Parting out 91 RS and 89 WS6
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Parting out 91 RS and 89 WS6
Hi, I was originally going to part out my 91 rs but changed my mind, now i being forced to get rid of it so I am parting everything out as fast as I can before I take the cars to scrap. The 91 RS has grey interior and was a 305 TBI auto engine with the 700R4 transmission, the other car that I am parting out is an 89 Firebird Formula with the WS6 suspension, this car also has grey interior. Everything is available on both cars, I am not sure if I am going to sell the GFX off the 91 rs though, may use them on my other camaro (if someone was interested in every piece of the GFX i would sell them) otherwise everything else on both cars is for sale, and I will ship anything that I am able to at the buyers expense or could possible drive part way to meet a buyer, all parts are located in Jerome, MI 49249
Pictures are here http://smg.photobucket.com/albums/v2...ys/Part%20Out/
If you want pictures of a specific item let me know,
Thanks,
Codey
Pictures are here http://smg.photobucket.com/albums/v2...ys/Part%20Out/
If you want pictures of a specific item let me know,
Thanks,
Codey
Member

Joined: Oct 2004
Posts: 199
Likes: 2
From: Elkins W.V.a.
Car: 86 2wd
Engine: 305
Transmission: 700r4
Axle/Gears: 2:73 open (for now)
Re: Parting out 91 RS and 89 WS6
hey codey, what kind of shape are the tail lights in on the RS? any cracks/fading
pm me a number to call ya
pm me a number to call ya
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Member

Joined: Oct 2004
Posts: 199
Likes: 2
From: Elkins W.V.a.
Car: 86 2wd
Engine: 305
Transmission: 700r4
Axle/Gears: 2:73 open (for now)
Re: Parting out 91 RS and 89 WS6
If you do decide to sell the GFX, I need the front chin spoiler for my '92 RS, also teal. Or let me know how much all four would cost.
Last edited by CaysE; Apr 23, 2008 at 12:42 PM.
Joined: Jul 2002
Posts: 1,983
Likes: 6
From: Stamford, New York
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: Parting out 91 RS and 89 WS6
Do you have all 4 of the WS6 center wheel caps? Any fading or cracks in the faces/fixture?
Trending Topics
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
As of right now I am just going to keep the GFX unless someone wants the entire set sorry, and the WS6 center caps are going to stay with the rims/tires.
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
I will get both of you prices tomorrow including shippind I need to take its dimensions and see what it weighs, Reborn is first in line for the nose and then you Bufenator.
Thanks for the interest guys
Thanks for the interest guys
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: Parting out 91 RS and 89 WS6
looking for a hatch release switch, rear defrost switch, and cig. lighter. The yellow lettering must be on them andnot faded or chipped. LMK
Junior Member
Joined: Mar 2008
Posts: 83
Likes: 0
From: Gray, Maine
Car: 1984 Pontiac Trans Am
Engine: LS1 Zex Direct injected
Transmission: T-56
Axle/Gears: 4.88 Moser 9"
Re: Parting out 91 RS and 89 WS6
Do you have the bumper covers for the firebird? How much? Pictures to ls1_transam@hotmail.com. Thanks
Senior Member
iTrader: (2)
Joined: Jul 2007
Posts: 777
Likes: 4
From: Tampa/New Hampshire
Car: 91 camaro RS, 87 T/A
Engine: 350 TBI, 305 TPI
Transmission: 700r4
Axle/Gears: 4th Gen 3.42/BW 3.45
Re: Parting out 91 RS and 89 WS6
How much for the WS6 sway bars shipped to 03087.
Re: Parting out 91 RS and 89 WS6
how much for the camaro driver side quarter panel shipped to 93908. would be easier if you emailed me at thorpedo91@yahoo.com
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
how much for the camaro driver side quarter panel shipped to 93908. would be easier if you emailed me at thorpedo91@yahoo.com
Junior Member
Joined: Aug 2007
Posts: 45
Likes: 0
From: Swartz Creek, Michigan
Car: 1988 Pontiac Trans Am GTA
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: GM 9-Bolt
Re: Parting out 91 RS and 89 WS6
how nice are the fenders and rims on the formula? i could be able to pick the parts up to I outside of Flint
Joined: Jun 2005
Posts: 1,245
Likes: 8
From: Fairfield, CA
Car: 91camaro rs,2014 silverado 5.3L
Engine: 5.7Lcarb,5.3L
Transmission: 700-r4, 6L80
Axle/Gears: strange 3.73's
Re: Parting out 91 RS and 89 WS6
how much for both fron fenders on the camaro?
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
I would do $100 for the door, it has a brand new window motor in it, or make me an offer and we can probably work something out.
The dashpad is already sold and has been shipped out. Sorry.
The dashpad is already sold and has been shipped out. Sorry.
Member
iTrader: (1)
Joined: Jan 2006
Posts: 131
Likes: 0
From: VA
Car: 91 rs
Engine: 355 LT1
Transmission: 4L60E
Re: Parting out 91 RS and 89 WS6
Would you be willing to part with one of the Camaro's wheels? I'd be willing to buy one or two if they are 16x8 and in decent shape.
Member
iTrader: (1)
Joined: Mar 2008
Posts: 417
Likes: 26
From: Lady Lake, FL
Car: 1988 Camaro
Engine: LR4
Transmission: T5
Axle/Gears: 3.23posi/disc
Supreme Member
iTrader: (5)
Joined: Aug 2007
Posts: 1,525
Likes: 1
From: Milwaukee, Wisconsin
Car: 1987 IROC-Z
Engine: 383 with Edelbrock ProFlow EFI
Transmission: TH350
Axle/Gears: 12 bolt 3.73 Eaton posi
Re: Parting out 91 RS and 89 WS6
How much for the rear WS6 swaybar shipped to 53154?
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
For some reason I stopped receiving e-mail notifications :S, anyhow, don't really want to ship a door sorry, the wheels off the Camaro I am using on my 85, and the WS6 is pending sale.
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Re: Parting out 91 RS and 89 WS6
The firebird trade fell through so all parts on that are available again, also the camaros entire wiring harness is almost out if anyone would be interested in that, sorry for being late on the pms, have been quite busy lately.
Thanks for all the interest.
Thanks for all the interest.
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS
Thread Starter
Member
iTrader: (14)
Joined: Nov 2006
Posts: 206
Likes: 0
From: Jerome, Michian 49249
Car: 91 RS




