Camaro "Demon Eyes" Headlight mod
Thread Starter
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Camaro "Demon Eyes" Headlight mod
I posted this in a reply to a headlight mod thread in the Body section - but thought it was even more an appearance mod.
This is a headlight mod I have thought about for some time. I think the newer BMW "Demon Eyes" lights (aka "halo" or "Angel Eyes") could be a really cool headlight mod for the Camaros.
I also believe that the previous 3-series bmw headlights are pretty close to the size of the light pockets on the Camaro. And although they (as far as I know) didn't come with the Demon Eyes lights, there are aftermarket ones out there to be found.
For those not knowing what the heck Im talking about - this is what the lights look like:

And here is a quick (yeah I know it isn't very good) photoshop of them on my IROC:

Any thoughts?

Ken
This is a headlight mod I have thought about for some time. I think the newer BMW "Demon Eyes" lights (aka "halo" or "Angel Eyes") could be a really cool headlight mod for the Camaros.
I also believe that the previous 3-series bmw headlights are pretty close to the size of the light pockets on the Camaro. And although they (as far as I know) didn't come with the Demon Eyes lights, there are aftermarket ones out there to be found.
For those not knowing what the heck Im talking about - this is what the lights look like:

And here is a quick (yeah I know it isn't very good) photoshop of them on my IROC:

Any thoughts?

Ken
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
I think it would look cool. I wouldnt mind doing that to my car, but there wouldnt be much point with my pop-up headlights :P. I think it would look best if you did like the first picture you attached and kinda have the tops of the circles 'cut off'. Kinda makes it look like eyelids, like its evil
Thread Starter
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
SuperchargedRS,
I do not know if they are all HIDs, but they are for sure available as HIDs.
Ward,
I agree that the "eyelid" look is better. Here is another crappy attempt on fixing that:

Better?

Ken
I do not know if they are all HIDs, but they are for sure available as HIDs.
Ward,
I agree that the "eyelid" look is better. Here is another crappy attempt on fixing that:

Better?

Ken
Trending Topics
Supreme Member
Joined: May 2002
Posts: 2,119
Likes: 0
From: Central NJ
Car: 86 Iroc-Z28
Engine: FB385
Transmission: 700r4
Thats a photoshop! They are off of a BMW and would require some modifications to a stock camaro, so about them firtting a firebird, i would have to say no. No where near the same size. I wish they made more aftermarket parts for our cars but it just does not look like its going to happen anytime soon!
Supreme Member

Joined: Jan 2001
Posts: 7,164
Likes: 1
From: Someone owes me 10,000 posts
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
I think it looks like crap. sorry. The circular pattern of it just doesn't match the curves of the car. I guess that's how I should describe it. Not too mention, having rectangular fog lights and turn signals,maybe I'm just being ****, but just doesn't look good IMO.
Originally posted by Mark A Shields
I think it looks like crap. sorry. The circular pattern of it just doesn't match the curves of the car. I guess that's how I should describe it. Not too mention, having rectangular fog lights and turn signals,maybe I'm just being ****, but just doesn't look good IMO.
I think it looks like crap. sorry. The circular pattern of it just doesn't match the curves of the car. I guess that's how I should describe it. Not too mention, having rectangular fog lights and turn signals,maybe I'm just being ****, but just doesn't look good IMO.
The circles kinda look out of place on the car.....
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
The asymmetrical nature of the lights somehow appeals to my aesthetic sense--shucks, I like'em (kinda like a woman whose individual facial features are awkward but who remains beautiful in spite of them). Umm, sorry, I think I've been up too long.
JamesC
JamesC
Supreme Member

Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
Those headlights look like the angel eyes HID lights found in the upper level BMW Moddels. By themselves, the lights look incredible and really light up the road without producing a lot of glare to oncomming traffic. I was thinking about having 300ZX style lights with those, but they are like $900.
They look mean in the Camaro, looks kind of strange because I never saw rounded lights in a thirdgen Camaro before. With such an excellent lighting system, who cares how they look, at least you will be able to the road like it was daytime at nighttime. If you do the mod, don't forget the ballestors.
They look mean in the Camaro, looks kind of strange because I never saw rounded lights in a thirdgen Camaro before. With such an excellent lighting system, who cares how they look, at least you will be able to the road like it was daytime at nighttime. If you do the mod, don't forget the ballestors.
Supreme Member
Joined: Oct 2001
Posts: 1,648
Likes: 0
From: Olean NY USA
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
I like them. I think it can be done tastefully. Here is the same kinda setup. This is the more projector style. I think it looks good and have considered for mine.
Thread Starter
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Originally posted by devianb
Those headlights look like the angel eyes HID lights found in the upper level BMW Moddels.
Those headlights look like the angel eyes HID lights found in the upper level BMW Moddels.

