Make dibs just in case this beast doesn't sale!
#1
Make dibs just in case this beast doesn't sale!
Alright. It's time to unload this beast to someone who can devote there time and skills on it. This has been a project of gathering parts and fixing up over the past 5 years. What this car is, is a 1985 Z28 Camaro. It only has 85k on it and is from Arizona, so no rust! The car is extremely clean. On to the list of parts to be given to the buyer of this car.
I have:
A complete set of 91-92 Aero Ground effects.
Brand new 92 limited edition rear spoiler (high-rise)
Brand new 82-92 SS fiber glass hood
Clean with tires 16" 1989 Iroc-z Wheels
New Msd 6al Box
MSD Hei Coil
New Msd Prom chip, or Module some people call it.
New Smoked front and rear light covers. Sold
New Clear headlight covers
B&M console mount ratchet shifter for th350/400, or 700r4 Like new, maybe used 10 times.
March pulley setup (serpentine) On the car for less then 100 miles
TCI Rattler Dampener 100 miles
TCI Flex Plate 100 miles Sold
Chrome 1 Wire hookup Altenator 100 miles
A set of Keystone Classic wheels w/Bfg Tires (excellent shape) tires have roughly 3k on them.
Barry Grant 750 Mighty Demon carb. Mech secondaries 100 miles Sold
Brand New Dash pad.
Polished High flow water pump 100 miles
Hooker Shorty Headers
New Electric Fan
Big external trans Cooler 100 miles Sold
2 1/2" exhaust off of each header and when it merges on the y it connects into a sleek and well performing 3" exhaust with a borla muffler (Dual rear exit)
Almost all of this is new, either way it's in good shape, I didn't want to put new on the start of every line though!
Also in this package is a 6k dollar 383 stroker crate engine with edelbrock aluminum heads 64 cc combustion chambers, scat crank, shot peened and stress relieved rods, as well as hypereutectic Pistons, 10.3 to 1 compression. Only 5k miles on this engine. Here's the link to where it came from and the exact build: http://www.enginefactory.com/stroker.htm
There are 2 transmissions in this deal. One is a excellent working fresh 700r4 with a transgo or b&m shiftkit and an in town made 2500 stall converter 100 miles if your lucky. And the other is a completely stock good working th350.
There are also 2 rearends in this deal. One being a stock 10 bolt with a posi unit in it. Next being a 10 bolt disc brake setup, which includes the proportioning valve and it is a limited slip rearend.
Just in parts alone there is over 10k worth of stuff. I have looked on ebay as well as forums and free classified sections. I could part this car out for a easy 6k without a doubt in my mind. I am not into shipping and running all over the place. Nor do I have a truck to move things around with.
I am going to start this out at $4500 obo and work from there. The body is extremely clean and has been taken completely apart and painted under the hood. I removed the ac, heater, and all computer controlled devices as well as the computer. Engine bay has been completely smoothed and painted gloss black. The engine bay is priceless, even the cross member and wheel wells. The interior is not complete but is for the most part. I did take the carpet and headliner out (sagging) The seats are not bolted in but are included. The interior is red. Also includes stock hood and ground effects and anything else I may have for this. I should have never touched this car. Not to say it's not clean anymore. I just should have never gotten into it as far as I have and then taken the break I did. Then to the extent of buying a Ls1 car ruined the whole 3rd gen idea. Let me know your thoughts and desires. Thanks, Dan
P.S IF this car does not sell in a timely manner I will be parting it out. Please send REASONABLE offers to me in pm. Thanks, Dan
Some pics of parts and of the car: http://s143.photobucket.com/albums/r...20and%20parts/
I have:
A complete set of 91-92 Aero Ground effects.
Brand new 92 limited edition rear spoiler (high-rise)
Brand new 82-92 SS fiber glass hood
Clean with tires 16" 1989 Iroc-z Wheels
New Msd 6al Box
MSD Hei Coil
New Msd Prom chip, or Module some people call it.
