http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback


Sold Parts:

Radio Pod
Steering Box
Steering Column and Steering Wheel
Cat Converter
Sill Panels
Interior Shifting Mechanism
Speaker Covers
Complete Headliner
Heater Core + Interior Heater Core Cover
Headlight Module
Dome Light Housing
T-Top Center Bar
Complete Seat Belt Setup
Seat Guide Black Trim Covers (x4)
Windshield Wiper Motor
Complete Tail Light Assembly w/ Center Trim
Passenger Side Performance Suspension Trim Panel
Both Headlight Motors
Brake Pedal/Pedal Arm (rest of assembly still available)
All Side Moldings
Hatch Motor
Power Mirrors w/ Switch and Harness
Third Brake Light
Torque Converter Cover
Shift ****
Both Door Panels (bare)
Gauge Cluster
Dash Pad
Hatch Struts
Gauge Cluster Trim
Both Sun Visors
Rear View Mirror
Lower Front Interior HVAC Piece
HVAC Interior Control Panel Hoses
Complete Serpentine Assembly (except A/C Compressor)
Headliner
Radio Harness


Hello Third Gen gurus, my name is Keith and I have been apart of these forums for a long time and you guys have really helped me out of jams while restoring my 1990 Formula 305 after this wreck in 2002. Since then I have done small swapping like fuel tanks and some interior. Now I am going to part out the car piece by piece. I am a member of GMMOC and have purchased very cool parts off here, like the air induction box and lid for the power bulge hood.

Here is the 1989 Formula, the black paint on it was brand new when I purchased it and was done by a local talented painter.



I smacked a pine tree going about 30MPH due to ice and that is what was done after removing everything. Anything except the block + internal components and transmission is for sale.


The car has been kept under tarps and always in this dog house covering 90% of the car from the elements, especially rain.




You can see some of the very nice parts at the rear of the car

Thanks for looking and you can contact me at krhallman@gmail.com


Remember, everything except the block + internal engine parts and transmission is for sale, although I have a spare 700R4 tranny for sale



Edit*

I wanted to mention I also sale a lot of computer hardware and I have a Heatware account you can read on things I've sold there worth hundreds, but I just recently started that after moving computer hardware forums:

http://www.heatware.com/eval.php?id=66800

 

Price of spoiler,do you still have the driver side fender? and air cleaner price

 

Is the spoiler the factory one or a fiberglass unit?

 

Spoiler is factory rubber, no major problems with it yet though

Also I wanted to mention this is obviously a WS6 car and the suspension and associated materials only have ~92k miles on them. The quality of parts here is very high and is pretty much a complete 90 Formula minus what I'm keeping.

 

remove post

 

huh?

 

didn't mean to post that specific post

 

Pictures!
















Rear Wing





Wing Damage:

















See all here

http://ws6zep89.picturepush.com/albu...-Part-Out.html

 

Ill take the spoiler.Whats the price?

 

well right now I have 3 different people asking for the spoiler, but you were first by 30 minutes. I'll PM you once I get a price figured out.

 

doors? how much.

 

for both doors you are talking above $100 for shipping unless you are planning to come pick them up. Both doors have power everything and are in top shape, seen here:



I assume you also want the windows and side view mirrors?

PM me and we'll get into the details.

 

Also wanted to mention I have some various parts for sale off the 90 Formula including axles, drive shaft, at least 1 catalytic converter, various straps and mounts for suspension and rear end. I will also have a spare rear end (open 2.73) for sale once I complete the engine swap. I also have a spare, spare tire



You can see some of spare tire here:





I just took some shots of loose parts that could easily be pulled out and shown:





Obviously I have the rest of the parts that match these, like the other 3 springs.


Here is another shot of the door, showing it is still straight and undamaged, the other door is the same. The side view mirrors have been taken off and put inside to protect them.

 

I also wanted to mention that I have an active ebay account with a long history.

http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback

and remember guys, anything on this car is available except the main part of the motor (meaning non essentials motor bay parts are still for sale) and the transmission. Everything from the drive shaft back is for sale and everything inside.

Thanks for your interest.

 

would you cut out part of the door piller for me from the lower hinge down and about 4 inches of rocker ?

 

depends on the cash, that is a decent amount of work.

 

this is what i need you could cut threw the door post and inner fender. threw the rocker and along the edge of the floor. if its rust free i will give ya $100 BUCKS If the interior is out should only take about ten minutes with a saws all.

 

would you take both doors for $200 so I don't have one like this?

 

What's the miles on the gauge cluster and do all the gauges work?

 

all gauges work, but you'll have to let me check the mileage; I would guess about 135k

 

1

 

Price shipped to 77504 for the gauge cluster

 

I was wrong on the mileage, thinking about the other car. This one has under 100k

 

I've been in rough shape physically from my pain so all inquiries will have to hold for a bit.

 

I would like the doors how much for both with door cards, mirrors, and glass?
shipped to 66801

 

I forgot what you said about the front struts. Hows the condition? And any after market rear assembly? And how are your U joints?

 

all suspension pieces must be disassembled from the car and it's obvious the passenger side front suspension is iffy, but all parts are there and for sale. All suspension pieces should be in great shape with less than 100k miles on them. 88Trans email me at krhallman@gmail.com, you are interested in too many pieces to keep up with the convo on a forum.

The U Joints are 100% for sure good and the aftermarket rear assembly has to do with what is in my blue Firebird, not this one. This has a 2.73 Open with ~100k miles on it for sale.

 

Im sorry man i just Emailed you. And hmm that sounds cool.Prices?

 

_____________________________

Bump/Update

_____________________________

Hey guys, I haven't really gone into it, but I thought I would talk about it. I am a chronic severe neck pain patient who is trying to get money together to pay medical bills; this is because my condition is still a mystery outside of the structural problem:




You can see how this happened in a quick video, I am 54 in the right bottom corner of your screen and I'll be going for the tail back, it plays again in slow mo:

http://youtu.be/gnFTDXyGCsI

I had two shoulder surgeries for football so I didn't have good shoulders, instead I hit people with my head up and my face mask to any side of their helmet. I probably did this a few hundred times and then you get where I am now.

Right now I am refusing to be on disability because of my conservative views, even though I am unable to hold down a job due to 24/7 pain and had to leave Electrical Engineering my Jr year at a top 20 Engineer School in the US (NCSU) + an IT Job for the Dept Waste Management.

Anyway I really need to sell these parts and I appreciate any interest in them. I took some new pictures after wiping stuff off with some Windex:










see it all here: http://picturepush.com/+WOUN


Obviously the parts are not perfectly clean as I just gave it a quick wipe down. I am showing these parts because I have had interest in them in terms of PM.

However please PM me about any part you would find on an 89 Formula 305 TBI and most likely I have it for sale.


Thanks for your time and sorry if I rambled haha,
Keith

 

bump

 

how much for the ws6 center caps?

 

sorry I have a solid buyer from GMMOC on the entire wheels

 

How much for the gauge cluster please shipped to VA 23456 thanks

 

you mean the entire thing?

like this to the speedo:

 

Well I need the speedo. Mine stop working.

 

interested in side marker socket and fog light sockects shipped 20735 will purchase asap!!!!

 

bump, everything is still for sale, nothing has been purchased yet.

 

Here are a set of hood lifts I pulled today

 

Under the spoiler is the 3rd light plastic housing to 33435 thx.

 

still plenty of exterior parts for sale along with interior, PM me with requests and I will pull parts and send pictures.

 

Dome light to 85037

 

do you need the entire thing? housing, wiring, bulb etc? I can pull it today/tomorrow and PM pictures tonight/tomorrow.

 

I need the entire plastic housing, mine is burnt to a crisp but it still works so just the plastic

 

Do you still have the rims?

 

Pulled dome, PM coming.

I do have the rims, 3 perfect ones and one that was slightly damaged on the edge when it slid over the curve. I'll get pictures when it's daylight again.

 

When you say slightly damaged, is it bent or just rashes a bit? Will it balance out and not shake? I'm definitely interested in them if they'll be ok.

 

Let me take a closer look at it, it has been a while since I had them out. What happened is I slid over a curb going about 20-30mph and the right front wheel hit parallel to the curb and jumped over it. I will get you pictures as soon as I can.

 

Ok, I'll be waiting on them. I would also like to know kinda what you might want for them.

 

Items Gone or On The Way Out:

Radio Pod
Cat Converter
Headlight Motor
Hatch Motor
Power Mirrors and Switch
Rear Tailight Assembly + Center (possibly still up for sale)
Third Brake Light
Dome Light Housing
Converter Cover
Door Panels Upper Trim

anything else is still up for grabs.

 

OK Keith, Returning customer here.....

Assuming it's gray as well, Price including shipping (32680) on the rear head liner trim panel (You would remove this to gain access to the hatch glass hinge screws). But..... This piece MUST be free of cracks and bows from over tightened screws and in over-all Good condition.

Just seen the door sills in another thread, No cracks ? Price them as well......




Thanks