2055 headers,y pipe,and 3inch edelbrock exhaust
2055 headers,y pipe,and 3inch edelbrock exhaust
I have the 2055 super comp headers air tubes eliminated and welded,the y-pipe,and a 3inch edelbrock exhaust no cats and provisions for a electronic cut out.500 obo for everything may consider seperating.currently located in pensacola fl. pm me if interested
the headers are shown unpainted I painted them in high temp ceramic and baked them
the headers are shown unpainted I painted them in high temp ceramic and baked them
Last edited by dpayter; Mar 28, 2009 at 11:59 AM.
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
Junior Member
iTrader: (1)
Joined: Dec 2006
Posts: 50
Likes: 0
From: hagerstown,md
Car: 90 chevy camaro convertible iroc
Engine: 305 tpi
Transmission: 700r4 with hurst dual gate shifter
Axle/Gears: 3.73
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
is it all welded or does it seperate
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
it is all welded but I planned on cutting it at the welds if i was going to ship it and you could just have it rewelded it shouldnt cost you to much.It is seperated before the muffler though.
Trending Topics
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
Very interested.
Couple of questions.
What condition are the headers in? Are they ceramic coated?
Can I get a picture of the side of the car so i can get a better idea of the clearance?
Thanks
Couple of questions.
What condition are the headers in? Are they ceramic coated?
Can I get a picture of the side of the car so i can get a better idea of the clearance?
Thanks
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
sound clip for the exhaust http://s70.photobucket.com/albums/i9...t=IM000842.flv
Junior Member
iTrader: (2)
Joined: Dec 2008
Posts: 51
Likes: 0
Car: 87 GTA
Engine: 350
Transmission: Auto
Axle/Gears: 3.27
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
If all of it will work on a factory 87 GTA i might take it off your hands. I dont need the AIR stuff in delaware.
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
will you seperate? Im just looking for long tubes. pm me
Junior Member
Joined: Feb 2009
Posts: 48
Likes: 0
From: Glendale, Ky.
Car: 05 Pontiac Sunfire, 87 Z28
Engine: 2.2 Ecotec, 350 TPI
Transmission: Auto, 700r4 with shift kit
Axle/Gears: No clue, limited slip.
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
PM Sent.
Junior Member
Joined: Feb 2009
Posts: 48
Likes: 0
From: Glendale, Ky.
Car: 05 Pontiac Sunfire, 87 Z28
Engine: 2.2 Ecotec, 350 TPI
Transmission: Auto, 700r4 with shift kit
Axle/Gears: No clue, limited slip.
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
Think im going to hold off for now. as everyone on here knows the economy sucks at the moment and cash is hard to come by. Sorry about the wait on the reply.
Want a title? Post!
Joined: Apr 2007
Posts: 0
Likes: 0
From: Las Vegas
Car: 87 firebird
Engine: mystery 350
Transmission: 700-r4
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
interested, wondering if they will fit 350 4bbl. don't know if exhaust ports will match up?
Re: 2055 headers,y pipe,and 3inch edelbrock exhaust
yes It will fit a 350 4bbl.it will fit any motor other than the v6 that came with our cars if you want you can go to summitracing.com and check the fitment for it. it says tpi motors on the fitment but thats because of the air tubes and those have been removed.
Last edited by dpayter; Apr 22, 2009 at 06:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
6
Sep 8, 2015 03:38 PM
downsouthboy
Tech / General Engine
4
Aug 29, 2015 11:29 AM
