91_5.7_TPI

iTrader: (2)

Got the car back with the ZR1s on it. Friend helped me wash it and took pictures of it....










what yas think?

Red1992V6Rs

Looks awesome. Those wheels are some of my favorites for thirdgens.

Bullydawg

iTrader: (7)

I would have to say that looks very good. Well Done! I think I might get some Z06 wheels for my car this summer. How much were the spacers?

blyth18md

They need to be black

91_5.7_TPI

iTrader: (2)

Thanks!

I'm thinking about C5 Z06 wheels for mine. heh I got them used pretty cheap from a friend on Z28.com, but they run $150 per pair new from Skulte. I just needed fronts cause of my 4th gen rear.

That's what I hear alot from you, hahaa

rwdtech

what sizes, offsets, adapters, and tire size did you use?

thanks

Z.ROC28

Looks great! I've always liked those wheels. I'm interested to see a dished version of those. But I agree, they would really set off your car if they were black even though they look great as they are now.

91_5.7_TPI

iTrader: (2)

I used 17x9s in 275/40R17s with a 2" spacer in the front and a fourth get rear.

Thanks. Yea, I thought about the SLP version (dished) but...eh. too much cabbage, haha. I'm considering the black, though I think I'll them as is for now.

rwdtech

what offset was that?

91_5.7_TPI

iTrader: (2)

Oh, 56+ I think.

Why? thinking about ZR1s

Legal Disaster

iTrader: (6)

I also like the look of ZR1's on our cars. I recently bought some for my car, but have only gotten around to test fitting them so far. I got the 9.5 front and 11 inch rears. As soon as I get all my brake upgrades and my A-arms come in they are finally going to be on. I think that black looks a ton better than the silver. Did you get your's from TomZ Wheels or another place?

maroon88iroc

iTrader: (7)

should have went with chrome. the factory wheels in your sig look better imo.

85maroz28

Fit the car nicely...

91_5.7_TPI

iTrader: (2)

Got the wheels and tires used from a guy on LS1Tech. Kinda wished I'd got new ones.

Chrome would hve looked good, but chrome is heavier than paint...alot. I like to keep weight off. I do like the stockers, but these are wider, taller, and some how lighter.

Thanks, I think so too.

91_5.7_TPI

iTrader: (2)

Fixed the center cap problem...I like. How about you guys?



Matches the stock RS emblems.

Tobias05

looks pretty good!

MillerTime21

They look good, but I also think black would look better.

Demon355

iTrader: (1)

ZR1's look awesome on 3rdgen's. To each their own when it comes to rim color but I personally would have them black with a polished lip. GS styles Looks good though dude, nice!

85_ZED28

lookin' good, I like them silver

91_5.7_TPI

iTrader: (2)

I may be selling the ZR1s and getting a set of C6 base wheels...haha.

tweeker

Damn looks good

irishhockey34

iTrader: (12)

wheels look great! huge fan! btw, i have a quick question about your hood.(sorry off topic) but does that SS hood give you any more clearence under the hood than the stock hood?

Thanks

91_5.7_TPI

iTrader: (2)

Thanks guys!
The SS hood give me a little more clearance below the scoop. Maybe about 2-3 inches or so. I'll try to find or get a underhood shot for you.

irishhockey34

iTrader: (12)

It would be GREATLY appreciated if you could. I need about an extra inch of clearance but am trying to stay away from the traditional cowl hood. A pic would be GREAT

Thanks

91_5.7_TPI

iTrader: (2)

If all you need is an inch, then the SS hood would be fine. Well, at least one like mine. There are several other brands. It's pouring the rain right now, but I'll get one when I can.

Imadude_134

iTrader: (9)

I have the SLP silver ones on my 91 RS



I will see if I can get a better pic, cuz that one was take all the way across the street

irishhockey34

iTrader: (12)

Thanks, whenever you get a chance is fine

Heres a quick photoshop of what I want my car to look like just for fun:

91_5.7_TPI

iTrader: (2)

How wide are the tires on your car, man? Mine are 275s, but yours look fat...lol

That's looks pretty good. I didn't like the idea of the red stripes with the black t-tops for my car. I hope you don't live near me though. lol

89RsPower!

Curious about skulte, what is their website? And is that price for the 17X9.5 ZR-1's?

irishhockey34

iTrader: (12)

Ha, and why can't I live near you??:???

91_5.7_TPI

iTrader: (2)

skulte.com is their website. And it is $150 per pair for the spavers you'll need. Or, you can run spacers on the front and a 4th gen rear on the back.

