[NH] Lots of Third gen parts (see gallery) - in NH

Thread Tools
 
Search this Thread
 
Old May 31, 2012 | 09:41 AM
  #1  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Lots of Third gen parts (see gallery) - in NH

Hi,

I recently picked up a 1984 Z28 and also had the opportunity to also buy a nice lot of parts, many NOS, some used and in great to excellent condition. About 1/3 of this I am keeping, and the rest is for sale, at reasonable prices, please.

I have posted pictures of what is for sale in an album here:
https://www.thirdgen.org/forums/album.php?albumid=6496

I know there is a mix of interior and drivetrain/engine parts and I apologize for the mixed parts post. I will only list parts below that make sense for this particular board. As items sell they will be removed from the list below and the image removed from the gallery.

I have no other parts for sale than what is below.

Buyer is responsible for the shipping cost.

Make offers - I am interested in selling, not keeping, this stuff.

Headlight switch and pull rod used - 40.00 (make an offer)
Rear seat latch used - 15.00 (make an offer)
1982-1989 cig. Lighter used (2) exc. cond - 12.00 for both
Door sills grey (2 sets) - 20.00 per set. 30.00 for both (make an offer)
Window cranks w/clips and spacers excellent condition (used) - 15.00 (make an offer)
NOS Exhaust riser 1984 Z28 (code 305) - 50.00 (make an offer)
1982-1984 dashboard harness, manual Trans. (used, works fine) - 30.00 (make an offer)
Upper center dashboard mounting bracket (1982-1992) - 10.00 (make an offer)
Idler arm (used) Very good cond. - what is this worth? 30.00?? (make an offer)
Carpet: sand grey, 2yrds (not molded, in rolls of 1 yd each) - 20.00/yd, 30.00 for both
Dri vers-side mirror assembly (Used, works good, needs paint), 20.00 (make an offer)
Ashtray - back seat - used, good condition - 12.00 (make an offer

Thanks for looking,

Shepp

Last edited by Shepp84Z28; Aug 31, 2012 at 07:08 AM. Reason: Kicker panels L/R (grey) - SOLD
Reply
Old May 31, 2012 | 10:14 AM
  #2  
majobis's Avatar
Senior Member
iTrader: (3)
 
Joined: Jul 2008
Posts: 634
Likes: 3
From: Massachusetts
Car: 1987 IROC Z w/T-Tops
Engine: 305 TPI
Transmission: Automatic
Axle/Gears: G92
Re: Lots of Third gen parts (see gallery) - in NH

Location in NH?
Reply
Old May 31, 2012 | 10:16 AM
  #3  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by majobis
Location in NH?
Hi,

Rockingham county - southeast corner of the State. Near by are Derry, Raymond, Plaistow. Feel free to PM me for detailed address if interested in parts.

Thank you,

Shepp
Reply
Old May 31, 2012 | 05:23 PM
  #4  
Confuzed1's Avatar
Supreme Member
iTrader: (4)
 
Joined: Oct 1999
Posts: 4,211
Likes: 3
From: GO PACK GO
Car: 83Z28 HO
Engine: Magnacharged Dart Little M 408
Transmission: G Force 5 speed
Axle/Gears: Moser 9" w/Detroit Trutrac
Re: Lots of Third gen parts (see gallery) - in NH

I'm beginning to look at getting my interior in order. Original color on my '83 is Sand Gray actually. I'm probably interested in the carpet (is it the original molded?) and it would need to be in like new condition, maybe the kick plates if the right color, as well as the 5 speed plate/w leather boot you have (do you have better pics?) I know you said you prefer local, but let me know.

