[WI] super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and ministarter
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and ministarter
I have for sale a pair of hooker super comp headers, 1-3/4" primary and 3" collector for 82-92 camaro. They were ceramic coated but got some oil burnt on them so the ceramic coating on the collector and part of the tube is coming off. Looking for SOLD
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for SOLD
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for SOLD
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
Weiand Stealth sbc intake manifold. $75
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for SOLD
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for SOLD
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for SOLD
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
Weiand Stealth sbc intake manifold. $75
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for SOLD
Last edited by scorchmaster; Apr 3, 2011 at 12:40 PM.
Senior Member
iTrader: (4)
Joined: Feb 2009
Posts: 588
Likes: 0
From: Camdenton, Mo/ St. Joseph, Mo
Car: 97 Cummins 92 CamaroZ28, 94 GSXR750
Engine: Modded 5.9 , carbed sbc358, modded
Transmission: Nv4500, 700R4 (for now)
Axle/Gears: stock
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Any pics of the exhaust setup? Any pics of it on the car as well?
Member
iTrader: (1)
Joined: Mar 2010
Posts: 103
Likes: 0
From: Fayetteville Ar
Car: 85 Firbird
Engine: 406
Transmission: 700r4 built
Axle/Gears: 3.42 posi 10 bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
What brand is the starter?
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Any pics of intake?
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
no pics of the exhaust setup on the car. I can grab some pics of everything tonight or tomorrow
Last edited by scorchmaster; Nov 15, 2010 at 08:38 AM.
Junior Member
iTrader: (1)
Joined: Sep 2009
Posts: 34
Likes: 0
From: NC
Car: 1990 Camaro RS (Racecar)/1991 Z28
Engine: 355 Race Engine/Stock TPI 350
Transmission: Borg Warner T5/Borg Warner T5
Axle/Gears: 4.10/2.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
What's your price on the header's shipped to 28144? and whats going on with them is a tube broken or are they slip fit?
THanks
THanks
Trending Topics
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
It's a slip fit. I'll PM you a shipping quote, I gotta get someone else one as well
Member
iTrader: (1)
Joined: Mar 2010
Posts: 103
Likes: 0
From: Fayetteville Ar
Car: 85 Firbird
Engine: 406
Transmission: 700r4 built
Axle/Gears: 3.42 posi 10 bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
So what brand is the starter?
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
I'll get it off the starter tonight and get a pic of it
Want a title? Post!
Joined: Mar 2009
Posts: 0
Likes: 0
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
I have for sale a pair of hooker super comp headers, 1-3/4" primary and 3" collector for 82-92 camaro. They were ceramic coated but got some oil burnt on them so the ceramic coating on the collector and part of the tube is coming off. Looking for $200
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for $100
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for $175
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for $40
I also have dual 3" exhaust made for a 82-92 camaro to run off the super comps. The exhaust exits under the car just past the front seats. They have bullet mufflers and turn downs. Muffers are dents on the bottom from hard bumps. Looking for $100
COAN 9" 4500 stall th400 converter with dual bolt pattern. Paint is a little rough but only has 200 street miles on it and 20 passes. $300
Holley 750 double pumper carb witht he choke milled off. Looking for $175
Brodix HV1016 dual plane intake manifold for a SBC, has an-8 coolant lines running from corner to corern. In good condition. Costs over $200 from brodix new. Looking for $100
High torque mini starter with staggered bolt pattern, fits 168 tooth flywheels. Low miles, owned for a few months. Looking for $40
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
I may be interested in the super comps. Will you ship intl?
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Joined: Jun 2000
Posts: 5,364
Likes: 51
From: Enschede, Netherlands
Car: 82 TA 87 IZ L98 88 IZ LB9 88 IZ L98
Engine: 5.7TBI 5,7TPI 5.0TPI, 5,7TPI
Transmission: T5, 700R4, T5, 700R4
Axle/Gears: 3.08, 3.27, 3.45, 3.27
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
dang it's as easy as dropping them off at the post office Junior Member
iTrader: (1)
Joined: Sep 2009
Posts: 34
Likes: 0
From: NC
Car: 1990 Camaro RS (Racecar)/1991 Z28
Engine: 355 Race Engine/Stock TPI 350
Transmission: Borg Warner T5/Borg Warner T5
Axle/Gears: 4.10/2.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
starter pic added, still not sure what brand it is but it works great. Sounds like a jet engine when engaged
Member
iTrader: (1)
Joined: May 2010
Posts: 186
Likes: 0
Car: 1984 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3:73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
How much for exhaust shipped to 11010. Will it fit a 84 t/a?
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 844
Likes: 0
From: Long Island, NY
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
i guess the shipping on the duals to NY 11727 would be a little pricey huh?
Thread Starter
Member
iTrader: (6)
Joined: Jul 2003
Posts: 463
Likes: 0
From: Milwaukee, WI
Car: 1984 z28
Engine: BBC
Transmission: TH400
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
My guess would be in the $30's, I can get a box and get a quote if that price is ok with you
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 844
Likes: 0
From: Long Island, NY
Car: 1987 GTA
Engine: 645hp/656 ft lb Blown 383
Transmission: 700-R4 3,000 stall
Axle/Gears: 3.55 moser 12-bolt
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
pm sent. thanks!
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Still have the duals for sale? pm me asap im very interested like want them yesterday 
Member
Joined: Jan 2005
Posts: 218
Likes: 0
From: Fort Wayne, Indiana
Car: 85 IROC
Engine: 385AFR head, Mini Ram Intake
Transmission: 6 Sp.
Axle/Gears: 3.73
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
DId you sell the intake yet. Shipping to 46816
Junior Member
Joined: Aug 2009
Posts: 10
Likes: 0
Re: super comps, dual 3" exhaust, COAN converter, 750 carb, brodix intake and minista
Thank you verry much scorchmaster,,,,i got the converter in the mail today.
good job packing....I will tell you that is one tiny converter next to all the 11" and 12" ones i have....
good job packing....I will tell you that is one tiny converter next to all the 11" and 12" ones i have....
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
Aug 17, 2015 02:00 PM
