[KS] 89 GTA partout

Thread Tools
 
Search this Thread
 
Old Aug 1, 2010 | 10:39 PM
  #1  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
89 GTA partout

Parting out 89 GTA with tan interior. Some things I have duplicates of from another car. If you would like a detailed photo please ask, as I have piles of parts around here. I have much more from this specific car than what is shown, but this is all I had time to pull off today. I have all dash panels (except cover), and the console as well. As far as mechanical parts there is some left; please feel free to ask. Taking offers:
(Door panels pictured sold)


Last edited by thewizard; Nov 19, 2010 at 04:42 PM.
Reply
Old Aug 2, 2010 | 07:17 AM
  #2  
kitt23's Avatar
Member
iTrader: (4)
 
Joined: May 2010
Posts: 196
Likes: 2
Re: 89 GTA partout

you have more photos of tan plastics?
Reply
Old Aug 2, 2010 | 08:56 AM
  #3  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Which ones are you specifically interested in?
Reply
Old Aug 2, 2010 | 09:00 AM
  #4  
kitt23's Avatar
Member
iTrader: (4)
 
Joined: May 2010
Posts: 196
Likes: 2
Re: 89 GTA partout

well do you have all of the tan plastics at all?
Reply
Old Aug 2, 2010 | 12:21 PM
  #5  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

This car was hit in the rear, so the ones in the back are broken except for the right side. It also appears that the plastics that aren't broken got sprayed by a can of black spray paint that ruptured in the wreck. In other words I don't have the complete set. If somebody wanted them for reconditioning purposes I'd just ask $5 + shipping each to cover my time and gas to the post office and shipping materials/time.

Last edited by thewizard; Aug 5, 2010 at 09:53 PM.
Reply
Old Aug 2, 2010 | 11:47 PM
  #6  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Got some more apart today. Got some other stuff dug out too:



The cluster panels are identical and I have all switches as well. Price depends upon number of swiches included unless a bare panel is desired which I'm asking $35 shipped (ea) OBO.

The remaining cluster is in great shape other than minimal spots on the clear cover. It is from an 87 GTA (350), $50 shipped.
The stereo plate has a random switch in it and a cigarette burn on the bottom, but is excellent otherwise. $10 shipped

The two lower passenger dash panels have the Performance Suspension emblem and are in excellent shape. $20 shipped (ea)

Also, a PS speaker cover for the dash. $5 shipped or I'll toss it in if you buy anything else from this thread.

I'm working on getting a couple more parts for this thread and am brainstorming more prices, but feel free to throw out offers.
Thanks.

Last edited by thewizard; Nov 19, 2010 at 04:44 PM. Reason: one cluster sold
Reply
Old Aug 5, 2010 | 02:06 PM
  #7  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

.

Last edited by thewizard; Oct 13, 2010 at 06:14 PM. Reason: parts sold
Reply
Old Aug 5, 2010 | 09:48 PM
  #8  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

I have one lower cushion left. $20 + shipping.


Very nice set of 4th Gen seats. No tears/rips/etc. A good clean up and they'll be like new. $40 picked up. Will ship if desired.



Two Performance Suspension labeled lower PS panels, two sets of hardtop A&B pillar trim. Feel free to make offers on multiple parts or whatever you are inclined to do. I of course have tons of fasteners if you need them. Any of the relays/modules/chime boxes I have two of. Thanks for looking.


Last edited by thewizard; Jun 14, 2011 at 08:20 AM. Reason: parts sold
Reply
Old Aug 12, 2010 | 09:19 PM
  #9  
M&M_GTA88's Avatar
Member
iTrader: (2)
 
Joined: Dec 2004
Posts: 115
Likes: 0
From: Kennett Square, PA
Car: 1988 GTA
Engine: 383 Stroker L98 TPI
Transmission: 700 R4 w/ B&M Shift Kit
Axle/Gears: Stock BW LS 9 Bolt with 3.27 gears
Re: 89 GTA partout

How much for the cargo cover shipped to 19348?
Reply
Old Aug 12, 2010 | 10:10 PM
  #10  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

