2 K&N Filters & Hooker Maxflow Muffler
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
2 K&N Filters & Hooker Maxflow Muffler
(2) K&N Filters pre-oiled for tpi intake mint condition.
-Part number 33-2008
-Pre-oiled, can clean if you want me to
-will include a used can of oil and cleaner, you pay shipping
-100 miles on recent clean/oil
$20 plus shippin
Hooker maximum flow muffler 21604 ($66plus shipping fromt summit)
-used maybe 50 miles
-flows the same as open 2.5" pipes
-very quiet performance muffler
-loud as open pipes @ WOT
-interior noise is almost absent
-very deep throaty sound
2.5" single in/single out offset in offset out.
$50 plus shipping
18" Glasspack w/ turndown
-used maybe 300 miles
-louder than the Maxflow
-deep rumble during cruise
$10 plus shipping
-Part number 33-2008
-Pre-oiled, can clean if you want me to
-will include a used can of oil and cleaner, you pay shipping
-100 miles on recent clean/oil
$20 plus shippin
Hooker maximum flow muffler 21604 ($66plus shipping fromt summit)
-used maybe 50 miles
-flows the same as open 2.5" pipes
-very quiet performance muffler
-loud as open pipes @ WOT
-interior noise is almost absent
-very deep throaty sound
2.5" single in/single out offset in offset out.
$50 plus shipping
18" Glasspack w/ turndown
-used maybe 300 miles
-louder than the Maxflow
-deep rumble during cruise
$10 plus shipping
Last edited by 86z28iroc-z; May 5, 2008 at 01:53 PM.
Senior Member
iTrader: (8)
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
any pics of the muffler?
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
It's just missing a little of the black paint around the inlet outlet area where the exhaust was clamped. I will also include 2 exhaust clamps with it if you want.




Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
Also here is a video of the Hooker Max flow.
First is a startup, next is a 25mph 3rd gear drive by, then a 25mph 2nd gear drive by, and then a little stab of the gas until the rear swayed out.
You need to listen with a subwoofer or higher quality headphones to hear the deepness of this muffler, standard laptop speakers can't recreate the lower frequencies very well.
First is a startup, next is a 25mph 3rd gear drive by, then a 25mph 2nd gear drive by, and then a little stab of the gas until the rear swayed out.
You need to listen with a subwoofer or higher quality headphones to hear the deepness of this muffler, standard laptop speakers can't recreate the lower frequencies very well.
Senior Member
iTrader: (8)
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
Do they make this muffler with dual outlets as well? if they do i will have to buy one new. I dont like the sound of my 80 series flowmaster much but i need a dual outlet. Nice car tho. Major props
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler

Let me know!
Senior Member
iTrader: (8)
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
i will ill let you know by this weekend, or next week when i get paid. I would love to match my hooker headers with this muffler and see how it sounds! the 80 is just to restrictive for me and ill look into a custom setup like that above.
Trending Topics
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
Bump for the weekend!
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
K&N's can go for $25 shipped.
Maxflow can go for $60 shipped.
Glasspack can go for $22 shipped.
Maxflow can go for $60 shipped.
Glasspack can go for $22 shipped.
Thread Starter
Member
iTrader: (1)
Joined: Sep 2006
Posts: 173
Likes: 0
From: North Dakota
Car: 86' Z28 Camaro
Engine: 357 TPI -- Dart Heads -- Voodoo Cam
Transmission: Built 700r4
Axle/Gears: 3.23 Posi
Re: 2 K&N Filters & Hooker Maxflow Muffler
K&N's sold
Mufflers still for sale!
Mufflers still for sale!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
88SS6SPEED
Engine/Drivetrain/Suspension Parts for Sale
7
Nov 11, 2015 07:05 AM
blackandblue02
Camaros for Sale
0
Sep 10, 2015 08:19 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM






