Third Generation F-Body Message Boards
Because the pieces fit really tight, any adhesive that oozes onto the 'fill space' corners should be removes before it hardens
Because the pieces fit really tight, any adhesive that oozes onto the 'fill space' corners should be removes before it hardens
0 2019/07/21 18:59:30
a piece of pipe the correct dimeter and a heat gun make pieces that prevent deformation at the curves
a piece of pipe the correct dimeter and a heat gun make pieces that prevent deformation at the curves
0 2019/07/21 18:49:15
the stabilizing tabs are glued into position
the stabilizing tabs are glued into position
0 2019/07/21 18:48:01
very rigid and a perfect fit...
very rigid and a perfect fit...
0 2019/07/21 18:47:36
Cut a filler strip 5/8" wide....
Cut a filler strip 5/8" wide....
0 2019/07/21 18:44:10
Cut a filler strip 5/8" wide...
Cut a filler strip 5/8" wide...
0 2019/07/21 18:42:42
after the length adjustment
after the length adjustment
0 2019/07/21 17:06:19
0 2019/07/21 17:05:53
0 2019/07/21 17:04:32
there is a 5/8" opening that has to be filled
there is a 5/8" opening that has to be filled
0 2019/07/21 16:27:15
0 2019/07/21 16:27:06
After installing, you can measure the gap.
After installing, you can measure the gap.
0 2019/07/21 16:25:40
clean seperation
clean seperation
0 2019/07/20 20:18:35
0 2019/07/20 20:18:23
When working on darks, a good light makes a big difference.
When working on darks, a good light makes a big difference.
0 2019/07/20 20:16:04
a flexible straight edge makes for a good cut
a flexible straight edge makes for a good cut
0 2019/07/20 20:14:06
0 2019/07/20 20:13:55
0 2019/07/19 19:28:40
0 2019/07/19 19:24:20
0 2019/07/19 19:24:13
0 2019/07/19 19:24:06
0 2019/07/19 19:23:57
i love this stuff....
i love this stuff....
0 2019/07/19 19:19:52
2 part pu
2 part pu
0 2019/07/19 19:19:27
a 3/4" strip is cut to fill the gap inside the section cut
a 3/4" strip is cut to fill the gap inside the section cut
0 2019/07/19 18:58:10
cut it into strips, this stuff cuts easy, but it's also easy to go off course. be patient and take yer time....
cut it into strips, this stuff cuts easy, but it's also easy to go off course. be patient and take yer time....
0 2019/07/19 18:57:10
0 2019/07/19 18:56:52
0 2019/07/19 18:49:35
0 2019/07/19 18:49:27
0 2019/07/19 18:44:30
0 2019/07/19 13:00:35
0 2019/07/18 20:12:15
0 2019/07/18 20:03:43
0 2019/07/13 19:27:39
0 2019/07/13 19:27:30
0 2019/07/13 19:27:22
0 2019/07/13 19:27:13
0 2019/07/13 19:26:06
0 2019/07/13 19:25:58
0 2019/07/13 19:25:51