New Smoked front and rear light covers. Sold
New Clear headlight covers
B&M console mount ratchet shifter for th350/400, or 700r4 Like new, maybe used 10 times.
March pulley setup (serpentine) On the car for less then 100 miles
TCI Rattler Dampener 100 miles
TCI Flex Plate 100 miles Sold
Chrome 1 Wire hookup Altenator 100 miles
A set of Keystone Classic wheels w/Bfg Tires (excellent shape) tires have roughly 3k on them.
Barry Grant 750 Mighty Demon carb. Mech secondaries 100 miles Sold
Brand New Dash pad.
Polished High flow water pump 100 miles
Hooker Shorty Headers
New Electric Fan
Big external trans Cooler 100 miles Sold
2 1/2" exhaust off of each header and when it merges on the y it connects into a sleek and well performing 3" exhaust with a borla muffler (Dual rear exit)
Almost all of this is new, either way it's in good shape, I didn't want to put new on the start of every line though!
Also in this package is a 6k dollar 383 stroker crate engine with edelbrock aluminum heads 64 cc combustion chambers, scat crank, shot peened and stress relieved rods, as well as hypereutectic Pistons, 10.3 to 1 compression. Only 5k miles on this engine. Here's the link to where it came from and the exact build: http://www.enginefactory.com/stroker.htm
There are 2 transmissions in this deal. One is a excellent working fresh 700r4 with a transgo or b&m shiftkit and an in town made 2500 stall converter 100 miles if your lucky. And the other is a completely stock good working th350.
There are also 2 rearends in this deal. One being a stock 10 bolt with a posi unit in it. Next being a 10 bolt disc brake setup, which includes the proportioning valve and it is a limited slip rearend.
Just in parts alone there is over 10k worth of stuff. I have looked on ebay as well as forums and free classified sections. I could part this car out for a easy 6k without a doubt in my mind. I am not into shipping and running all over the place. Nor do I have a truck to move things around with.
I am going to start this out at $4500 obo and work from there. The body is extremely clean and has been taken completely apart and painted under the hood. I removed the ac, heater, and all computer controlled devices as well as the computer. Engine bay has been completely smoothed and painted gloss black. The engine bay is priceless, even the cross member and wheel wells. The interior is not complete but is for the most part. I did take the carpet and headliner out (sagging) The seats are not bolted in but are included. The interior is red. Also includes stock hood and ground effects and anything else I may have for this. I should have never touched this car. Not to say it's not clean anymore. I just should have never gotten into it as far as I have and then taken the break I did. Then to the extent of buying a Ls1 car ruined the whole 3rd gen idea. Let me know your thoughts and desires. Thanks, Dan
P.S IF this car does not sell in a timely manner I will be parting it out. Please send REASONABLE offers to me in pm. Thanks, Dan
Some pics of parts and of the car: http://s143.photobucket.com/albums/r...20and%20parts/
Last edited by ALTRDTA; 08-21-2007 at 02:56 PM.
#2
Senior Member
Joined: Mar 2007
Posts: 343
Likes: 1
From: Jackson, Michigan
Car: 83 Trans Am
Engine: LT1 350
Transmission: 5 Speed manual
Axle/Gears: 3.73 10bolt till it breaks
Re: Make dibs just in case this beast doesn't sale!
Post location and you definitely need to post pictures
#3
Re: Make dibs just in case this beast doesn't sale!
Yeah, I forgot about that. I am located in SLC, UT. I do have pics that I will be uploading for your viewing pleasure in the morning. Thanks!
#4
Joined: Feb 2005
Posts: 408
Likes: 1
From: Trumbauersville PA
Car: 88 IROC-Z twin turbo
Engine: forged 383 8-1 compression
Transmission: t56
Axle/Gears: 9in 3.50's trac loc moser axles
Re: Make dibs just in case this beast doesn't sale!
want to sell the hood? if so how much?
