i have a third kid on the way so i am going to try and sell off as much stuff as possible, all cars, all parts performance and stock, all parts cars for parts or whole,
e-mail with needs or due i need to make a list

 

A list might generate some faster response. I can sympathize with you as far as having a family. I had to sell my toys until they all (5) grew up.

 

The piece that goes over the rocker panel (from front wheel well to rear wheel well). Must be in mint condition (no cracks or tears). If you have it, where in NJ are you, I will pick it up. Also how much are you asking?

 

thats more then i want, i have a 3 year old , a 1 1/2 year old and the other one on the way, did not expect to have them this close in age, becides if i put a list up i would make you go nuts looking at all the stuff,
quick and simple the parts are located at 3 houses, taking up 4 sheds 1 attic 2 basements a good size cornner of the backyard, and 4 full size garages, there is alot of parts


yes i due what color due you prefer if i can help you with that, and how does $40 sound and witch side? located in toms river, but work just off exit 117 on the parkway,

 

Do you have any aftermarket, adjustable torque arms? How about subframe connectors? You can PM me a list of any perfromance parts you might have.

Also looking for some nice sport seats and a good dash pad.

Let me know what you have.

 

Good luck with the third one. On the thread from yesterday I asked about the 5-speed shifter plate + the hurst shifter? You still Have? I'm putting a stick behind my 350. Do you also happen to have a scatter shield? I think you e-mailed me back yesterday but was about taillights? Thanks Again. John

 

I'll take it. "Passenger side 1991/1992 ground effect" The car is black, but I'd rather take the one in the best condition over color. I can pick it up Monday or Tuesday, what ever is good for you. You can e-mail me at FrankTA2@aol.com

 

want to sell me my 91 z28 convert back?

 

any 91-92 z parts cars or 85-90 irocs?

 

yes i due its a spohn one in black used for 1 week untill i put a t-56 in my convert, have brand ne spohn sun frame connectors in the box, hotchkis strut tower brace, stock wonder bar and a spohn wonder bar, also have spohn lower control arms, all gta seats need to be recovered, i think i have a good dash pad not sure if its camaro or pontiac,


yes i still have both, yes i have a scattershield, may have been,


i am off monday from work,not unless you want to come to my house to get it . i think the black one is the best one i have, will check


thats petes car he loves it cant wait untill he paints it,


have alot of parts what are you looking for. have cut up a bunch

 

PM sent

 

u wouldnt happen to have one front wheel 16x8 for a ld u 87 irocz wou

 

91-92 Z28 front ground effect in real good condition ?

 

I need the driver door gfx for a '91 firebird. Also, both front gfx and a working hatch motor.

 

yes i have 2 front camaro rims, e-mail me for some pics,

i have 2 one thats mint and one that has a 1 inch crack,

yes i do have the door ground effect, i also have both front lower ground effects not perfect but usable, i have pics, just e-mail me for them

 

PM Sent

 

do you have a t5 borg werner world class tranny. and how much shipped to coral springs florida 33076

 

how much for the spohn torque arm, is it tranny mount or x member mount? Spherical rod ends or polly bushings, and is it adjustable? very interested and cash in hand. lemmie kno.
Matt

 

I need the front lower chin spoiler ( i think is what it is called) below the front bumber cover for a 91 camaro RS. I also need a driver side door ground effects piece. The strip that goes down the door itself.
Thx
Lthrneck

 

subframe connectors shipped to 45344?

 

You got a power steering reservior, the 2 small grills for a 84 (Not z-28 one peice grill) and a steel 14' wheel?

 

yes i ahve a trans, will have to figure out how to ship,

trans mount, style, poly bushing, and adjustable,

i have a mint lower spoiler and a second spoiler with a 1/2 inch crack, witch one would you be interested in

the new sub fram connectors are for a t-top oar hardtop car

i have 2 small grill from an 83 z-28 are those the same grills? i have a power steering pump from a v-8 auto carb car

 

strut tower brace for a carb/tbi car?

 

tpi car

 

how much do you want for the SFC shipped to 60074?

 

how much for the torque arm shipped to 06512 and can i get some pictures?
Matt

 

Hey, I think those grilles should work . How much shipped to 27513 Cary, N.c.
And the power steering pump i would need a picture of to see it i could use that. Thanks

 

do u have a t5 tranny mount? its like a ball and socket type mount. pm plz

 

i am in need of l&r inner fender for 85 z28, no cracks or worn out mounting holes please, non ac heater control panel for same, wonderbar, piece that screws in across back interior that supports head liner in black (goes from side to side about 5 inches wide, don't know whatcha call it), and 1 strut tower cap in very good condition

 

I need tan T/A interior parts. PM me and let me know what you have. Thanks

 

how much for the stb shipped to 60007? do you have any aftermaket lowering springs or rear lca's?

 

do you have any more 91-92 front spoilers or are they all spoken for

 

1 rear IROC wheel 88-90 2line version,gold would be optimaal,but color really doesn' matter

 

stb to 60007 how much $$$$$???????????????

 

dude! hold on dont u realize that when ur kids grow up there gonna but mad that u got rid of ur stuff , cuz when they need college money ur stuff will be worth money! and then thell thank you for funding their schooling, just ask my ol man, he sold his 57`bel air conv. his 63 impala 409 ss, and his cabalarro, when each of us came around! oops! how much is that stuff worth now? and like us he thought it wasnt going to b worth squat, he was wrong, and we all had to pay 4 college r selvs. but if he would have held on to the stuff we would have struggled when it didnt matter, when we wre kids we didnt no the difference between havin it good or havin it rough! just remember the third gen IS the last all metal all american muscle car ever produced,,, but any way good luck and congrats!

 

subframes powdercoated? what color? bolt in or weld? would they fit my 1988 camaro sport coupe? how much shipped to 12309. cash on hand.

 

Thanks for the parts PM sent

 

New PM sent.............

 

What kind of grills do you have?? Louvered or fog lighted?? And if you do how much shipped to 58027?? Thanks!

-Tyler

 

Do you have any aftermarket suspension pieces, interested in camber caster plates, struts, springs, control arms, lca relocating brackets, panhard rods, anything and everything suspension that is aftermarket. let me know if you have anything, thanks. Patrick

 

happen to have a set of headers (maybe edelbrock) that would fit an 87 iroc 350?

 

Do you by chance have a mint condition automatic shifter plate for a 91-92 Z28?

 

Does this mean the above mentioned T56 may be for sale?

Do you have driverside cup holder (charcoal) for 91 ta?

 

any sfcs left?

 

Do you have any Z28 fog lights?
PM sent anyway

 

Im looking for either a fiberglass bolt on hood that will fit a 84 camaro would like one with a scoop. Or an aluminium one with louvers. I would prefer functional but nonfunctional is ok. z-28, iroc or aftermarket.
If you dont have the whole hood would you have the louvers with the 8 pin mounting?
Also if you might have a windshild wiper control for the wipers for a 84 Camaro Berlinetta with the digital dash
Or if you would have any of the dash pods that hold the heater and light switches for the same Berlinetta.

 

I am looking for a complete posi rear end. Also i need a driverside fender.

 

Hey ted, i spoke to you emails a while ago i bought a black 88 iroc vert you used to own. I am wondering if you have a fuel sending unit for a carb'd camaro. If so how much??

 

do you have any 91-92 bird front fender gfx?

 

Lookin for a center spoiler for a vert. Can u help?