[WI] sold
01-18-2010, 06:22 PM
#1
Banned
Thread Starter
iTrader: (10)
Join Date: Jan 2003
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
sold
i have a short block pulled out of a 92 camaro.
2 bolt block, rolller cam motor,has only 70k miles.
comes with:block, crank, rods, pistons, cam, timming chain w/ cover & oil pan.
all is stock!
looking to make room!
$350.00
PICK UP OR SHIPPING IS FINE, BUT THE BUYERLOOKS UP & PAYS ALL SHIPPING COST FROM ZIP CODE 53095
here are some pix, pm me if you need any others.
please feel free to contact me by phone.
Dan 262 483 9689
2 bolt block, rolller cam motor,has only 70k miles.
comes with:block, crank, rods, pistons, cam, timming chain w/ cover & oil pan.
all is stock!
looking to make room!
$350.00
PICK UP OR SHIPPING IS FINE, BUT THE BUYERLOOKS UP & PAYS ALL SHIPPING COST FROM ZIP CODE 53095
here are some pix, pm me if you need any others.
please feel free to contact me by phone.
Dan 262 483 9689
Last edited by smallblockking; 02-02-2010 at 01:59 AM.
01-21-2010, 11:24 AM
#4
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: 1992 l-98 350 roller short block $400.00
I know this doesnt have anything to do with the motor but i was wondering if you had and extra one of those spider plates for the lifters with the bolts for sale. Thanks
01-23-2010, 10:46 AM
#5
Banned
Thread Starter
iTrader: (10)
Join Date: Jan 2003
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1992 l-98 350 roller short block $400.00
bump! also have just a bare block with: oil pan,timing cover,1 piece seal adpt; and lifter spider & lifter retainers.
standard bore. $150.00 firm for bare block!
PM ME ONLY
!
standard bore. $150.00 firm for bare block!
PM ME ONLY
! Trending Topics
01-26-2010, 08:15 PM
#8
Senior Member
iTrader: (5)
Join Date: Dec 2006
Location: Augusta, Ga
Posts: 2,212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
Re: 1992 l-98 350 roller short block $400.00
too bad you're not closer...Bump for a good deal!
01-27-2010, 02:15 PM
#10
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: 92' L-98 350 short block complete $400.00
Well, if that's the case, I'll come pick the shortblock up on Sunday for $50. That's more than you'll get in scrap. LMK
01-27-2010, 03:11 PM
#11
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: 92' L-98 350 short block complete $400.00
I'll double that offer and pick up for $100. If it had heads on it, I would have bought the engine when he first posted it.
01-27-2010, 09:49 PM
#13
Supreme Member
Re: 92' L-98 350 short block complete $400.00
You put that on craigslist? That should sell quick I'd think. $400 is a great price.
01-28-2010, 07:03 AM
#15
Junior Member
Join Date: Dec 2009
Location: Stuttgart Germany
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 z28
Engine: 355/Edelbrock Heads/Pro-Flo Inj
Transmission: Monster 700r4(500hp)9.5" 2800 stall
Axle/Gears: 10 Bolt with 3.23 posi
Re: 92' L-98 350 short block complete $400.00
wish i was in america and not on this german army base.....seperated
01-28-2010, 06:46 PM
#17
Junior Member
Join Date: Mar 2009
Location: North Vernon, Indiana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92' L-98 350 short block complete $400.00
I'm actually looking for one of these, but I live in Indiana...I'd only have 200 bucks to offer though since it has no heads and valve train.
01-29-2010, 06:32 AM
#19
Junior Member
Join Date: Mar 2009
Location: North Vernon, Indiana
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92' L-98 350 short block complete $400.00
01-29-2010, 07:39 AM
#20
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: (delete)92' L-98 350 short block complete $400.00
Don't sweat it montecarlossman, I didn't see anything in his post that said he had the heads, if it did, I would've already figured out a way to get to Wisconsin. In non of his posts does he say he has the heads and valvetrain, in his original post, it says "short block" and we know what a short block is.
BUMP! 
02-09-2010, 05:39 PM
#36
TGO Supporter
Join Date: Nov 2002
Location: Puerto Rico
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC Convertible
Engine: 305 TPI
Transmission: Auto
Re: 92' L-98 350 short block complete $350
WATCH OUT FOR THIS GUY!! He ripped me off!!! He quoted me a price for an item and then almost doubled it AFTER I sent him money when he saw shipping to me was expensive. I offered for him to keep $10 for his trouble and give me a refund and he refused. I attempted several times to convince him but he now just ignores me. I have documentation consisting of PM’s and email’s and will gladly post it if anyone needs proof.
02-09-2010, 07:42 PM
#37
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: 92' L-98 350 short block complete $350
I'm not saying that I don't believe you, but that is a hefty claim to make. A little proof would be helpful if you are going to say something like this openly. Also, I would buy in person, no shipping so there wouldn't be problems, but for a stock short block, or he says long block but in his original post he says nothing of heads, but anyways, for $350, plus the gas I'd use in my truck to go there and come back, I'd be better off getting an engine from the local boneyard, from intake to oil pan.