$35 shipped in the lower 48 for the black vinyl cargo cover.
Reply
Old Aug 15, 2010 | 09:02 AM
  #11  
M&M_GTA88's Avatar
Member
iTrader: (2)
 
Joined: Dec 2004
Posts: 115
Likes: 0
From: Kennett Square, PA
Car: 1988 GTA
Engine: 383 Stroker L98 TPI
Transmission: 700 R4 w/ B&M Shift Kit
Axle/Gears: Stock BW LS 9 Bolt with 3.27 gears
Re: 89 GTA partout

I'll take the vinyl cargo cover for $35 to 19348. send me a pm with your email address so I can send a pay pal your way.
Reply
Old Aug 17, 2010 | 07:28 PM
  #12  
gta90's Avatar
Member
15 Year Member
Liked
iTrader: (1)
 
Joined: May 2008
Posts: 127
Likes: 1
From: Southwest
Car: 1990 GTA (T-Top)
Engine: 305 TPI (LB9) / 115k miles
Transmission: 4L60 (MD8 non-E)
Axle/Gears: 2.73 (GU2) 28 spline POSI (G80)
Re: 89 GTA partout

how much for the plastic trim strip that runs along the driver's door? Is it in good condition?

Got any of the rear plastic screws, in good condition?

How about the shifter indicator lens (or entire plastic assembly)? I need it for a 4 speed auto (1990 GTA)

Thanks!
Reply
Old Aug 17, 2010 | 08:52 PM
  #13  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: 89 GTA partout

Looking for an unused alum spare (black paint) with air can. P195/75-D15.

JamesC
Reply
Old Aug 18, 2010 | 07:35 PM
  #14  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Info sent to M&M; sale pending on black cargo cover.

I'll check on those items tomorrow evening James and 90GTA.
Reply
Old Aug 19, 2010 | 06:20 PM
  #15  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,498
Likes: 193
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 89 GTA partout

Originally Posted by JamesC
Looking for an unused alum spare (black paint) with air can. P195/75-D15.

JamesC
If he doesn't come through, I have one without the air can. Shoot me a PM if you are interested.
Reply
Old Aug 19, 2010 | 06:25 PM
  #16  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,498
Likes: 193
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 89 GTA partout

What are you asking for the remaining cargo cover shipped to 93245? Does it extend and retract properly?
Reply
Old Aug 19, 2010 | 08:38 PM
  #17  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

...

Last edited by thewizard; Jun 14, 2011 at 08:20 AM. Reason: parts sold
Reply
Old Aug 19, 2010 | 11:04 PM
  #18  
gta90's Avatar
Member
15 Year Member
Liked
iTrader: (1)
 
Joined: May 2008
Posts: 127
Likes: 1
From: Southwest
Car: 1990 GTA (T-Top)
Engine: 305 TPI (LB9) / 115k miles
Transmission: 4L60 (MD8 non-E)
Axle/Gears: 2.73 (GU2) 28 spline POSI (G80)
Re: 89 GTA partout

Cool, I'd be interested in the driver's side plastic door/sill trim strip. No cracks, right? See pic to make sure we are talking about the same piece (just driver's side). Also, I'll take the lens piece. I've attached a pic of mine. I'd prefer to replace what I have in the picture only. Hopefully yours is in better shape than mine. How much for the deuce?

Also.... do you still have the hatch bolt plastic cover/caps? I'll take both of those if they are in good condition. Please check on the tan plastic screws. Hopefully you have at least 3.

Thanks
Attached Thumbnails 89 GTA partout-img_20100819_213408.jpg   89 GTA partout-user96133_pic15998_1281062615.jpg  
Reply
Old Aug 19, 2010 | 11:13 PM
  #19  
juanillox8's Avatar
Senior Member
iTrader: (7)
 
Joined: Feb 2010
Posts: 820
Likes: 1
From: OX CA
Car: TOO MANY
Engine: 350 TPI / 350 TBI/6.0L VORTEC
Transmission: T5/AUTO/AUTO
Re: 89 GTA partout

do u have the vss buffer with harness?
Reply
Old Aug 20, 2010 | 02:46 PM
  #20  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

gta90: the shifter part I have is good; $20 shipped in the lower 48? I have a DS sill.

juanillox8: Do you have a picture of what you need?

