drop spindles, caster plates, shocks, struts, alt, pulleys, more
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
drop spindles, caster plates, shocks, struts, alt, pulleys, more
AJE 1.8" drop spindles These are brand new never mounted $250
BBK caster camber plates These are brand new never mounted. $175
Spring Tech shocks and struts these are new never used. There is some surface rust on the clips from sitting as seen in the pic. $100
85-89 tpi air cleaner Y top. I don't have the bottom to this. $15
82-84 metric trans shifter plate. The plate itself is in good shape but the shift indicator has some rust on it. not really sure how to clean it. I am sure it can be done but I bought another plate. $35
stock alternator off of my 87 Iroc. I got bored and started to polish the case and never got around to finishing it. I put a v belt pulley on it to use on my 406 that I never finished and I have another one now so I don't need this one. $45
CSI billet aluminum water neck. 360 swivel with an O-ring seal. great piece but I am using AN fittings for everything now. This is brand new out of the pack. $50
assorted cv products pulleys. $20 for all
LMK if the pics don't work for some reason and I can send them to you. All prices are plus shipping. may be interested in trades let me know what you have.
__________________
BBK caster camber plates These are brand new never mounted. $175
Spring Tech shocks and struts these are new never used. There is some surface rust on the clips from sitting as seen in the pic. $100
85-89 tpi air cleaner Y top. I don't have the bottom to this. $15
82-84 metric trans shifter plate. The plate itself is in good shape but the shift indicator has some rust on it. not really sure how to clean it. I am sure it can be done but I bought another plate. $35
stock alternator off of my 87 Iroc. I got bored and started to polish the case and never got around to finishing it. I put a v belt pulley on it to use on my 406 that I never finished and I have another one now so I don't need this one. $45
CSI billet aluminum water neck. 360 swivel with an O-ring seal. great piece but I am using AN fittings for everything now. This is brand new out of the pack. $50
assorted cv products pulleys. $20 for all
LMK if the pics don't work for some reason and I can send them to you. All prices are plus shipping. may be interested in trades let me know what you have.
__________________
Last edited by jstoltz; Dec 12, 2007 at 06:55 AM. Reason: add more info
Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 574
Likes: 0
From: Richlands N.C.
Car: '92 RS
Engine: 350 carb'd
Transmission: T-5
Axle/Gears: 4.10
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
How much to ship the shifter plate to 28574? Thanks Alex
Member
iTrader: (1)
Joined: Nov 2007
Posts: 243
Likes: 0
From: Sacramento CA
Car: 1982 Z28
Engine: 385ci w/carb
Transmission: TH350 w/3200ish Stall
Axle/Gears: 10 bolt :( 3.23 gears w/ posi
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
how much to send the pulleys to 99506
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
$5 on the pulleys and $10 on the shifter plate. priority mail on both. insurance is extra $1.50
Junior Member
Joined: Dec 2002
Posts: 10
Likes: 0
From: Woodstock,GA
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
When did you purchase these spindles? I counld not find just the spindles by themselves at the AJE website. I know PA Racing has them also but I am interested in your set. I hope you still have these. Also will these work with aftermarket wilwood brakes Please reply. Thanks.
Trending Topics
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
I bought these off another member on here. they may work not real sure I know there was some slight mods to make them work on the c5 brakes. nothing too hard. also if you want them I will do $260 shipped anywhere in the cont US
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
I don't sorry. I had to closed my checking account and don't have a bank right now.
Senior Member
iTrader: (2)
Joined: Sep 2005
Posts: 743
Likes: 0
From: Highwood, IL
Car: 1983 trans am
Engine: Vortec 350 w/ a comp cam
Transmission: B&Mth350 2800holeshot
Axle/Gears: 10bolt 3.23's
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
BBK cc plates shipped to 60040?
Supreme Member
iTrader: (7)
Joined: Aug 2005
Posts: 1,068
Likes: 1
From: Ohio, near columbus
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
i currently have a factory ride height on my car would those dampers still work for me before i swap springs out (i would expect so just possibly not optimal). I plan to in the future but, i need a decent set of shocks n struts in the mean time since mine are super worn.
Anyways pm me i could send out a m/o friday if the product fits.
Anyways pm me i could send out a m/o friday if the product fits.
Junior Member
Joined: Jun 2006
Posts: 69
Likes: 0
From: so. indiana
Car: 85 firebird
Engine: 305 ci. 4 bbl.
Transmission: 700r4
Axle/Gears: one wheel peel
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
how much to sent the alt to vincennes in. 47591
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
so far everything is left other than the shifter plate it is sold.
Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 574
Likes: 0
From: Richlands N.C.
Car: '92 RS
Engine: 350 carb'd
Transmission: T-5
Axle/Gears: 4.10
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
Just got home and the shifter plate was here waiting here !! Thanks
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
**bump**shocks and struts are gone now too also if the caster plates and spindles are sold together I will knock off a little more. $410 shipped.
Last edited by jstoltz; Jan 4, 2008 at 01:35 PM.
Junior Member
Joined: Dec 2002
Posts: 10
Likes: 0
From: Woodstock,GA
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
I am interested in the spindles but I am not about spending the money if they might not work with my exsisting Wilwood brakes. Are you willing to drop price on these also?
Junior Member
iTrader: (2)
Joined: Dec 2002
Posts: 22
Likes: 0
From: Wasilla, Alaska
Car: 1992 Heritage edition Z28
Engine: 5.7 L98
Transmission: 4L60 700R4
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
I am interested in the caster plates. How much to ship to 99654?
I have to sell some parts first but am interested.
Thanks,
Zach
I have to sell some parts first but am interested.
Thanks,
Zach
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
I have a couple people interested in the caster plates, so first one with payment sent and verified, that's who gets them
on the spindles how much are you thinking? I am not giving them away. They will work with wilwood. Those were actually the brakes these were designed. I can give you Jim's # at AJE and he will tell you the same.
on the spindles how much are you thinking? I am not giving them away. They will work with wilwood. Those were actually the brakes these were designed. I can give you Jim's # at AJE and he will tell you the same.
Thread Starter
Supreme Member
iTrader: (16)
Joined: Dec 2001
Posts: 2,006
Likes: 1
From: Tiffin OHIO
Car: 1987 Iroc-z Convertible
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
$200 for the spindles if someone can commit to buying them this week. I don't need them and need the room.
Supreme Member
iTrader: (3)
Joined: Jan 2004
Posts: 2,311
Likes: 0
From: p'cola FL
Car: 88 iroc-z/28
Engine: 408 lsx
Transmission: 5800 stall
Axle/Gears: 4.71
Re: drop spindles, caster plates, shocks, struts, alt, pulleys, more
i purchased these spindles and they are FOR SALE if anyone is interested.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM
1992 Trans Am
Suspension and Chassis
1
Aug 9, 2015 04:32 PM