With all do respect galletti, to be fair to the OP, it would be good for you to prove your claim. This could go either way, it is your word against his. Sorry, but right now it looks like you are badgering him, I could be wrong, but I'm just saying what it looks like.
With all do respect galletti, to be fair to the OP, it would be good for you to prove your claim. This could go either way, it is your word against his. Sorry, but right now it looks like you are badgering him, I could be wrong, but I'm just saying what it looks like.
02-09-2010, 08:03 PM
#38
TGO Supporter
Join Date: Nov 2002
Location: Puerto Rico
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC Convertible
Engine: 305 TPI
Transmission: Auto
Re: 92' L-98 350 short block complete $350
No problem. Please try to follow the line of messages. It is quite long and taken from this board's IM and our emails. Any questions, feel free to contact me.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
02-09-2010, 08:07 PM
#39
TGO Supporter
Join Date: Nov 2002
Location: Puerto Rico
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC Convertible
Engine: 305 TPI
Transmission: Auto
Re: 92' L-98 350 short block complete $350
No problem. I'm posting the messages between us. It's a little difficult to follow but, it boils down to this:
1. He posted the part in the classifieds for $50 shipped.
2. When I asked him about it he said $90 shipped.
3. He went back to the posted price when I challenged him on it.
4. I sent the money.
5. He then found out that shipping to me was actually more expensive so he asks for $120 shipped (more than twice the price)
6. I decide that's too expensive for me so, to be nice, I tell him to keep $10 and refund the rest.
7. He refused and then it deteriorated from there.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
1. He posted the part in the classifieds for $50 shipped.
2. When I asked him about it he said $90 shipped.
3. He went back to the posted price when I challenged him on it.
4. I sent the money.
5. He then found out that shipping to me was actually more expensive so he asks for $120 shipped (more than twice the price)
6. I decide that's too expensive for me so, to be nice, I tell him to keep $10 and refund the rest.
7. He refused and then it deteriorated from there.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
02-09-2010, 08:08 PM
#40
TGO Supporter
Join Date: Nov 2002
Location: Puerto Rico
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC Convertible
Engine: 305 TPI
Transmission: Auto
Re: 92' L-98 350 short block complete $350
No problem. I'm posting the messages between us. It's a little difficult to follow but, it boils down to this:
1. He posted the part in the classifieds for $50 shipped.
2. When I asked him about it he said $90 shipped.
3. He went back to the posted price when I challenged him on it.
4. I sent the money.
5. He then found out that shipping to me was actually more expensive so he asks for $120 shipped (more than twice the price)
6. I decide that's too expensive for me so, to be nice, I tell him to keep $10 and refund the rest.
7. He refused and then it deteriorated from there.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
1. He posted the part in the classifieds for $50 shipped.
2. When I asked him about it he said $90 shipped.
3. He went back to the posted price when I challenged him on it.
4. I sent the money.
5. He then found out that shipping to me was actually more expensive so he asks for $120 shipped (more than twice the price)
6. I decide that's too expensive for me so, to be nice, I tell him to keep $10 and refund the rest.
7. He refused and then it deteriorated from there.
11-04-2009 Re: TPI intake
04:17 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
11-04-2009 Re: TPI intake
04:31 PM
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
if you paypal me today yet, i can get it shipped out for you!
thanks
dan
11-04-2009 Re: TPI intake
08:04 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
Quote:
Originally Posted by smallblockking
Quote:
Originally Posted by galletti
Interested. Will Paypal if you agree. Ship via USPS please, zip code 00926.
i do take paypal. address is: danziroc383@yahoo.com
with shipping total will be $90.00 with paypal fee.
thanks
dan
Does that include the rails and injectors? Because you had the intake posted for $50 shipped.
no, just the intake. do you need everything. i have the rail, injsctors, regulator (stock) misc fittings and most hardware. i'd sell it all for $125 shipped!! + paypal fee of 4%
let me know asap, i'm ready to box it up for good!.
11-04-2009 Re: TPI intake
08:16 PM smallblockking
No, I only need the lower intake. I'm just wondering how it went from being posted for $50 shipped to $90 shipped.
it's my mistake. it's your location that makes it more. i can do it for $60 shipped +4% paypal fee
11-04-2009 Re: TPI intake
10:59 PM smallblockking
Re: TPI intake
Quote:
Originally Posted by galletti
$62.00 sent!!!
great! i will get it sent out first thing on thursday.
thanks
dan
11-06-2009 Re: TPI intake
05:06 PM smallblockking
we have a problem, shipping to you is WAY TOO MUCH!!!
CHEAPEST IS $125.00
let me know what you wan to do.
11-06-2009 Re: TPI intake
05:17 PM smallblockking
What method are you using? USPS freight should be not too bad.
usps, ups and fedex are all within $2-$3 difference
So I emailed him and asked for a refund. I was nice enough to offer he keep $10 but he wound up ripping me off anyway.
