Nice billet pieces. Wood block will be upolstered with Corbeau seat material to match front seats and custom backs, as well as center arm rest.
0 2023/02/14 11:52:07
0 2023/02/14 11:52:13
Hawks Satinless Works headers. 1-3/4" primaries and 2.5" collec
Hawks Satinless Works headers. 1-3/4" primaries and 2.5" collec
0 2023/03/12 13:01:06
0 2023/03/12 13:01:12
0 2023/03/12 13:01:18
First idea and it seems a bit over built, but for a gas tank, I like that idea.
First idea and it seems a bit over built, but for a gas tank, I like that idea.
0 2023/03/16 07:13:45
Use on ends of hardline for both feed and return
Use on ends of hardline for both feed and return
0 2023/03/24 07:35:21
0 2023/03/24 07:35:29
ACC carpet ordered thru Hawks. Added mass backing and loose insulation. Options added to make it feel more like OEM. Think it feels even better than stock.
ACC carpet ordered thru Hawks. Added mass backing and loose insulation. Options added to make it feel more like OEM. Think it feels even better than stock.
0 2023/04/01 17:49:49
Holley discontinued their stainless long tubes, so plan be was these Stainless Works units from Hawks. The welds look amazing.
Holley discontinued their stainless long tubes, so plan be was these Stainless Works units from Hawks. The welds look amazing.
0 2023/04/01 17:49:56
0 2023/04/01 17:50:02
Holley T56 double hump cross member.
Holley T56 double hump cross member.
0 2023/04/01 17:53:56
Holley 304 satinless duals
Holley 304 satinless duals
0 2023/04/01 17:54:02
During my inspection of the shipment.
During my inspection of the shipment.
0 2023/04/01 17:54:08
Finally getting around to adjusting the final interior panel. Glued fleece, resin already applied here. Then some short strand bondo. Followed by normal bondo.
Finally getting around to adjusting the final interior panel. Glued fleece, resin already applied here. Then some short strand bondo. Followed by normal bondo.
0 2023/04/01 17:56:34
Aeromotive 15 gallon 340 stealth fuel cell
Aeromotive 15 gallon 340 stealth fuel cell
0 2023/04/01 17:56:40
Confirming the Holley duals slip fit connection installs onto the Stainless Works long tubes.
Confirming the Holley duals slip fit connection installs onto the Stainless Works long tubes.
0 2023/04/01 17:56:45
Final rough in of all the rear custom panels. Far from perfect, but with zero experience and all home made, more than happy with the outcome.
Final rough in of all the rear custom panels. Far from perfect, but with zero experience and all home made, more than happy with the outcome.
0 2023/04/01 18:00:15
0 2023/04/01 18:00:20
0 2023/05/17 12:40:43
0 2023/05/17 12:41:09