Third Generation F-Body Message Boards
sewing's done, time fer glue
sewing's done, time fer glue
0 2019/12/07 11:29:21
another tabletop 'stand'
another tabletop 'stand'
0 2019/12/07 11:28:52
dandy fit, just dandy!
dandy fit, just dandy!
0 2019/12/07 11:28:25
final fitting
final fitting
0 2019/12/07 11:28:07
Spain, eh?
Spain, eh?
0 2019/12/06 12:21:03
you don't want the seam sticking up over top of the rest of the dash
you don't want the seam sticking up over top of the rest of the dash
0 2019/12/06 09:53:31
After yer done, the whole werks should be level
After yer done, the whole werks should be level
0 2019/12/06 09:52:50
after sewing, the seam gets ripped (cut) to size
after sewing, the seam gets ripped (cut) to size
0 2019/12/06 09:52:14
this seam needs to fit the seam channel, the channel locks it in position and keeps it straight
this seam needs to fit the seam channel, the channel locks it in position and keeps it straight
0 2019/12/06 09:51:23
tight double stitching, three perfect lines
tight double stitching, three perfect lines
0 2019/12/03 16:49:53
excess gets trimmed
excess gets trimmed
0 2019/12/03 16:49:24
after first pass, the seam has to be flattened
after first pass, the seam has to be flattened
0 2019/12/03 16:48:46
constant test fitting
constant test fitting
0 2019/12/03 16:48:21
1LE on the right, BAER C4 13 inch knock off on the left
1LE on the right, BAER C4 13 inch knock off on the left
0 2019/12/03 10:05:54
1LE on the right, BAER 13" C4 knock off on the left
1LE on the right, BAER 13" C4 knock off on the left
0 2019/12/03 10:03:24
this is on a standard spindle cut to accept the caliper mount
this is on a standard spindle cut to accept the caliper mount
0 2019/12/03 10:00:01
stressing - er - sewing time
stressing - er - sewing time
0 2019/12/03 08:45:28
transfer marks from the dash to the patten to the material
transfer marks from the dash to the patten to the material
0 2019/12/03 08:44:51
pattern will be used again
pattern will be used again
0 2019/12/03 08:44:23
this is a beautiful hide, I coulda gone anywhere on it to cut
this is a beautiful hide, I coulda gone anywhere on it to cut
0 2019/12/03 08:43:33
closed cell foam is .125 inch thick
closed cell foam is .125 inch thick
0 2019/12/02 13:25:39
seam channel is essential
seam channel is essential
0 2019/12/02 13:25:19
foam laid down perfectly
foam laid down perfectly
0 2019/12/02 13:24:59
speaker openings were enlarged by one inch both sides
speaker openings were enlarged by one inch both sides
0 2019/12/02 13:24:18
closed cell foam is .125" thick
closed cell foam is .125" thick
0 2019/12/02 13:17:30
seam channel is essential as you will see later
seam channel is essential as you will see later
0 2019/12/02 13:17:01
foam laid down perfectly
foam laid down perfectly
0 2019/12/02 13:16:38
speaker openings enlarged by 1" each side
speaker openings enlarged by 1" each side
0 2019/12/02 13:16:04
speaker openings enlarged by 1" each side
speaker openings enlarged by 1" each side
0 2019/12/02 13:13:36
closed cell foam is .125" thick
closed cell foam is .125" thick
0 2019/12/02 13:11:07
seam channel is essential as you will see later
seam channel is essential as you will see later
0 2019/12/02 13:10:33
foam laid down perfectly
foam laid down perfectly
0 2019/12/02 13:10:14
speaker openings enlarged by 1" each side
speaker openings enlarged by 1" each side
0 2019/12/02 13:09:38
the closed cell foam is 1/8"
the closed cell foam is 1/8"
0 2019/12/02 13:04:28
as you will see later, this seam channel is essential
as you will see later, this seam channel is essential
0 2019/12/02 13:03:58
foam laid down perfectly
foam laid down perfectly
0 2019/12/02 13:03:19
Speaker opening were enlarged by 1" each side
Speaker opening were enlarged by 1" each side
0 2019/12/02 13:02:39
hard edge panel the shape of the pattern allows for clean edge cuts in foam
hard edge panel the shape of the pattern allows for clean edge cuts in foam
0 2019/11/28 16:36:21
this pattern can be used for an infinite number of panels
this pattern can be used for an infinite number of panels
0 2019/11/28 16:35:59
front edge pattern
front edge pattern
0 2019/11/28 16:35:29