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Refund for TPI intake
To: danziroc383@yahoo.com
Date: Monday, November 16, 2009, 12:13 PM
I tried to contact you via PM but it's been 11 days since I told you you could keep $10 of the $62 I sent for the TPI base because of the shipping cost issue. I haven't heard from you and I know you've been online because you keep posting. Check you PM's and send me a refund.
On Nov 16, 2009, at 2:28 PM, "danziroc383@yahoo.com" <danziroc383@yahoo.com> wrote:
sorry, i don't give refunds! i'm waitting on the rest of the shipping money. i already turned down other buyers because you sent money to me 1st.
so, i'll wait for the rest of the shipping money!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:08 PM
I sent you the amount YOU asked for! Then you double it because you were irresponsible enough to quote a price without first checking! I'm being nice enough to offer you to keep something for your troue even though this whole mess is your fault! You have until tomorrow to comply.
On Mon, Nov 16, 2009 at 3:15 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
or else what? don't start no **** with me here! i'm just telling it like it is!
--- On Mon, 11/16/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Monday, November 16, 2009, 1:31 PM
No need for the language. Well if that's "like it is", you need to review your version of the facts. YOU gave me a quote which I promptly paid. In fact, I sent you more that $60 + the 3% you asked for. You then doubled the price on me and you expect me to just sent you MORE money. I told you MINUTES after you asked for more money that it was a no go. If you didn't bother to read your messages and miraculously turned down some buyer in that time frame, it's still your fault for misquoting your price. Trust me when I say it's gonna cost you more in sales that the $52.00 I'm asking for. I'm trying to be civil about this and letting you keep something for your trouble. This is a last chance. Think about it.
On Mon, Nov 16, 2009 at 10:29 PM, danziroc383@yahoo.com <danziroc383@yahoo.com> wrote:
why don't you just end me the rest of the money for shipping?
--- On Tue, 11/17/09, Marcos Galletti <galletti1@gmail.com> wrote:
From: Marcos Galletti <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
To: "danziroc383@yahoo.com" <danziroc383@yahoo.com>
Date: Tuesday, November 17, 2009, 7:01 PM
So how about it?
On Mon, Nov 16, 2009 at 11:39 PM, Marcos Galletti <galletti1@gmail.com> wrote:
I really wish I could. The part was a great deal at $50 shipped. I was willing to pay the $60+ you asked for because it was still a great deal considering I just want this part as a spare to try my hand at porting. But when the price went up so much because of the shipping it just went totally above budget for this project. I don't think I'm being unreasonable and I'm sure you'll get rid of that part elsewhere very easily. It looks like a win/win situation here.
From: danziroc383@yahoo.com
Subject: Re: Refund for TPI intake
Date: November 17, 2009 9:09:20 PM AST
To: Galletti Marcos <galletti1@gmail.com>
i will let you know tomorrow! trying to see i can ship it through my friends shop.
i'll let you know either way.
That was the last I heard from this guy so I tried yet again:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 17, 2010 8:06:56 AM AST
To: danziroc383@yahoo.com
So...did you finally decide just to steal my money?
NO ANSWER and then:
From: Galletti Marcos <galletti1@gmail.com>
Subject: Re: Refund for TPI intake
Date: January 22, 2010 4:23:12 PM AST
To: danziroc383@yahoo.com
Ok then. Since you chose to steal from me and now are ignoring me, I have no choice but to take action. Rest assured that EVERY item you list for sale at thirdgen .org will be followed by a reply from me with details as to how you ripped me off. It will include copies of all our communication. Remember, you stated a price which I paid and then you practically doubled the price on me. It's your lack of attention and your mistake having quoted me the wrong price. I refuse to pay for YOUR mistake and have no other option than to expose you as the thief you are. If the funds are not back in my account by the end of the weekend I will take the above mentioned measures.
02-09-2010, 10:50 PM
#44
Senior Member
iTrader: (5)
Join Date: Dec 2006
Location: Augusta, Ga
Posts: 2,212
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
Engine: 355ci L98 soon to be turbo'd
Transmission: 700R4
Axle/Gears: 2.73 posi
Re: 92' L-98 350 short block complete $350
sorry to hear about the situation for both of you. Hopefully it'll get resolved...
02-10-2010, 07:49 AM
#46
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: 92' L-98 350 short block complete $350
Wow, that sounds bad, sorry to hear about that. I've gotten ripped off before on this site and that is why I go to pick up every part that I buy. I did live in Puerto Rico for a while and I know how hard it is to get parts, sorry for the trouble that this has caused you. Check your PM's when you get a chance.
02-10-2010, 08:00 AM
#48
Senior Member
Join Date: Jul 2007
Location: Elk Grove Village
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: Firechicken
Engine: 350 + 30 over, 400 crank
Transmission: autotragic, stalled
Axle/Gears: not a one tire fire, thank god!
Re: 92' L-98 350 short block complete $350
PM me back when you have time.
I have waited to buy the short block till I hear what smallblockking has to say. I think he should be given a fair chance to speak and say his side of the story.
I have waited to buy the short block till I hear what smallblockking has to say. I think he should be given a fair chance to speak and say his side of the story.