Please PM me with a price for any of this. - Thanks

Last edited by Confuzed1; May 31, 2012 at 05:30 PM.
Reply
Old May 31, 2012 | 06:46 PM
  #5  
my82roc's Avatar
Supreme Member
20 Year Member
iTrader: (101)
 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Lots of Third gen parts (see gallery) - in NH

How much for the 2 console clocks?
Reply
Old May 31, 2012 | 09:06 PM
  #6  
Andrew James's Avatar
Member
iTrader: (3)
 
Joined: Sep 2011
Posts: 310
Likes: 0
From: Batesville, AR
Car: 1990 Formula Firebird
Engine: 350 (5.7) TPI
Transmission: WC T5
Axle/Gears: 3.42 POSI
Re: Lots of Third gen parts (see gallery) - in NH

How much for shifter plate? Is it for a Camaro or Bird?
Reply
Old Jun 1, 2012 | 08:10 AM
  #7  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

I've sent PM to everyone asking about prices, etc.

Shepp
Reply
Old Jun 1, 2012 | 08:12 AM
  #8  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Its from a Camaro (Z28). I sent a PM with asking price

Shepp
Reply
Old Jun 5, 2012 | 03:58 PM
  #9  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Only the steering wheel sold, if you think my price is too high, please make a counter-offer... I want to sell this stuff, not store it.

Peace,
Shepp
Reply
Old Jun 5, 2012 | 07:05 PM
  #10  
my82roc's Avatar
Supreme Member
20 Year Member
iTrader: (101)
 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Lots of Third gen parts (see gallery) - in NH

20 dollars shipped for the 2 clocks
Reply
Old Jun 5, 2012 | 08:18 PM
  #11  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

I'll take the 20.00 but shipping cost is on you.

Let me know
Shepp
Reply
Old Jun 11, 2012 | 12:55 PM
  #12  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

I'm very surprised that only the steering wheel from this lot has sold.

Shepp
Reply
Old Jun 13, 2012 | 07:54 AM
  #13  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Clutch pedal assy - sold!
Reply
Old Jun 13, 2012 | 09:07 AM
  #14  
chazman's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Dec 2001
Posts: 9,946
Likes: 644
From: Chicagoland
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: Lots of Third gen parts (see gallery) - in NH

Do you have pics of the shifter plate out of the bag?
Reply
Old Jun 13, 2012 | 10:08 AM
  #15  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Here you go...

I will add to the gallery later as well - unless its sold soon

Ashtray is also included (I opened the lid, its in there and clean).

Shepp
Attached Thumbnails Lots of Third gen parts (see gallery) - in NH-boot.jpeg  
Reply
Old Jun 13, 2012 | 10:43 AM
  #16  
chazman's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (4)
 
Joined: Dec 2001
Posts: 9,946
Likes: 644
From: Chicagoland
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: Lots of Third gen parts (see gallery) - in NH

Can you post it any bigger?
Reply
Old Jun 13, 2012 | 11:04 AM
  #17  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

try this:
https://www.thirdgen.org/forums/memb...7-photo-8.html

Shepp
Reply
Old Jun 13, 2012 | 11:39 AM
  #18  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Shift plate w/Boot is now sold.

Shepp
Reply
Old Jun 13, 2012 | 03:51 PM
  #19  
Richboll's Avatar
Supreme Member
 
Joined: Apr 2011
Posts: 1,051
Likes: 0
From: Huntsville, AL
Car: 89 Black IROC-Z convertible
Engine: 305 TBI
Transmission: Auto
Re: Lots of Third gen parts (see gallery) - in NH

I need a sunvisor base. I think the T-Top and Convertible are the same. Anything?
Reply
Old Jun 13, 2012 | 04:00 PM
  #20  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Hi Rich,

Those are actually parts I am keeping from the stuff I bought, sorry man (I need them too, lol). I need a headliner and luckily this guy had the mounting brackets for the sun visors when I get the headliner next year.

What I have posted is what is for sale.

take care,
Shepp
Reply
Old Jun 13, 2012 | 07:26 PM
  #21  
Richboll's Avatar
Supreme Member
 
Joined: Apr 2011
Posts: 1,051
Likes: 0
From: Huntsville, AL
Car: 89 Black IROC-Z convertible
Engine: 305 TBI
Transmission: Auto
Re: Lots of Third gen parts (see gallery) - in NH

Thanks for the reply. Good luck with your build!
Reply
Old Jun 16, 2012 | 08:09 PM
  #22  
my82roc's Avatar
Supreme Member
20 Year Member
iTrader: (101)
 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Lots of Third gen parts (see gallery) - in NH

I'll still offer you 20 shipped for the 2 non working clocks
Reply
Old Jun 18, 2012 | 11:07 AM
  #23  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by my82roc
I'll still offer you 20 shipped for the 2 non working clocks
Make it 25 and you've got a deal...
Reply
Old Jun 18, 2012 | 06:29 PM
  #24  
my82roc's Avatar
Supreme Member
20 Year Member
iTrader: (101)
 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Lots of Third gen parts (see gallery) - in NH

Ok Ill take them for 25
Reply
Old Jun 19, 2012 | 08:13 AM
  #25  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by my82roc
Ok Ill take them for 25
Great, I've sent you a PM with my paypal info.

Shepp
Reply
Old Jun 19, 2012 | 12:39 PM
  #26  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Still a lot of parts for sale, make offers as I am motivated to move these.

Shepp
Reply
Old Jun 20, 2012 | 09:54 PM
  #27  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Clocks are sold now
Reply
Old Jun 21, 2012 | 01:16 PM
  #28  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Kick plates with carpet, Grey (used) excellent cond. - Sold

Shepp
Reply
Old Jun 21, 2012 | 08:11 PM
  #29  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

T5 Transmission is also sold
Reply
Old Jun 21, 2012 | 10:09 PM
  #30  
weerock's Avatar
Want a title? Post!
 
Joined: Apr 2012
Posts: 0
Likes: 0
From: Ontario
Car: 87 Iroc Z
Engine: 305
Transmission: 5 Speed
Re: Lots of Third gen parts (see gallery) - in NH

Could you post a picture of the top door rails please?

Thanks
Reply
Old Jun 22, 2012 | 09:31 AM
  #31  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by weerock
Could you post a picture of the top door rails please?

Thanks
Already posted here:

https://www.thirdgen.org/forums/albu...ictureid=33003

and here:

https://www.thirdgen.org/forums/albu...ictureid=33002

Shepp
Reply
Old Jun 22, 2012 | 11:05 PM
  #32  
weerock's Avatar
Want a title? Post!
 
Joined: Apr 2012
Posts: 0
Likes: 0
From: Ontario
Car: 87 Iroc Z
Engine: 305
Transmission: 5 Speed
Re: Lots of Third gen parts (see gallery) - in NH

How much to ship to 13624?
Reply
Old Jun 23, 2012 | 11:02 AM
  #33  
WildRidez's Avatar
Junior Member
 
Joined: Jan 2010
Posts: 28
Likes: 0
From: Austin, TX
Car: 96 SS, 72 SS, 06 TBSS
Re: Lots of Third gen parts (see gallery) - in NH

would you take 10 shipped for the back speaker covers (the plastic) to 78745?
Reply
Old Jun 23, 2012 | 05:27 PM
  #34  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by weerock
How much to ship to 13624?
40 shipped, odd shaped box.

PM if you would like to buy.

Shepp
Reply
Old Jun 23, 2012 | 05:32 PM
  #35  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by WildRidez
would you take 10 shipped for the back speaker covers (the plastic) to 78745?
No, that would be silly of me.
18.00 shipped to tx

Shepp
Reply
Old Jun 23, 2012 | 05:55 PM
  #36  
my82roc's Avatar
Supreme Member
20 Year Member
iTrader: (101)
 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Lots of Third gen parts (see gallery) - in NH

Got the clocks yesterday.Powered them up and they both work great...Thanks so much
Reply
Old Jun 23, 2012 | 06:15 PM
  #37  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by my82roc
Got the clocks yesterday.Powered them up and they both work great...Thanks so much
Wow, then you should put 20.00 more in my PayPal, heh
Reply
Old Jun 26, 2012 | 12:02 PM
  #38  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Still more items to sell



