I am an hour west of Kansas City. I will start selling parts from this car if someone wants $500 worth to start it off. Or $1500 for the whole car. Needs some work but starts and drives. I drove it 50 miles home.

85 Z/28 rebuilt 305, turbo 350, T-tops don't leak, no rust on the car, even under the tops.

 

pic

 

how much for tpi to 90260

 

Interested in sending up the carrier to canada if its a 10 bolt posi unit?

 

If I part the car..... and if you are talking about the complete TPI unit less motor, Including all wiring, sensors, and parts to change a car over to TPI I would need $400 + shipping, probably around $50. It is a very clean unit with no dents in the runners. I have a complete gasket set I would send with it too. Remember this setup is for old style heads unless it is modified.

I will probably sell the rear end for $150 local pick up only....... sorry 84z28350

 

i'll keep you posted. but probably not gonna buy

thanks

 

where are you?

 

Topeka, Kansas

 

Shipping to Los Angeles will run about $700 or so, FYI...

 

do you still have this setup for sale i am i need of the tpi set up and i live in kansas about 2.5 hours away from you thanks

 

Hello heartbeat. I sold that car as a whole unit, but I have 2 TPI motors complete, and quite a few TPI parts for sale. let me know what you have in mind and I will see if I can help. One of the motors is the one in the 60K mile car that I drive, and you can hear it run and drive the car. Let me know.

 

I am looking for the metal fuel line that connects to the rear of the fuel rail and connects to the 9th injector on the earlier model TPI set-ups. If ya got one let me know how much to Augusta GA 30813. Thanks
Tony

 

do you have any pre 87 stuff

 

how much for ECU or Memcal to 47591, Indiana

 

OK, MY1986IROCZ, sorry I don't have that part by it self

heartbeat, I have an intake base for old style heads, and a really nice of Corvette runners to go with.

indirocz28, I don't have any ecu's, but I have several speed density (90.91,92) memcals (chips) that I had made up for my car. I am changing to a 350 Vette motor, and will start selling them now.

 

do you have some pics of the intake set up if so send them to blazintk@hotmail.com i will drive to get them how much
edit: actually how much do you want for the complete 60000 mile motor I would be very interested in that pm me a total and I might come and get it and help you pull it if you need help thanks

 

how much for the hood/louvers, passenger door trim, vents, and weatherstripin?

 

I need a MAF memcal - sorry..

 

Sorry I didn't get back yet heartbeat........... been reeeally busy.

To the other poster I have sold the car in the pic at the first of the post. Sorry.