#5
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Re: Make dibs just in case this beast doesn't sale!
OK guys, I know this car... and WOW. Under that hood takes your breathe away!
With all the parts he has invested into this to make it complete... over $12k that I know of! That doesn't include all the little details that add up!
Someone needs to jump on this deal!
With all the parts he has invested into this to make it complete... over $12k that I know of! That doesn't include all the little details that add up!
Someone needs to jump on this deal!
#7
Re: Make dibs just in case this beast doesn't sale!
The hood will be available to the public shortly, if the car is not sold. The hood is brand new. I will not take a huge hit on this hood as I am sure I will own a 3rd gen again someday and it wouldn't be worth it to me to lose my a**... Shoot me offers in PM
Pics added at the bottom of the listing in a link...
Pics added at the bottom of the listing in a link...
Last edited by ALTRDTA; 08-12-2007 at 07:23 AM.
Trending Topics
#11
Supreme Member
iTrader: (35)
Joined: Feb 2003
Posts: 1,229
Likes: 3
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: Make dibs just in case this beast doesn't sale!
I might be interested in the ground effects and the fresh 700R4. If you part out, would you post pictures and prices? Thanks!
#12
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: Make dibs just in case this beast doesn't sale!
I am out on the hood shipping wouldn't make it worth it. I would however be interested in the clear light covers and the smoked rear covers. how much?
#13
Re: Make dibs just in case this beast doesn't sale!
Ok guys, I am not posting prices yet as I am trying to sell the car as it is with all of these parts. Think of it this way. You can buy the car, save me the headache, keep what you want and sell what you don't. Your not going to be losing money by any stretch, I have already done that for you. If you are interested in something. Pm me what you would give me for it. And be reasonable, 85% of this stuff is NEW.
Edit: I went through and put everything that was new and also what was like new. Everything that says 100 miles is actually less then that, but I am giving you the benifit of the doubt. I went to 1 car show and drove it to a buddy's house once. That is it with the parts marked as 100 miles. My buddys house was 10 miles one way, car show was like 3 miles away. Thanks
Edit: I went through and put everything that was new and also what was like new. Everything that says 100 miles is actually less then that, but I am giving you the benifit of the doubt. I went to 1 car show and drove it to a buddy's house once. That is it with the parts marked as 100 miles. My buddys house was 10 miles one way, car show was like 3 miles away. Thanks
Last edited by ALTRDTA; 08-13-2007 at 06:57 PM.
#14
Re: Make dibs just in case this beast doesn't sale!
TTT I am parting this out. Send your offers. I have a lot of it pending payment so let me know quick. I do accept paypal but you will pay the charges, as well as shipping cost being covered by you...
#17
Re: Make dibs just in case this beast doesn't sale!
Alright, the hood is going to be a PITA to ship. Just to package it at the local ups it's going to cost 60 plus the shippings fee's which will be over 100.
Pm replied on the headers
Headlight and tail light covers sold locally as well as the carb, and flywheel.
Dash pad sold pending payment.
Let's get this stuff moving. Paypal accepted. Thanks, Dan
Pm replied on the headers
Headlight and tail light covers sold locally as well as the carb, and flywheel.
Dash pad sold pending payment.
Let's get this stuff moving. Paypal accepted. Thanks, Dan
#23
Supreme Member
iTrader: (35)
Joined: Feb 2003
Posts: 1,229
Likes: 3
From: Albuquerque, NM
Car: 1966 El Camino Custom
Engine: 350
Transmission: 200R4
Axle/Gears: 3:73 12 bolt with Brute Strength
Re: Make dibs just in case this beast doesn't sale!
Interested in the 700R4 and torque converter. How much? Thanks.
#26
Re: Make dibs just in case this beast doesn't sale!
March pulleys, water pump, and alt SOLD!!! Dash pad still available guys. Pick it up for 200+shipping. You wont find a better deal for a NEW dash pad!!!
Thread
Thread Starter
Forum
Replies
Last Post