Last edited by thewizard; Aug 23, 2010 at 06:34 PM.
Reply
Old Aug 20, 2010 | 07:50 PM
  #21  
wqcode's Avatar
Junior Member
15 Year Member
 
Joined: Feb 2008
Posts: 7
Likes: 0
Re: 89 GTA partout

Do u have the antenna lead wire from the radio to a power antenna ? If so I well take the dash speacker cover as well shipped to 52101.
Reply
Old Aug 21, 2010 | 12:12 AM
  #22  
juanillox8's Avatar
Senior Member
iTrader: (7)
 
Joined: Feb 2010
Posts: 820
Likes: 1
From: OX CA
Car: TOO MANY
Engine: 350 TPI / 350 TBI/6.0L VORTEC
Transmission: T5/AUTO/AUTO
Re: 89 GTA partout

Originally Posted by thewizard
juanillox8: Do you have a picture of what you need?
is the yellow box
Attached Thumbnails 89 GTA partout-131994d1168814207-vss-buffer-needed  
Reply
Old Aug 21, 2010 | 04:01 AM
  #23  
nhra-trans-am's Avatar
Member
iTrader: (7)
 
Joined: Jan 2010
Posts: 229
Likes: 7
From: Orange County, CA
Re: 89 GTA partout

Did the car have a power antenna?
Also need the part where the driver's seatbelt clicks into and a ttop headliner if you have them.
Reply
Old Aug 21, 2010 | 08:48 PM
  #24  
kato89GTA's Avatar
Junior Member
15 Year Member
 
Joined: Apr 2010
Posts: 15
Likes: 7
Car: 1989 Trans AM GTA
Re: 89 GTA partout

Do you have the steering column with the radio control steering wheel? If so, how much do you want for it to include shipping to 78108? Also, if you do have one I will send you my email address so u can send me some pics of it.

Thanks

Rick
Reply
Old Aug 21, 2010 | 10:23 PM
  #25  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,498
Likes: 193
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 89 GTA partout

Originally Posted by thewizard
One cargo cover...cloth and faded to blue where the sun beat down on it.
What are you asking for the faded cargo cover shipped to 93245?
Reply
Old Aug 23, 2010 | 06:30 PM
  #26  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

I have two of the VSS boxes: $20 shipped each
Let me know how much harness you need.

The DS door sill is sold.

The power antenna lead is all there, but needs a new connector spliced on the end where it goes into the radio. $15 shipped

The power antenna probably doesn't work and the mast is a little bent. Best offer.

I have one if those steering wheels and the control panel for it. Check a couple posts down for a picture. $45 shipped

The seat belt receivers have broken covers, and no headliners. Sorry.



Last edited by thewizard; Jun 14, 2011 at 08:21 AM.
Reply
Old Aug 23, 2010 | 06:39 PM
  #27  
fa2401's Avatar
Junior Member
 
Joined: Apr 2009
Posts: 1
Likes: 0
From: Ft.Lauderdale
Car: 83 trans am
Engine: 350 sbc
Transmission: 700 r4
Re: 89 GTA partout

Do you have a digital cluster for a gta?
Reply
Old Aug 23, 2010 | 08:43 PM
  #28  
blacksunshine'91's Avatar
Supreme Member
25 Year Member
iTrader: (10)
 
Joined: Sep 2000
Posts: 2,498
Likes: 193
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 89 GTA partout

Originally Posted by thewizard
$25 shipped on the cargo cover.
Does it still open and retract correctly?
Reply
Old Aug 26, 2010 | 01:06 PM
  #29  
1989karr's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2005
Posts: 2,508
Likes: 201
From: Hawaii
Car: 89' Firebird / 87' Formula
Engine: 3.4 / 5.0
Transmission: 700-R4
Axle/Gears: 3.42 / 3.42
Re: 89 GTA partout

are those 120 or 140 MPH speedometers? f so whats the mileage on them? And do the odometers / trip odometers work? Thanks!
Reply
Old Aug 26, 2010 | 07:57 PM
  #30  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

The cargo cover retracts slow, but would be fine with a little attention.