Cause, your car would be too similar to mine. haha

irishhockey34

iTrader: (12)

ha you're right. Its nice have a one of a kind car in your area.

supercharged383

I agree that would look great i love the 3rd gens in white i might get mine painted that color

Imadude_134

iTrader: (9)

Personally, I think the only time that white looks good is with the black headlight pockets... Then they look pretty killer...

And at the time that pic was taken, the rear tires were 285/50/17, and the fronts were 245/50/17. But I had rubbing issues on the back, so now I have 245/45/17 all the way around. Even still it looks pretty nice. I loved the look of the 285s in the back... but I couldnt stand the ear-piercing scrape everytime I went over a dip/pothole/speedbump... just about anything.

I think the only thing that ur car needs now is white bulbs for your front and sideblinkers, or smoked lenses front and side blinkers... to go with the black headlight pockets and the black stripes... but thats just my .02

Looks good

-Tim-

CanadianRoots

iTrader: (1)

Where did you get those center caps?? I have almost identical rims except mine are all black and I've been trying to figure out some way to do something like that with mine!!

91_5.7_TPI

iTrader: (2)

As far as I know, my car is the only 3rd gen with my exact set of exterior mods....so far.

Mine was white to start with and I thought about going to gunmetal or silver, but I didn't want to pay to have it switched over right...so I just changed a few things, lol.

Mine actually scrape less with the 275s all around than my stock 16s do... but that's cause I have the 4th gen rear end and the 16s don't fit that well in the rear with it. Mine came with 285s on the rear, and they didn't look that fat...must be a difference in tires. My front corner markers are aftermarket clears, but with yellow bulbs. And the fronts are new GMs. I just like the amber bulbs better than clear for some reason.

They aren't center caps, they are a 3 layer vinyl that goes over the center-cap. Had them made locally. If you're interested, I'll see how much they are (like $20 I think) and tell me what colors you want the lettering to be and I'll send you a set...well, you'll have to give me the money for them. lol

CanadianRoots

iTrader: (1)

I would love to get my hands on a set... My wheels are Black and the car is like a maroon... If you could try and match something up with those colors that would definitely be awesome!!!

91_5.7_TPI

iTrader: (2)

I'll see what I can do. It's snowing here, so work is out tomorrow. I'll stop by and check on the pricing for you. I need to check on the progress of my new gauge over-lays too. I'm pretty sure they could do black and maroon. Would you want maroon to match the car or red to match the calipers? I'll warn you, I'll be able to get the colors close, but not exact. They only have so many colors and I don't have your car, haha.

CanadianRoots

iTrader: (1)

I thought about that... as far as maroon or red... honestly either... I think this is a small enough piece that even if its not a perfect match to the body its not going to be that noticable. I think if they have maroon and its a decent color (Not purpleish) then go the maroon route... If not then Red would work since the calipers all the way around are all red!

Thanks Again!
-Chris

91_5.7_TPI

iTrader: (2)

Alright. I'll check prices and colors and then get back to you. If they have what you want, you can send me the money for them over PayPal and I'll get 'em shipped out to you. Shouldn't be much, just the cost of decals, a stamp and envelope, and maybe a couple of bucks for the leg work

irishhockey34

iTrader: (12)

any pics of the underside of your SS hood yet? They would be greatly appreciateddd

91_5.7_TPI

iTrader: (2)

The weather just cleared up today, but I spent all day working on my gauge cluster and installing steroes. I'll get some tomorrow when I change my thermostat.

irishhockey34

iTrader: (12)

alrighty, thanks
----------
alrighty thanks

91_5.7_TPI

iTrader: (2)

I've not forgotten you!! I just can't get my camera and computer to play nice together. When I put the memory card in the computer, it says it needs to reformat the card.... I'll try to find the USB cable and go that route.

bonddav

what size tire are you runing on the zr1 wheel the side wall loks high then 45 for me to go to 17" i was told i have to go from 245/50 to 245/45

Imadude_134

iTrader: (9)

And at the time that pic was taken, the rear tires were 285/50/17, and the fronts were 245/50/17. But I had rubbing issues on the back, so now I have 245/45/17 all the way around.

tony_cogliandro

iTrader: (3)

its a very nice looking car but i don't like the rims. i like the crager for after market, and the original rims at 15 inch are there too.
i prefer a rim that is not flat like a pancake.
but they are very nice.

Imadude_134

iTrader: (9)

The SLP 3rd gen specific ones are not flat like the ones on the 4th gen are. They have a lip between the rim of the wheel and the face of the wheel. I don't have any up close pics of it, but I will take one tomorrow and post it up (along with how it looks with the 245/45/17s)

Imadude_134

iTrader: (9)

Sorry it took so long... Some things came up... But here are the pics:

91_5.7_TPI

iTrader: (2)

Those do look good. I wish that the ones I have had a lip like that. That lip plus 9 inches wide would be nice