Third Generation F-Body Message Boards
0 2026/05/17 12:36:58
0 2026/05/17 12:36:31
0 2026/05/15 19:06:43
0 2026/05/15 19:06:41
0 2026/05/15 19:06:40
0 2026/05/15 19:06:38
0 2026/05/15 19:06:37
0 2026/05/15 19:06:35
0 2026/05/15 18:59:50
0 2026/05/15 18:59:47
0 2026/05/15 18:59:46
0 2026/05/15 18:59:44
0 2026/05/15 18:59:42
0 2026/05/15 18:59:40
0 2026/05/15 18:59:38
Offset arm mounted, Pro 5.0 handle doesn't quite fit!
Offset arm mounted, Pro 5.0 handle doesn't quite fit!
0 2026/05/04 13:44:32
0 2026/05/04 13:42:45
Tried to get a view of the holes on the old shift handle vs the Pro 5.0; not much smaller, but small enough to need drilling. Bottom hole was drilled out one size up, top hole was 2 sizes up to account for the angle of the mounting face.
Tried to get a view of the holes on the old shift handle vs the Pro 5.0; not much smaller, but small enough to need drilling. Bottom hole was drilled out one size up, top hole was 2 sizes up to account for the angle of the mounting face.
0 2026/05/04 13:42:43
Another view. You can see the two holes for adjusting the spring bias, though it comes set to "full aggressive" right out of the box
Another view. You can see the two holes for adjusting the spring bias, though it comes set to "full aggressive" right out of the box
0 2026/05/04 13:42:41
New shifter in! It was easy to install since it uses recessed allen head bolts, though they don't give you a wrench. Had to dig out the trusty ziploc full of allen keys
New shifter in! It was easy to install since it uses recessed allen head bolts, though they don't give you a wrench. Had to dig out the trusty ziploc full of allen keys
0 2026/05/04 13:42:39
Here's the trans lowered about an inch, gave me room to spare removing the front 2 shifter bolts
Here's the trans lowered about an inch, gave me room to spare removing the front 2 shifter bolts
0 2026/05/04 13:42:36
Finally free of the garage, under her own power!!
Finally free of the garage, under her own power!!
0 2026/04/30 15:42:15
Last look under the car before she gets lowered
Last look under the car before she gets lowered
0 2026/04/30 15:42:09
My auto console plate was already cracked, so I got a little bit of switch mounting for now!
My auto console plate was already cracked, so I got a little bit of switch mounting for now!
0 2026/04/30 15:42:07
Had to cut the neck off of the 4thgen 5 speed boot for the arm to fit. Bit of a hole, but better than nothing!
Had to cut the neck off of the 4thgen 5 speed boot for the arm to fit. Bit of a hole, but better than nothing!
0 2026/04/30 15:41:58
Used some self-tappers to attach the boot as well, which I'm not stoked about, but it'll do since I couldn't find a factory lower boot plate.
Used some self-tappers to attach the boot as well, which I'm not stoked about, but it'll do since I couldn't find a factory lower boot plate.
0 2026/04/30 15:41:56
Leaves something to be desired with ground clearance, but better than nothing! I'll probably have to get her to a shop for a proper exhaust eventually, but this works for now
Leaves something to be desired with ground clearance, but better than nothing! I'll probably have to get her to a shop for a proper exhaust eventually, but this works for now
0 2026/04/30 15:39:29
The parameters I changed for my tune! Pretty simple once you figure out the pulse divider!
The parameters I changed for my tune! Pretty simple once you figure out the pulse divider!
0 2026/04/30 15:09:13
ROAD SPEED CONSTANT! We'll talk about IP Divider in a second....
ROAD SPEED CONSTANT! We'll talk about IP Divider in a second....
0 2026/04/30 15:01:36
pedal pressed, switch released, circuit open, cruise shuts off
pedal pressed, switch released, circuit open, cruise shuts off
0 2026/04/30 14:46:21
Pedal not pressed, switch pushed in, circuit is complete, cruise will work
Pedal not pressed, switch pushed in, circuit is complete, cruise will work
0 2026/04/30 14:46:18
0 2026/04/30 14:44:45
These brown and gray wires are coming from the 4thgen cruise switch, which you'll probably want to mount prior to installing the pedals in the car (pretty tight with the fuse box)
These brown and gray wires are coming from the 4thgen cruise switch, which you'll probably want to mount prior to installing the pedals in the car (pretty tight with the fuse box)
0 2026/04/30 14:37:51
Cruise control switch is that one at the top, ignore the other wires I'm holding, didn't know what was what at this point
Cruise control switch is that one at the top, ignore the other wires I'm holding, didn't know what was what at this point
0 2026/04/30 14:35:04
Here's the set of 3 switches from the 4thgen brakes; we just want that middle one
Here's the set of 3 switches from the 4thgen brakes; we just want that middle one
0 2026/04/30 14:35:00
You can see the other end of the brown wire right next to where the orange/ grey cross in this pic. BE SURE to leave enough length there for you to solder!
You can see the other end of the brown wire right next to where the orange/ grey cross in this pic. BE SURE to leave enough length there for you to solder!
0 2026/04/30 14:31:03
Here's the other end of the wires. At least I managed to use matching connectors on each wire!
Here's the other end of the wires. At least I managed to use matching connectors on each wire!
0 2026/04/30 14:24:48
take the new pigtail, and orient it so the plug faces down, and clip faces you. The wire on the RIGHT (with the yellow butt connector there) is your PURPLE wire (Yes, I realize I probably should have used those connectors on the yellow wire)
take the new pigtail, and orient it so the plug faces down, and clip faces you. The wire on the RIGHT (with the yellow butt connector there) is your PURPLE wire (Yes, I realize I probably should have used those connectors on the yellow wire)
0 2026/04/30 14:22:15
I zip tied the reverse light wires to the clutch lines and whatever hardline this is (pretty sure it's rear brakes)
I zip tied the reverse light wires to the clutch lines and whatever hardline this is (pretty sure it's rear brakes)
0 2026/04/30 14:17:43
You can hardly tell I cut the grommet, seals up nicely!
You can hardly tell I cut the grommet, seals up nicely!
0 2026/04/30 14:17:41