No digital clusters unfortunately.

Clusters sold.


Taking offers on anything and everything. Feel free to PM me.

Thanks for looking.

Last edited by thewizard; Jun 14, 2011 at 08:21 AM.
Reply
Old Aug 26, 2010 | 10:17 PM
  #31  
KrisW's Avatar
Supreme Member
20 Year Member
iTrader: (6)
 
Joined: Sep 2004
Posts: 2,777
Likes: 7
From: Casselberry, FLA
Car: 88 V6 'bird/89TBI bird/85 T/A
Engine: 2.8/TBI/TPI
Transmission: V8 T-5/700R4 x2
Axle/Gears: 3.42 open/2.73 open/ 3.27 9 bolt
Re: 89 GTA partout

Do you have the actual shifter? Not the plastics around it, but the shift handle with the button? If so, how much shipped to 33809?
Reply
Old Aug 27, 2010 | 02:54 PM
  #32  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Sorry, no shifter handles or mechanisms left.

Here is the steering wheel. $45 shipped

Reply
Old Aug 27, 2010 | 11:57 PM
  #33  
gta90's Avatar
Member
15 Year Member
Liked
iTrader: (1)
 
Joined: May 2008
Posts: 127
Likes: 1
From: Southwest
Car: 1990 GTA (T-Top)
Engine: 305 TPI (LB9) / 115k miles
Transmission: 4L60 (MD8 non-E)
Axle/Gears: 2.73 (GU2) 28 spline POSI (G80)
Re: 89 GTA partout

Originally Posted by thewizard
Still searching for some more tan interior screws.

The cargo cover retracts slow, but would be fine with a little attention.

No digital clusters unfortunately.

The 120mph cluster is at 199K (89 model), and the 140mph clusters are at 205K (87 model), and 136K (89 model). I don't think it's too tough to change them to match your chassis mileage if need be. All of the functions worked when I pulled them out of the cars.

gta90: I'd take $55 shipped for everything you are asking for, and I can hopefully find you a couple interior screws.

Taking offers on anything and everything. Feel free to PM me.

Thanks for looking.

PM sent
Reply
Old Aug 28, 2010 | 09:22 AM
  #34  
Utah GTA's Avatar
Junior Member
 
Joined: Jan 2009
Posts: 9
Likes: 0
From: Boise, ID
Car: 1989 Pontiac Trans Am GTA
Engine: L98 5.7L 350
Transmission: Automatic - 700R4
Axle/Gears: Borg Warner 3.27
Re: 89 GTA partout

Do you have a driver side seat bracket?
Reply
Old Aug 29, 2010 | 06:58 PM
  #35  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

^As in the bracket that bolts to the floorpan? If so, I do not.
Reply
Old Aug 30, 2010 | 12:10 PM
  #36  
91phoenix's Avatar
Senior Member
iTrader: (5)
 
Joined: Aug 2010
Posts: 916
Likes: 9
From: Wichita Falls, TX
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: 89 GTA partout

If the shifter indicator cover plate is still available let me know It would be shipped to 76301. Also how much for the split back seat backs with shipping. Will you separate them from the bottoms? Send a price and will respond.
Reply
Old Sep 9, 2010 | 06:30 PM
  #37  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Door panels, window switches, one fuse panel cover sold. Shift indicator is sold.

I have a worn out Megashifter if anyone wants that. $50 shipped with brackets.

Last edited by thewizard; Sep 15, 2010 at 11:57 AM.
Reply
Old Oct 13, 2010 | 06:24 PM
  #38  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

ttt
I still have lots of random mechanical bits around.
The Eagle wheels (3) are up for grabs too.
Reply
Old Nov 19, 2010 | 05:17 PM
  #39  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Still have a lot of random stuff listed above.

