All prices include shipping and are negotiable but somewhat firm.
All of the engine parts and clutch have no run time, never started
lca's and panhard have maybe 1,000 miles
Weiand intake # 8024 - $160
MSD distributor # MSD8362 - $155
Holley dual inlet fuel line # HLY-34-150- $ $25
Holley f/p gauge #
Eiback Sportline springs, installed but never driven on, # EIB-4-0138 $220
Spohn Adjustable panhard bar # 104 Black powdercoat - $110
Spohn Adjustable lower control arms # 204 - $155
Spohn sfc's, (square style for t-top/hardtop, black powdercoat)never installed - $175
Flowmaster American thunder catback for dual cats with 2 new Magnaflow cats with 200 miles on them - $400 picked up or $50 delivered to the Sacramento area
Summit air cleaner with chrom and flow through top #'s SUM-239433 and SUM-239501 - $70
Serpentine setup with a/c delete pulley and a/c pump - $190
18" Centerline sundance lazer rims with 2 265/35/18's and 2 255/35/18's, tires are Falkin FK451's. Fronts are worn but rears are in good shape. A couple of the rims have minor rash but not bad. $650 picked up or $700 delivered to the Sacramento area.
Here's a pic of the rims


I also have a World class T5 setup with everything for the swap except for the torque arm mount. It has a brand new Centerforce Dual friction clutch, Centerforce throwout bearing and new gm clutch fork with 0 miles on them. The flywheel was resurfaced and it will come with ARP fastners.

All interior is black and in great shape, has kick panel boxes, make offer on any parts needed.

 

man I wish you were closer, those rims would be mine! good luck with all the sales.

 

got any pics of the panhard bar and lower control arm?

 

I will take them when I get home this afternoon. I will try to get pics of all the parts.

 

how much for the df clutch and bearing?

 

Sorry, I will have to get all pics tomorrow afternoon.

I would rather sell the clutch with the tranny but I will let you know if that changes.

 

what size are rims 18 X8 all the way around close ups please or emailed to godreject@msn.com thanks

 

Sorry, they're 18x9 all around. I will post some closups tomorrow.

 

Here are the lca's




I don't have any now of the panhard but will get one tomorrow for sure, I go in late so I will snap it in the morning.

 

Do you have pics of the Spohn SFCs? I am very interested in those.

 

also wanting pics of the sfc and the front and rear carpet. and a shipping qutoe for all of it to 68123. thanks.

 

 

I'm looking for the speedometer gear (the small one that the cable fastens to) for a T5.
Would you be interested in selling it?
Mine is a brown colour with 18 teeth.

 

What is the backspacing on the wheels?

 

what about the carpet? and both of the items shipped to 68123?

 

The carpet is in great shape, I think the front by the stomp pad might be a little worn, I have to look. I don't know what shipping will be as I would have to pull it out, box it, and weight it 1st.

I really don't know what the bs is on the wheels.

I also have Bilstein HD rear shocks with about 1,000 miles also, $125 shipped.

 

 

Bump

The serp setup is $150. It comes with a new waterpump, poawer steering pump, smog if needed, and alt.

 

So I take it that by ignoring my post you aren't interested in selling the speedo gear?
That's fine..I wouldn't buy it now if you were.

 

That's fine, I wasn't ignoring your post, I just missed it. Why would I pull the gear and sell it when I'm trying to sell the whole swap anyway? You can go to the dealer and buy them cheap.

 

Panhard bar sold

 

 

selling the pro 5.0 shifter by any chance?

 

Sorry, that was returned.

 

Lca's sold

 

Bump, I also have a tds wonderbar in the Raw Steel powder-coat finish for sale $50

 

Bump

 

 

Bump

 

are those wheels made to fit the 3rd gen or do you run spacers?

 

All the rims bolt up without spacers, however, the centercaps on the front wheels won't snp into place without an 1/8" spacer. I'm sure the back of the cap could be ground down but I didn't feel like doing it.

 

Sell the rearend Possibly if it is Disk? 9 bolt 10 bolt? Willing to sell?

 

It has a 10 bolt with pbr brakes, posi and 3.23's make an offer. I have another rear I can bolt up to it to haul away.

 

Bump

 

Still have the Intake, Distributor, and/or Air Cleaner? If so, pics please.

 

These are the only pics I have at the moment, I can get you seperate pics if you want.

 

Bump

 

Bump

 

Weiand intake # 8024 - $160
MSD distributor # MSD8362 - $155
Holley dual inlet fuel line # HLY-34-150- $ $25
Holley f/p gauge #
Eiback Sportline springs, installed but never driven on, # EIB-4-0138 $220
Spohn sfc's, (square style for t-top/hardtop, black powdercoat)never installed - $175
Flowmaster American thunder catback for dual cats with 2 new Magnaflow cats with 200 miles on them - $400 picked up or $50 delivered to the Sacramento area
Summit air cleaner with chrom and flow through top #'s SUM-239433 and SUM-239501 - $70
Serpentine setup with a/c delete pulley and a/c pump - $150
18" Centerline sundance lazer rims with 2 265/35/18's and 2 255/35/18's, tires are Falkin FK451's. Fronts are worn but rears are in good shape. A couple of the rims have minor rash but not bad. $650 picked up or $700 delivered to the Sacramento area.

I also have a World class T5 setup with everything for the swap except for the torque arm mount. It has a brand new Centerforce Dual friction clutch, Centerforce throwout bearing and new gm clutch fork with 0 miles on them. The flywheel was resurfaced and it will come with ARP fastners. $700 Will deliver to Sacramento and surrounding area for gas money.

All interior is black and in great shape, has kick panel boxes, make offer on any parts needed.

 

That looked like a really nice car. If I may ask, why are you parting it out?

 

I picked up an 02 Audi S4 and now I have 5 cars. I am sick of looking at this car sitting in the garage. I could use the cash for other things so this has to go. I would much rather sell the whole car and be done but it's hard to sell a non running project.

 

Bump, make offers.

 

PM sent

 

do you still have the air cleaner

 

Sorry, didn't notice any other replies. Yes, I still have the air cleaner.

 

Bump.

 

I am keeping the car and wheels but here is the stuff still for sale.

None of these parts have any run time.
Weiand intake # 8024 - $160
MSD distributor # MSD8362 - $155
Holley dual inlet fuel line # HLY-34-150- $ $25
Holley f/p gauge #
Summit air cleaner with chrom and flow through top #'s SUM-239433 and SUM-239501 - $70




I also have an extra leather t-top bag, make offer


Steering column with tilt, vats, cruize, $75obo

 

are the sfc weld on or bolt on?

 

Weld on but the only things left for sale are in my last post.

 

Bump