Third Generation F-Body Message Boards
Splice installed in smaller hose then larger fits over top and is clamped
Splice installed in smaller hose then larger fits over top and is clamped
0 2015/07/17 19:25:17
87 rad on left 95 on right, only diff extra outlet on bottom left of 95 and coolant sensor on 95.
87 rad on left 95 on right, only diff extra outlet on bottom left of 95 and coolant sensor on 95.
0 2015/07/17 19:22:07
Flex hose with 1.25" reducer. Insert reducer into 1.5" hose and clamp down.
Flex hose with 1.25" reducer. Insert reducer into 1.5" hose and clamp down.
0 2015/07/17 18:48:02
1.5" universal flex rad hose from napa
1.5" universal flex rad hose from napa
0 2015/07/17 18:47:29
By pass hose for interior heater...for now. TBD if I will install lines or not.
By pass hose for interior heater...for now. TBD if I will install lines or not.
0 2015/07/17 18:46:56
Splice in action, I will look for a reducer for this in the future but it works for now.
Splice in action, I will look for a reducer for this in the future but it works for now.
0 2015/07/17 18:46:34
Splice so that clamp has something to pinch down on
Splice so that clamp has something to pinch down on
0 2015/07/17 18:46:13
87 rad and cover and left and 95 rad on right.
87 rad and cover and left and 95 rad on right.
0 2015/07/17 18:45:55
Lines installed, leak proof, but as I said I would have preferred a little shorter, but it's alright.
Lines installed, leak proof, but as I said I would have preferred a little shorter, but it's alright.
0 2015/07/17 15:37:25
Here is $230 CAD worth of fuel line materials. After exchange and shipping and duty it was pretty high but it worked flawless and looks good. Hopefully it's clear enough you can see part numbers to save yourself some searching.
Here is $230 CAD worth of fuel line materials. After exchange and shipping and duty it was pretty high but it worked flawless and looks good. Hopefully it's clear enough you can see part numbers to save yourself some searching.
0 2015/07/17 15:37:03
0 2015/07/17 14:06:34
Here is the caprice line after it was bent to shape.
Here is the caprice line after it was bent to shape.
0 2015/07/17 14:06:17
You can the difference between the caprice line and the camaro one.
You can the difference between the caprice line and the camaro one.
0 2015/07/17 14:05:54
Problem solved and now filter installs nice and tight, but not too right of course.
Problem solved and now filter installs nice and tight, but not too right of course.
0 2015/06/28 14:54:14
Here is adapter plate removed, notice how studs will prevent oil filter from being installed.
Here is adapter plate removed, notice how studs will prevent oil filter from being installed.
0 2015/06/28 14:54:04
On left is what you see when you change your oil filter, on the right is the adapter plate that hides behind the cooler.
On left is what you see when you change your oil filter, on the right is the adapter plate that hides behind the cooler.
0 2015/06/28 14:53:51
This is what it looks like with cooler and adapter removed, I took pic so I would remember orientation of adapter plate (in case it mattered), turned out its impression was pretty obvious the next day when I reinstalled.
This is what it looks like with cooler and adapter removed, I took pic so I would remember orientation of adapter plate (in case it mattered), turned out its impression was pretty obvious the next day when I reinstalled.
0 2015/06/28 14:53:34
0 2015/06/18 23:33:00
Sphon torque arm and T56 swap crossmember, bolted up great!
Sphon torque arm and T56 swap crossmember, bolted up great!
0 2015/06/14 14:13:25
When I converted my car to standard a few years back, I think I cut the hole a little large to the front, the dust booth doesn't quite cover the whole by about 1 inch, I will have to figure something out for this later.
When I converted my car to standard a few years back, I think I cut the hole a little large to the front, the dust booth doesn't quite cover the whole by about 1 inch, I will have to figure something out for this later.
0 2015/06/14 14:09:24
LT1 all bolted in, perfect fit!
LT1 all bolted in, perfect fit!
0 2015/06/14 14:08:56
My Franken harness!
My Franken harness!
0 2015/06/14 14:08:11
0 2015/05/31 21:41:04
0 2015/05/31 21:40:14
0 2015/05/31 21:39:08
0 2015/05/31 21:38:46
0 2015/05/31 21:38:22
0 2015/05/31 21:34:06
0 2015/05/31 21:33:43
0 2015/05/31 21:32:25
0 2015/05/31 21:31:29
0 2015/05/31 21:30:15
0 2015/05/31 21:27:36
0 2015/05/31 21:27:21
the LT1/T56 is free!
the LT1/T56 is free!
0 2015/04/12 23:49:05
But first a proper send off for 95 as I highly doubt it will ever see the road again under its own power.
But first a proper send off for 95 as I highly doubt it will ever see the road again under its own power.
0 2015/04/12 23:48:08
My Sphon parts to help me hook up.
My Sphon parts to help me hook up.
0 2015/04/12 23:27:40
Motor swap LT1 for L98
Motor swap LT1 for L98
0 2015/04/12 23:24:25
The IROC and the Z28
The IROC and the Z28
0 2015/04/12 23:23:18