Shepp
Reply
Old Jun 26, 2012 | 12:37 PM
  #39  
corlando52's Avatar
Member
iTrader: (1)
 
Joined: Oct 2008
Posts: 148
Likes: 0
From: Centereach, NY (Long Island)
Car: 1984 Firebird SE
Engine: 2.8 L
Transmission: Automatic
Re: Lots of Third gen parts (see gallery) - in NH

I am looking for a gas pedal pad, just the pad, in good shape. Do you have one for sale? Thanks!

Chris
Reply
Old Jun 26, 2012 | 02:54 PM
  #40  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by corlando52
I am looking for a gas pedal pad, just the pad, in good shape. Do you have one for sale? Thanks!

Chris
Hi Chris,

Sorry I do not. Everything I have for sale is listed above or in my other thread for Engine/Tranny parts here:
https://www.thirdgen.org/forums/engi...gen-parts.html

Thanks for asking,

Shepp
Reply
Old Jun 28, 2012 | 01:27 PM
  #41  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Lets sell this lot!!
Shepp
Reply
Old Jul 1, 2012 | 05:35 AM
  #42  
romcjr's Avatar
Junior Member
iTrader: (1)
 
Joined: May 2011
Posts: 44
Likes: 0
From: Waller,TX.
Car: 1984 Z28 HO
Engine: GMPP 350 HO
Transmission: 700R4 w/TCI streetfighter kit
Axle/Gears: 3.73 28 spline Eaton posi
Re: Lots of Third gen parts (see gallery) - in NH

Sorry,just found this post.Do you still have the new guage cluster and the seat recliners and the sail panels?Thanks.
Reply
Old Jul 1, 2012 | 08:39 AM
  #43  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Originally Posted by romcjr
Sorry,just found this post.Do you still have the new guage cluster and the seat recliners and the sail panels?Thanks.
Hi,
Yes I do. Let's negotiate a good package price. PM me.

Shepp
Reply
Old Jul 3, 2012 | 12:34 PM
  #44  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Both dashboard clusters - SOLD
Power Steering pump - SOLD
Sail panels SANS fabric - SOLD
Speaker brackets - SOLD
Reply
Old Jul 3, 2012 | 02:43 PM
  #45  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

NOS Seat recliners L/R - SOLD
Reply
Old Jul 9, 2012 | 09:46 AM
  #46  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Everything in the list above still for sale... let's make a deal.

Shepp
Reply
Old Jul 10, 2012 | 02:37 PM
  #47  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Motivated seller... lets make a deal



Shepp
Reply
Old Jul 11, 2012 | 03:11 PM
  #48  
C.Cannon's Avatar
Junior Member
iTrader: (1)
 
Joined: Oct 2002
Posts: 55
Likes: 0
From: Ontario
Car: 1989 IROC-Z Hardtop
Engine: L98 w/SLP Performance Package
Transmission: 700R4
Axle/Gears: Borg-warner 9 bolt
Re: Lots of Third gen parts (see gallery) - in NH

I purchased a lighter from Shepp yesterday, paid with PayPal and he shipped the item next day.

Thanks Shepp.
Reply
Old Jul 12, 2012 | 10:29 AM
  #49  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

You're welcome buddy!

Shepp
Reply
Old Jul 16, 2012 | 04:51 PM
  #50  
Shepp84Z28's Avatar
Thread Starter
Junior Member
iTrader: (5)
 
Joined: May 2012
Posts: 21
Likes: 0
From: NH
Car: 1984 Z28, 2004 F-250
Engine: 305 in the Z28, 10-Cyl in the F250
Transmission: 5-Speed in the Z28, F2250=Auto
Re: Lots of Third gen parts (see gallery) - in NH

Bump
Reply



All times are GMT -5. The time now is 11:51 AM.