I most definitely see how this would be a love/hate type of mod, but I think it would be a cool mod to see done. And I kinda like the devilish look of it, even though the round lights break with the otherwise square design.

Ken
Originally posted by 86IROCNJ
Thats a photoshop! They are off of a BMW and would require some modifications to a stock camaro, so about them firtting a firebird, i would have to say no. No where near the same size. I wish they made more aftermarket parts for our cars but it just does not look like its going to happen anytime soon!
Thats a photoshop! They are off of a BMW and would require some modifications to a stock camaro, so about them firtting a firebird, i would have to say no. No where near the same size. I wish they made more aftermarket parts for our cars but it just does not look like its going to happen anytime soon!
Dont be so quick to say they are a photoshop... did you know you can buy them or make them at most any import shop?!?
here are links on how to do them if you dont beleive me my friend just did it for his old blazer bmw angel eyes,/ demon eyes here is another since you are so quick to assume its a photoshop..
Thread Starter
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Originally posted by 600_dollars
Dont be so quick to say they are a photoshop...
Dont be so quick to say they are a photoshop...

Ken
Supreme Member
Joined: May 2002
Posts: 2,119
Likes: 0
From: Central NJ
Car: 86 Iroc-Z28
Engine: FB385
Transmission: 700r4
Don't be so quick you were saying!!! Seriously though, i typed that for two reasons: 1: i replied to his other post also 2: he said it! Thanks for those sites though. When i am done wasting money on trying to go fast i'll try to waste money on new head lights since there is absolutely nothing wrong with my stock lights! lol
Supreme Member

Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
Originally posted by ChevyKen
Read the first post
I most definitely see how this would be a love/hate type of mod, but I think it would be a cool mod to see done. And I kinda like the devilish look of it, even though the round lights break with the otherwise square design.

Ken
Read the first post

I most definitely see how this would be a love/hate type of mod, but I think it would be a cool mod to see done. And I kinda like the devilish look of it, even though the round lights break with the otherwise square design.

Ken
Thread Starter
Joined: Jul 1999
Posts: 1,421
Likes: 24
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Originally posted by devianb
Sorrrrrrrrrry. I was about to leave when I read the post so I made a quick comment. Not all 3 series had them.
Sorrrrrrrrrry. I was about to leave when I read the post so I made a quick comment. Not all 3 series had them.

I know not all 3 series had them, in fact - Im not sure if ANY of the previous 3 series had them, but they are available aftermarket.
The reason Im thinking of the previous 3 series style as a possible donor car, is that the shape of the headlight assembly is pretty close to the headlight pockets of the Camaro.
A lot of the newer 5/7 series have these lights, but the shape of the headlight assembly would cause some major extra customizing problems compared to the previous 3 series..

Ken
Supreme Member

Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
If I had a Camaro, I would seriously consider it, a bit impossible to fit on a bird in the slim headlight pocket. Even the aftermarket lights are expensive, maybe someone has lights on Ebay on something.
Member
Joined: Nov 2002
Posts: 100
Likes: 0
From: Chatt-town, TN
Car: '91 Camaro RS
Engine: TBI 305... bah
Transmission: Slushbox 700r4
when i first saw the photochop of the demon eyes lights... it kinda threw me off. they didn't really seem to fit. i mean, the only round thing on a 3rd gen camaro should be wheels, right. but then i couldn't say that i didn't like them either. so i've been sitting here staring at the photochop pic and they're really growing on me... i think i kinda like 'em!
i was looking at another thread earlier today about projector headlights from c/k series trucks that would fit our cars, which is why this thread caught my eye, and now i'm kinda thinkin' that if we could find a way to make bmw lights work... i might go that way. or i could try like that website was suggesting and make my own red demon eyes for the c/k series lights, but either way... i think its worth trying! just my thoughts!
doc
i was looking at another thread earlier today about projector headlights from c/k series trucks that would fit our cars, which is why this thread caught my eye, and now i'm kinda thinkin' that if we could find a way to make bmw lights work... i might go that way. or i could try like that website was suggesting and make my own red demon eyes for the c/k series lights, but either way... i think its worth trying! just my thoughts!
doc
Supreme Member

Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
Originally posted by SpeedCat86
Dang, it makes me wish I didn't have pop-up headlights.
Dang, it makes me wish I didn't have pop-up headlights.
I would have tried to have a fixed healight design, but the light area is so slopped that only a few lights would work. The lights would have to be very thin. I want to get a Camaro just so I can so that conversion, among other things.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Hey, StockRoc,
Even the Tin Man's eyes were after market (and that Dorthy chick was a bit odd too, not to mention that freakin Wicked Witch of the East--after market implants, I think).
JamesC
Even the Tin Man's eyes were after market (and that Dorthy chick was a bit odd too, not to mention that freakin Wicked Witch of the East--after market implants, I think).
JamesC
Last edited by JamesC; Jan 19, 2003 at 08:20 PM.
Supreme Member

Joined: Jun 2002
Posts: 4,029
Likes: 6
From: Illinois
Car: 1988 Trans Am
Engine: 305 TPI
Originally posted by harry's91rs
Do you think it would be cool if they were rectangles and went around our stock lights? I might try and fabricate rectangular ones.
Do you think it would be cool if they were rectangles and went around our stock lights? I might try and fabricate rectangular ones.
I thought there was a post before about angel eyes for birds, somone showed a replacment light that had the angel eye feature already built into it, it was a square around the light though not a circle.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Hey, StockRoc,
Just givin you hell because I'm from Kansas too.
JamesC
Just givin you hell because I'm from Kansas too.
JamesC
Supreme Member
Joined: Nov 1999
Posts: 1,253
Likes: 1
From: Hawaii
Car: 1984 Chevy Camaro
Engine: Built L98
Transmission: T-56 6 speed
Originally posted by 85maroz28
I like them. I think it can be done tastefully. Here is the same kinda setup. This is the more projector style. I think it looks good and have considered for mine.
I like them. I think it can be done tastefully. Here is the same kinda setup. This is the more projector style. I think it looks good and have considered for mine.
I think if done right it could look sweet, but the circles just don't match the lines of our cars, maybe on a 4th gen it'd look better, then on our cars.
This is an example of it done right, Lexus IS300
This is an example of it done right, Lexus IS300
Supreme Member
Joined: Mar 2001
Posts: 2,262
Likes: 0
From: Renton, WA
Car: 1985 Camaro, 1986 Trans Am
Engine: 5.0L carbed and 5.0L TPI
Transmission: TH700R4
Axle/Gears: 3.23 and 3.27 posi
Originally posted by 85maroz28
I like them. I think it can be done tastefully. Here is the same kinda setup. This is the more projector style. I think it looks good and have considered for mine.
I like them. I think it can be done tastefully. Here is the same kinda setup. This is the more projector style. I think it looks good and have considered for mine.
Last edited by RSFreak; Apr 6, 2003 at 03:48 AM.
Supreme Member
Joined: May 2002
Posts: 2,119
Likes: 0
From: Central NJ
Car: 86 Iroc-Z28
Engine: FB385
Transmission: 700r4
A member by the name of revlimit had them i think. Did not get to see very good pictures of it but it was a white camaro if you ever come across it.
Supreme Member

Joined: Mar 2001
Posts: 5,144
Likes: 2
From: CC, TX
Car: 1999 Yamaha Banshee
Engine: 379cc twin cyl 2-stroke stroker
Transmission: 6 spd manual
Axle/Gears: 14/41 tooth
Originally posted by Mark A Shields
I think it looks like crap. sorry. The circular pattern of it just doesn't match the curves of the car. I guess that's how I should describe it. Not too mention, having rectangular fog lights and turn signals,maybe I'm just being ****, but just doesn't look good IMO.
I think it looks like crap. sorry. The circular pattern of it just doesn't match the curves of the car. I guess that's how I should describe it. Not too mention, having rectangular fog lights and turn signals,maybe I'm just being ****, but just doesn't look good IMO.
Supreme Member
Joined: May 2001
Posts: 2,228
Likes: 2
From: Your neighbor's hood, MD
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Originally posted by JimmyG-91Z
I think if done right it could look sweet, but the circles just don't match the lines of our cars, maybe on a 4th gen it'd look better, then on our cars.
This is an example of it done right, Lexus IS300
I think if done right it could look sweet, but the circles just don't match the lines of our cars, maybe on a 4th gen it'd look better, then on our cars.
This is an example of it done right, Lexus IS300
Yep, on that car it looks good, it's a rounded car with -round- headlamps. It looks fairly hideous on a third gen as they are so square.







I didn't even realize you were from Kansas too, cool man.