parting out 1988 gta--5.7tpi car
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
parting out 1988 gta--5.7tpi car
parting whole car. lots of good stuff
Joined: Dec 2002
Posts: 331
Likes: 3
From: Peterborough, Ontario
Car: 1989 Camaro RS
Engine: 1990 - 5.7
Transmission: Tremec 3550
Axle/Gears: 9 Bolt - 3:45
Re: parting out 1988 gta--5.7tpi car
I'm guessing a 10 bolt rear? I'm looking for a 9 so I just thought I'd ask.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Senior Member
iTrader: (10)
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: parting out 1988 gta--5.7tpi car
$30 for plenum and runners.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Member
Joined: Aug 2006
Posts: 147
Likes: 0
From: Duncan, Ok.
Car: 86 Trans Am
Engine: 305
Transmission: T5
Re: parting out 1988 gta--5.7tpi car
how about the front turn signals? You know, the ones under the hood next to the lights. Mine broke at the screw holes.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
Last edited by sikZ28; Apr 18, 2009 at 05:44 PM.
Trending Topics
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: parting out 1988 gta--5.7tpi car
i do have the turn signals. no damage. $30 shipped
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: parting out 1988 gta--5.7tpi car
here are some pics
how about the front turn signals? You know, the ones under the hood next to the lights. Mine broke at the screw holes.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Re: parting out 1988 gta--5.7tpi car
some more pics
how about the front turn signals? You know, the ones under the hood next to the lights. Mine broke at the screw holes.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
If they are good/unbroke how about a price for both shipped to 73533.
Oh, and the console lid.
And dash pad if it is unbroke/cracked.
EDIT:
Crap, I just seen that this was in the engine/drive train section. Sorry.
Oh well, if you got the stuff and there black I'm interested.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Member
iTrader: (5)
Joined: Mar 2005
Posts: 263
Likes: 0
From: Displaced Texan living in NC
Car: 1988 Pontiac Firebird Trans AM GTA
Engine: Tune-port Injected 6.3L
Transmission: Borg-Warner T56 six-speed
Axle/Gears: Borg/Warner 9-bolt with 3.70:1
Re: parting out 1988 gta--5.7tpi car
How much for both headlight pods with motors shipped to 28390? Do the motors work? Are lens housings rusted (where the bulbs sit)? Do they have all of the adjuster screws and are the intact? Thanks.
Member
Joined: Jul 2007
Posts: 149
Likes: 0
From: Lisle Illinois
Car: 95 SHO. 87 IROC red 69 Vette blue
Engine: 3.0 Yamahammer.5.7 TPI L98, 350
Transmission: mtx4 ,700r4, 4speed,
Axle/Gears: 3.27, 3.73
Re: parting out 1988 gta--5.7tpi car
I'll give ya 5 bucks for the fan switch pigtail connector and as much wire you can get off it, if its in good shape and not all melted
Member
Joined: Aug 2006
Posts: 147
Likes: 0
From: Duncan, Ok.
Car: 86 Trans Am
Engine: 305
Transmission: T5
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Senior Member
iTrader: (1)
Joined: Jul 2007
Posts: 1,141
Likes: 2
From: MA
Car: '87 IROC/'68 SS
Engine: 5.7L/350
Transmission: 700R4/Muncie 4-spd
Axle/Gears: 3.27 9 bolt / 3.31 12 bolt
Member
iTrader: (5)
Joined: Mar 2005
Posts: 263
Likes: 0
From: Displaced Texan living in NC
Car: 1988 Pontiac Firebird Trans AM GTA
Engine: Tune-port Injected 6.3L
Transmission: Borg-Warner T56 six-speed
Axle/Gears: Borg/Warner 9-bolt with 3.70:1
Re: parting out 1988 gta--5.7tpi car
INSTEAD, you asked a question to me, that you'd have known, if you had just READ my post, or my PM.
doesnt matter much anyways, i got a new set of tfs heads.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Member
Joined: Jan 2009
Posts: 104
Likes: 0
From: Fort Wayne, IN
Car: 1989 Camaro IROC-Z28
Engine: Rebuilt 350TPI (see sig)
Transmission: is being replaced...
Axle/Gears: 20 year old G92 Borg-Warner 3.45
Re: parting out 1988 gta--5.7tpi car
I know you said you sold the motor but do you have the ESC module still?
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Member
Joined: Jan 2009
Posts: 104
Likes: 0
From: Fort Wayne, IN
Car: 1989 Camaro IROC-Z28
Engine: Rebuilt 350TPI (see sig)
Transmission: is being replaced...
Axle/Gears: 20 year old G92 Borg-Warner 3.45
Re: parting out 1988 gta--5.7tpi car
No its not the computer its the electronic spark control module which is why i was curious some people may take it some might not cuz its not directly related to the motor... it is usually on the firewall here is a picture of one
Re: parting out 1988 gta--5.7tpi car
I need the backing plates off of the 9 bolt if they are for disc brakes and are in great shape. The last set I bought were rusted thru. I am in CT. If the rear is in good shape with 3.23 gears I might just take the whole thing.Let me know.
Member
Joined: Aug 2006
Posts: 147
Likes: 0
From: Duncan, Ok.
Car: 86 Trans Am
Engine: 305
Transmission: T5
Re: parting out 1988 gta--5.7tpi car
I just received my turn signals, I am happy with them.
I would recomend buying parts from 89irocz355 any time.
Good price, good communication and I received them in a timely manner.
I would recomend buying parts from 89irocz355 any time.
Good price, good communication and I received them in a timely manner.
Member
iTrader: (5)
Joined: Mar 2005
Posts: 263
Likes: 0
From: Displaced Texan living in NC
Car: 1988 Pontiac Firebird Trans AM GTA
Engine: Tune-port Injected 6.3L
Transmission: Borg-Warner T56 six-speed
Axle/Gears: Borg/Warner 9-bolt with 3.70:1
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Joined: Nov 2008
Posts: 476
Likes: 24
From: IL
Car: 91 TA / 91 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 3.42
Re: parting out 1988 gta--5.7tpi car
I am looking for the font wire harness for the front turn signals and fog lights. shipped to 62703.
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91
Senior Member
iTrader: (3)
Joined: Feb 2007
Posts: 659
Likes: 0
From: Tucson, Az
Car: Don't
Engine: have
Transmission: it
Axle/Gears: anymore
Re: parting out 1988 gta--5.7tpi car
Do you have a positive battery cable with the 1-pin connector and alternator ground in good condition?
Thread Starter
Senior Member
iTrader: (103)
Joined: Apr 2005
Posts: 576
Likes: 5
From: townsend, mass.
Car: 89 iroc/90 iroc conv./06 ram
Engine: 350
Transmission: 700r4
Axle/Gears: 3.27/3.27/3.91









