Stripping a 1992 Z28 for a track car, many parts for sale
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Stripping a 1992 Z28 for a track car, many parts for sale
Ok, I bought a 1992 Z28 and sold my 2002 Camaro.
25mm rear suspension techniques sway bar $100 OBO
Glassteck 2" cowl "bolt on" hood with latch and hinges $300 OBO
A set of 1992 Z28 wheels (16" alloys, the finish is in rough shape, but I think they are round enough for track wheels, though at least one has a little run out on the bead/rim edge) They include a set of H rated all season Goodyears with under 1,000 miles on them. $185 OBO
Factory camber plates and hardware. $30 OBO
Stock brake calipers with about 1/2 of a set of pads and factory style rubber brake hoses. $10 OBO
Stock front rotors (factory size, may not be GM rotors). $20 for the pair
I'd prefer local pick up in Galloway, OH or close to it (I have a truck and can meet you somewhere in a 20 mile radius). I'm open to offers on all of it. Some of this stuff seems to go for "stupid" prices on some of the boards, some seems to go for "free". If I'm way off base, say so and I'll work with you. The stuff is off and I'm not going to use it, so if you need it, lets talk.
Shipping is extra. I'm located in Galloway, OH 43119. Some items are not able to be shipped unless I can find boxes, and a safe way to package them. Most items can be shipped and I'll try to work with you to do that. Or, local pick up is fine.
Thanks!
trackbird(at)columbus.rr.com
25mm rear suspension techniques sway bar $100 OBO
Glassteck 2" cowl "bolt on" hood with latch and hinges $300 OBO
A set of 1992 Z28 wheels (16" alloys, the finish is in rough shape, but I think they are round enough for track wheels, though at least one has a little run out on the bead/rim edge) They include a set of H rated all season Goodyears with under 1,000 miles on them. $185 OBO
Factory camber plates and hardware. $30 OBO
Stock brake calipers with about 1/2 of a set of pads and factory style rubber brake hoses. $10 OBO
Stock front rotors (factory size, may not be GM rotors). $20 for the pair
I'd prefer local pick up in Galloway, OH or close to it (I have a truck and can meet you somewhere in a 20 mile radius). I'm open to offers on all of it. Some of this stuff seems to go for "stupid" prices on some of the boards, some seems to go for "free". If I'm way off base, say so and I'll work with you. The stuff is off and I'm not going to use it, so if you need it, lets talk.
Shipping is extra. I'm located in Galloway, OH 43119. Some items are not able to be shipped unless I can find boxes, and a safe way to package them. Most items can be shipped and I'll try to work with you to do that. Or, local pick up is fine.
Thanks!
trackbird(at)columbus.rr.com
Last edited by trackbird; Jul 16, 2007 at 02:01 PM. Reason: Updated list/added new stuff, removed sold stuff
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
I'll edit the post and update the list.
The shocks and KYB's are not off yet, but they should be coming off next weekend (if all my other stuff arrives).
The shocks and KYB's are not off yet, but they should be coming off next weekend (if all my other stuff arrives).
Supreme Member
Joined: Oct 2001
Posts: 1,648
Likes: 0
From: Olean NY USA
Car: 1985 Camaro Z28/1989 Pontiac Trans Am GTA
Engine: 305 tpi/350tpi
Transmission: 700r4
Trending Topics
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
Let me take some pics and I'll shoot them your way. I don't have a way to ship it and I noticed that your location is New York. Any chance you'll be in the Columbus, Ohio area?
Thanks,
Kevin
Thanks,
Kevin
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
85maroZ28 and GlennC, I'll try to get those pics taken today.
Member
Joined: Feb 2006
Posts: 164
Likes: 0
From: Hoschton, Ga
Car: 1987 IROC Camaro
Engine: 305 carb
Transmission: 700-R4
Axle/Gears: open diff ?ratio
Re: Stripping a 1992 Z28 for a track car, many parts for sale
You wouldn't happen to have a 5-speed setup would you?
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
Sorry, this is a 6 speed car. The 6 speed is on my list of things to remove at some point, but it probably won't be for a year or so. I want to switch to a Richmond 5 speed for track use, but it will be a while.
