Third Generation F-Body Message Boards
1 2015/05/31 21:27:09
I was going to go black intake but I'm kind of digging the lt4 colors.
I was going to go black intake but I'm kind of digging the lt4 colors.
0 2018/04/29 22:08:36
All scratched up, dang it!
All scratched up, dang it!
0 2018/04/29 22:08:10
0 2018/03/24 00:33:34
0 2018/03/24 00:33:09
0 2018/03/17 20:34:23
Water pump on left and block sensor or right
Water pump on left and block sensor or right
0 2018/03/02 22:02:38
Pinky and index finger pointing to coolant in and out of the throttle body.
Pinky and index finger pointing to coolant in and out of the throttle body.
0 2018/03/02 22:02:19
Steam tube from back of.block
Steam tube from back of.block
0 2018/03/02 22:02:01
0 2018/02/27 21:07:45
0 2018/02/27 21:02:08
0 2016/12/03 08:46:25
Drivers side of LT1 with L98 mount installed. I have no idea if this is the left or right mount from the L98. I thought I didn't change it, but perhaps I did by accident. Can anyone tell me if this is the wrong side mount and therefore causes my motor to sit crooked.
Drivers side of LT1 with L98 mount installed. I have no idea if this is the left or right mount from the L98. I thought I didn't change it, but perhaps I did by accident. Can anyone tell me if this is the wrong side mount and therefore causes my motor to sit crooked.
0 2016/12/03 08:45:23
0 2016/07/31 00:18:03
0 2016/07/31 00:17:41
0 2016/05/28 22:32:08
0 2016/05/12 21:18:47
0 2016/04/20 16:05:58
0 2016/04/20 16:05:37
0 2016/04/20 16:05:12
0 2016/04/03 14:23:44
0 2016/04/03 14:13:57
0 2016/04/03 14:13:27
0 2016/04/03 14:07:12
0 2016/04/03 14:07:03
0 2016/04/03 14:02:45
0 2016/04/03 14:02:32
0 2016/04/03 14:02:22
0 2016/04/03 14:02:09
0 2016/04/03 13:16:04
I figured out how to post pictures again....its been a while. This is the before.
I figured out how to post pictures again....its been a while. This is the before.
0 2016/04/03 13:02:21
After
After
0 2016/04/03 13:01:02
My reverse lockout switch.
My reverse lockout switch.
0 2016/02/27 22:07:05
Here is the ECM in its new home.
Here is the ECM in its new home.
0 2016/02/27 22:06:41
I had to some wood blocking to the bracket to give it some strength when I screwed it to the bar inside the stock location.
I had to some wood blocking to the bracket to give it some strength when I screwed it to the bar inside the stock location.
0 2016/02/27 22:06:26
0 2015/12/16 22:57:07
exterior wise it looks like its coming along nicely
exterior wise it looks like its coming along nicely
0 2015/12/16 22:48:44
0 2015/12/16 22:48:04
0 2015/12/16 22:47:55
0 2015/12/16 22:44:52