18" Boyd Coddington JYD Wheels w/Tires
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
18" Boyd Coddington JYD Wheels w/Tires
Just seeing if there is any interest in the wheels. I found another set that I want(Bonspeed Palisade) . These are Boyd Coddington Junk Yard Dog Wheels 18x8 Front with 4.5BS and 18x9 Rear with 5.5 BS with Sumitomo HTRZ II 245/40/18 Tires in the front and 285/35/18 Tires in the rear. The literally have less than 200 miles on them and 6 track passes. Asking $1600 plus shipping. ( <--New Price)
I'm in no hurry to sell, just wanted to see if anyone wants them so please no low ball offers. May even consider a payment plan with 50% Down. Of course I hold the wheels until they are paid for and will not drag out the remaining balance for more than 2 months.




I'm in no hurry to sell, just wanted to see if anyone wants them so please no low ball offers. May even consider a payment plan with 50% Down. Of course I hold the wheels until they are paid for and will not drag out the remaining balance for more than 2 months.




Last edited by jtmiller92; Nov 1, 2006 at 09:18 AM.
Member
Joined: May 2006
Posts: 334
Likes: 1
From: Jupiter, Florida
Car: 92 Z-28
Engine: 305 TPI
Transmission: THM700R4
Axle/Gears: 2.73
they look really, really good. Those brakes don't hurt neither.
I am looking for rims and tires. Don't have the cash right now, just dreamin now. Do you know if 9's on the fronts and 10's on the rear is possible? Why did you choose to go with 8's and 9's?
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
9"s and 10's are definately possible. I ran 9.5's all around on the ROH ZS wheels i had previously. There are a few guys running 10's with no problems in the rear. I bought these because they were the only wheel that was available right away. Everything else i wanted was an 8-12 week wait at the time and these looked great and were on the shelf ready to ship. After having 9.5's on the front i wont ever run anything that wide again. It tracks to bad in the grooves on the road. 8's are plenty in the front for me.............jt
Interested
Hi there.
I'm interested in the wheels. Do you need any spacers or do they fit directly onto the car?
Let me know, I'm located in Toronto Canada
slupo@ozzcorp.com
I'm interested in the wheels. Do you need any spacers or do they fit directly onto the car?
Let me know, I'm located in Toronto Canada
slupo@ozzcorp.com
Member
iTrader: (12)
Joined: Jun 2006
Posts: 261
Likes: 0
From: Albany, GA
Car: 2008 F350 SuperDuty & few F-Bodies
Engine: Twin Turbo 6.4L Power Stroke
Transmission: Yeah, it has one.
Axle/Gears: Yeah, some of those too.
If you would consider $1500 for them I would be interested in them.
Trending Topics
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
Thanks for the offer but as of right now I cant take less than $1800 for the wheels.........jt
Member
Joined: May 2005
Posts: 107
Likes: 0
From: Goose Creek, SC
Car: 87 Trans Am
Engine: 434 being built
Transmission: 700R4
Axle/Gears: 3:73
Do you remember the back spacing and other measurements? I'm looking at ordering a custom set (Trakstar S Custom offset) from American Racing Wheel which own boyd covingtons now. Could I go bigger & wider?
Last edited by Tranny; Sep 5, 2006 at 07:12 PM.
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
Backspacing and size are listed in the first post. You can fit 9.5's in the front but i dont recomend it due to the front end tracking in the grooves on the road. You can do 10's in the rear with out them sticking out. Some guys have done 11's but they are right at the outer edge and in my opinion dont look very good. Thanks, Jt
Member
Joined: May 2004
Posts: 309
Likes: 0
From: Chandler Town
Car: 92 Firebird Convert & 91 Camaro RS
Engine: 305 L03 TBI
Transmission: 700r4 & T5
Axle/Gears: Stock
hi im interested in the wheels... whats your new asking price for them... and what would shipping be to 85029.. thanks
martin
martin
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
$1600 plus shipping to anywhere in the world. These need to go, i just ordered a new set of wheels for it. Offer still stands to take payments on them as long as you have some money to put down on them. Best Layaway deal your going to get............jt
Last edited by jtmiller92; Nov 1, 2006 at 09:20 AM.
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
$1300 for Wheels
$350 for Tires
or $1600 for wheels and tires.
Plus shipping.
$350 for Tires
or $1600 for wheels and tires.
Plus shipping.
Last edited by jtmiller92; Nov 1, 2006 at 09:22 AM.
Thread Starter
Senior Member
iTrader: (42)
Joined: Jun 2001
Posts: 929
Likes: 10
From: Nicholasville,KY
Car: 1992 Camaro RS
Engine: 415ci LS3
Transmission: T56
Axle/Gears: 3.89
TTT Guess there still for sale. Never recieved the money or a reply to my PM..............jt
Member
Joined: Apr 2003
Posts: 100
Likes: 0
From: Newport News, VA
Car: 1999 Mustang GT
Engine: 4.6 SOHC
Transmission: T-45
Axle/Gears: 4.10
interfac9@hotmail.com, or PM me.... I need these in my life!!!!
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Engine/Drivetrain/Suspension Wanted
3
Oct 4, 2015 09:44 PM
punkmaster98
Interior Parts for Sale
0
Sep 8, 2015 09:45 PM