You'd be 3rd in line for them. I'm hoping to receive my other parts in the next few days and I'll start tearing the current shocks/springs, etc off of the car at that time. So, I'm hoping to have it done by next weekend.
You'd be 3rd in line for them. I'm hoping to receive my other parts in the next few days and I'll start tearing the current shocks/springs, etc off of the car at that time. So, I'm hoping to have it done by next weekend.
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
Re: Stripping a 1992 Z28 for a track car, many parts for sale
still have the hood? id like pics sent to kennylink5@yahoo.com please... I have cash in hand!
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
Pics sent.
GlennC, I'm still trying to get the stack of tires out of the corner so I can take pics of them (wheels and tires). I'll make an effort to do it tomorrow.
Thanks!
GlennC, I'm still trying to get the stack of tires out of the corner so I can take pics of them (wheels and tires). I'll make an effort to do it tomorrow.
Thanks!
Re: Stripping a 1992 Z28 for a track car, many parts for sale
would like to come and get those tires from ya, do you have something you are needing for your car? I have access to a garage....which has about everything from bumpers to center consoles,from tpimotors to tpi extras. I have many things. if there is something you are looking for let me know
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
Do you want the tires and wheels or just tires? And, I'm located in Columbus, OH.
Thanks!
Thanks!
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
still have the hood? id like pics sent to kennylink5@yahoo.com please... I have cash in hand!
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
There's still some stuff available!
Thanks!
Thanks!
Last edited by trackbird; Jul 4, 2007 at 12:07 PM. Reason: Clarity
Member
iTrader: (1)
Joined: Jan 2005
Posts: 317
Likes: 0
From: willow grove, PA
Car: 1992 Camaro vert
Engine: 355
Transmission: 700r4
Axle/Gears: 10 bolt... not blow up yet
Re: Stripping a 1992 Z28 for a track car, many parts for sale
nope nadda... i dont even need the hood anymore. i got a 2.5in cowl now but thanks anyway...
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Member
Joined: Oct 2004
Posts: 449
Likes: 0
From: waverly ia
Car: z28
Engine: 305
Transmission: pro built 700r4 (road racing kit)
Re: Stripping a 1992 Z28 for a track car, many parts for sale
Ill need to see some pics of the hood b4 ill make u an offer…. and are u willing to ship???
Thread Starter
Member
iTrader: (7)
Joined: Jun 2005
Posts: 107
Likes: 1
From: Columbus, OH
Car: 1991 Corvette
Engine: 353 cu in
Transmission: M6
Axle/Gears: 3.45
Re: Stripping a 1992 Z28 for a track car, many parts for sale
I've got pics, but I don't have a way to ship it.
Member
Joined: Oct 2004
Posts: 449
Likes: 0
From: waverly ia
Car: z28
Engine: 305
Transmission: pro built 700r4 (road racing kit)
Re: Stripping a 1992 Z28 for a track car, many parts for sale
well i would still like to see the pics... plz send them to mrblack_burn@yahoo.com or host them in this tread.... and dont you have a ups store around you, i kno many people think its hard to ship larg iteams but in fact its very eassy.... if you take the hood to them they will be able to provide you with a box, and if you wanted they will even package the hood for you, for a small fee... just thought id let you know... im willing to pay for shiping, that not a big deal...
Junior Member
Joined: Jan 2006
Posts: 21
Likes: 0
Car: 85 Z28
Engine: GM crate ZZ4 w/ fast burn heads
Transmission: TH350
Re: Stripping a 1992 Z28 for a track car, many parts for sale
pics of the hood please if you still have it... indyantihero@yahoo.com thanks
Junior Member
Joined: Dec 2007
Posts: 29
Likes: 0
From: Indianapolis
Car: 2005 Chevy Colorado/ 1985 Z28
Engine: fast burn zz4
Transmission: th350
Axle/Gears: 10 bolt (has to go) 3:23 gears
Re: Stripping a 1992 Z28 for a track car, many parts for sale
still have the hood? if so pics to indyantihero@yahoo.com i live in indianapolis i could pick up the hood
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
Oct 6, 2016 09:08 AM




