Third Generation F-Body Message Boards
0 2019/10/19 15:28:15
0 2019/10/18 10:45:44
0 2019/10/15 17:04:14
0 2019/10/13 17:55:38
0 2019/10/11 18:30:01
flush fit, ready for glue
flush fit, ready for glue
0 2019/08/30 17:06:16
what it's gonna look like
what it's gonna look like
0 2019/08/29 20:49:33
waht it used to look like
waht it used to look like
0 2019/08/29 20:48:54
cleaned up for finish coat
cleaned up for finish coat
0 2019/08/29 20:48:29
gotta replace the plastic
gotta replace the plastic
0 2019/08/29 20:46:35
Aluminum, fresh wj cut
Aluminum, fresh wj cut
0 2019/08/29 20:46:24
Very thin, light fg...
Very thin, light fg...
0 2019/08/29 18:44:19
0 2019/08/29 14:56:17
highlighted curves... now here's the 'ratio' that excites me....
highlighted curves... now here's the 'ratio' that excites me....
0 2019/08/29 12:54:14
0 2019/08/29 12:44:53
a beautiful woman with a very exciting 'ratio'
a beautiful woman with a very exciting 'ratio'
0 2019/08/29 08:28:10
very rigid, rear hoop and bracing tied into the front subframe and firewall
very rigid, rear hoop and bracing tied into the front subframe and firewall
0 2019/08/25 18:13:45
0 2019/08/25 18:12:28
0 2019/08/25 18:06:12
0 2019/08/25 17:37:23
the fit of a 335 30
the fit of a 335 30
0 2019/08/23 21:46:33
immaculate.....
immaculate.....
0 2019/08/23 18:08:56
a little glue....
a little glue....
0 2019/08/23 18:08:38
a little powder coat...
a little powder coat...
0 2019/08/23 18:08:11
now we're ready for upholstery
now we're ready for upholstery
0 2019/08/22 21:09:36
perfect fit
perfect fit
0 2019/08/22 21:09:19
10-24 cap screws will fix 'em
10-24 cap screws will fix 'em
0 2019/08/22 21:07:12
had to do something about these fracture prone studs
had to do something about these fracture prone studs
0 2019/08/22 21:06:25
the way it's gonna be (with grill cloth of course....)
the way it's gonna be (with grill cloth of course....)
0 2019/08/19 21:05:15
the way it used to be
the way it used to be
0 2019/08/19 21:04:56
header color...
header color...
0 2019/08/08 20:46:42
Not the VFN, but when I was doing the bodywork I considered integrating the headlight covers into the hood. The hood I used was open and had to be closed over, but I wanted to have the really stock look so did it the way it ended up. If I were doing it again though....
Not the VFN, but when I was doing the bodywork I considered integrating the headlight covers into the hood. The hood I used was open and had to be closed over, but I wanted to have the really stock look so did it the way it ended up. If I were doing it again though....
0 2019/08/07 11:13:57
even when i can't drive it, i gotta get it out and look at it...
even when i can't drive it, i gotta get it out and look at it...
0 2019/08/01 18:08:10
trial fit the dash after it's prepped, you can see how visible the filler piece is...
trial fit the dash after it's prepped, you can see how visible the filler piece is...
0 2019/07/31 18:23:19
this is a great opportunity to modify the parts so they extend right to the glass and cover the gaps
this is a great opportunity to modify the parts so they extend right to the glass and cover the gaps
0 2019/07/31 18:23:11
maybe not easy to see in this photo bc of the reflection, the point at which the a pillar meets the dash
maybe not easy to see in this photo bc of the reflection, the point at which the a pillar meets the dash
0 2019/07/31 18:23:03
0 2019/07/31 17:10:59
patterns have to be made for all the pieces that get sewn together otherwise it looks like a wrinkled mess.
patterns have to be made for all the pieces that get sewn together otherwise it looks like a wrinkled mess.
0 2019/07/31 17:09:52
oops, forgot the picture in the previous post....
oops, forgot the picture in the previous post....
0 2019/07/31 17:07:02
low and wide....
low and wide....
0 2019/07/30 17:57:31