Third Generation F-Body Message Boards
0 2021/01/26 14:00:31
0 2021/01/29 17:22:19
Ground Control strut housing and the old insert
Ground Control strut housing and the old insert
0 2021/02/06 02:33:19
Shock Dyno Plot of the KONI RACE Double ADJ 8611-1259
Shock Dyno Plot of the KONI RACE Double ADJ 8611-1259
0 2021/02/06 02:33:22
DIY 14mm (9/16in) tapered rod end spacer
DIY 14mm (9/16in) tapered rod end spacer
0 2021/02/06 02:34:40
200TW Yokahama A052 the new fastest cheater tire. Tire lifespan is hilariously bad, but putting 0.5 seconds on your opponent is critical.
200TW Yokahama A052 the new fastest cheater tire. Tire lifespan is hilariously bad, but putting 0.5 seconds on your opponent is critical.
0 2021/02/08 10:37:19
0 2021/02/08 14:59:24
0 2021/02/09 16:47:06
Old rattling Door handle
Old rattling Door handle
0 2021/02/13 02:49:55
0 2021/02/13 02:50:03
Billet aluminum with a textured powder coat finish
Billet aluminum with a textured powder coat finish
0 2021/02/13 02:50:08
Looks good and doesn't rattle like the stock handle does.
Looks good and doesn't rattle like the stock handle does.
0 2021/02/13 02:50:10
0 2021/02/13 02:50:12
10in spoiler
10in spoiler
0 2021/02/20 12:56:12
0 2021/02/20 12:56:18
0 2021/02/20 12:56:23
0 2021/02/20 12:56:29
0 2021/02/20 12:56:34
0 2021/02/20 12:56:39
Fully Torqued splitter rods. Custom lenght barrels I made myself.
Fully Torqued splitter rods. Custom lenght barrels I made myself.
0 2021/02/20 12:56:48
0 2021/03/09 12:27:26
0 2021/05/01 02:11:57
PENSKE 8300 Double adjustable with remote res
PENSKE 8300 Double adjustable with remote res
0 2021/05/01 03:04:57
upper Founders coilover mount
upper Founders coilover mount
0 2021/05/01 03:05:06
installed at full droop
installed at full droop
0 2021/05/01 03:05:16
custom 316 stainless rod end spacers machined by a friend
custom 316 stainless rod end spacers machined by a friend
0 2021/05/01 03:05:25
mount allows access to the compression sweep
mount allows access to the compression sweep
0 2021/05/01 03:05:33
maxed out on bump stops, still has travel left
maxed out on bump stops, still has travel left
0 2021/05/01 03:05:43
remote canister mounted to the pan-hard Support bar.
remote canister mounted to the pan-hard Support bar.
0 2021/05/01 03:05:52
routing the remote res lines away from the axle
routing the remote res lines away from the axle
0 2021/05/01 03:06:02
3d printed lower mount prototypes
3d printed lower mount prototypes
0 2021/05/01 03:06:12
the Founder's lower mount (right) didn't work, so i designed my own (right)
the Founder's lower mount (right) didn't work, so i designed my own (right)
0 2021/05/01 03:06:21
Shock bag t protect the coilover shaft and seals. 100% necessary as rocks and dirt will damage the seals
Shock bag t protect the coilover shaft and seals. 100% necessary as rocks and dirt will damage the seals
0 2021/05/01 03:08:14
re-routed PTFE stainless braided brake line
re-routed PTFE stainless braided brake line
0 2021/05/01 03:09:50
fits without hitting LCA or sway bar links
fits without hitting LCA or sway bar links
0 2021/05/01 03:10:00
new mount clears the PENSKE lower spring perech
new mount clears the PENSKE lower spring perech
0 2021/05/01 03:10:08
the Founder's lower mount is SO close to fitting, but PENSKE doesn't have a tapered perch for the smaller 2.25in springs.
the Founder's lower mount is SO close to fitting, but PENSKE doesn't have a tapered perch for the smaller 2.25in springs.
0 2021/05/01 03:10:17
Hit Jason up if you want a HIGH end Shock
Hit Jason up if you want a HIGH end Shock
0 2021/05/01 03:10:20
0 2021/05/17 20:00:10
After 88 runs, 1/2 being rains days. Worn down 2/32 so far
After 88 runs, 1/2 being rains days. Worn down 2/32 so far
0 2021/05/17 20:28:51