Added prices:

$35 shipped for the cluster cover panel

Check my profile for all threads started; I have a few other things that I'm dropping prices on to get out of my way.

Please feel free to make offers; I'm getting another car and really don't need these parts laying around.

Last edited by thewizard; Jun 14, 2011 at 08:22 AM. Reason: parts sold
Reply
Old Nov 20, 2010 | 04:58 PM
  #40  
WickedTTa's Avatar
Junior Member
iTrader: (2)
 
Joined: Oct 2010
Posts: 1
Likes: 0
Re: 89 GTA partout

Do you have a 3 spoke GTA steering wheel ?
Reply
Old Nov 20, 2010 | 07:22 PM
  #41  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

I do not have the older flat style if that's what you are looking for. I do have one example of each of the styles that were available in 89.
Reply
Old Nov 20, 2010 | 07:33 PM
  #42  
WickedTTa's Avatar
Junior Member
iTrader: (2)
 
Joined: Oct 2010
Posts: 1
Likes: 0
Re: 89 GTA partout

Do you have a pic of steering wheels ?
Reply
Old Nov 20, 2010 | 07:45 PM
  #43  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

Post 32 in this thread for the radio control wheel.

This is the best picture I have currently of the other style .


Last edited by thewizard; Nov 20, 2010 at 07:50 PM.
Reply
Old Nov 21, 2010 | 04:52 PM
  #44  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

...

Last edited by thewizard; Mar 31, 2011 at 06:19 PM. Reason: sold
Reply
Old Feb 21, 2011 | 10:09 PM
  #45  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

ttt

I do still have the WS6 sway bars if someone local wants those for cheap.

Tons of random interior parts left.
Reply
Old Mar 31, 2011 | 06:12 PM
  #46  
HighTechRedneck's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 46
Likes: 0
From: Andover, MN
Car: 1989 Trans Am GTA
Engine: 5.7L TPI
Transmission: 700R4
Axle/Gears: Stock 9bolt posi
Re: 89 GTA partout

Originally Posted by thewizard
Here is the 89 GTA wheel I have:

$25 + shipping
are the rims on that car for sale? specifically the front? if not the whole set? The gold 16's?
Reply
Old Mar 31, 2011 | 06:22 PM
  #47  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

I had a couple of the wheels left, but they were bent in one of the previous owners wrecks, and they sold a while back. Anything else you are looking for? I've got a handful of FS threads working right now.
Reply
Old Mar 31, 2011 | 06:51 PM
  #48  
HighTechRedneck's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 46
Likes: 0
From: Andover, MN
Car: 1989 Trans Am GTA
Engine: 5.7L TPI
Transmission: 700R4
Axle/Gears: Stock 9bolt posi
Re: 89 GTA partout

Originally Posted by thewizard
I had a couple of the wheels left, but they were bent in one of the previous owners wrecks, and they sold a while back. Anything else you are looking for? I've got a handful of FS threads working right now.

Not really, i wanted some fronts for my rear because the offset is different, and seeing as i am going to college i don't have too much money to throw at my car currently...
Reply
Old Mar 31, 2011 | 09:23 PM
  #49  
thewizard's Avatar
Thread Starter
Member
iTrader: (43)
 
Joined: Apr 2009
Posts: 122
Likes: 0
From: Kansas City
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: 89 GTA partout

I had considered doing the same thing at one point.

Here's a link to a thread where I have most of the remaining parts compiled from my exploits over the years: https://www.thirdgen.org/forums/inte...ests-misc.html
Reply
Old Apr 19, 2011 | 09:24 PM
  #50  
TA-Rocks's Avatar
Member
 
Joined: Jan 2009
Posts: 119
Likes: 0
From: southern Pa
Car: 87 GTA, 99 VFR800
Engine: 5.7 TPI wrong heads , 781cc
Transmission: 700R4
Axle/Gears: 3.08, msg me if u hav 3.42 4 sale
Re: 89 GTA partout

I need a steering colum for 89 automatic TA.

Rockmann007@yahoo.com
Reply



All times are GMT -5. The time now is 12:40 AM.